10ETS..FPPbF High Voltage Series
Vishay High Power Products
Input Rectifier Diode TO-220 FULL-PAK, 10 A
DESCRIPTION
Base cathode
The 10ETS12FPPbF rectifier series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150 °C junction temperature.
Available
RoHS*
COMPLIANT
TO-220AC FULL-PAK
1 Cathode
3 Anode
PRODUCT SUMMARY
VF at 10 A IFSM VRRM < 1.1 V 200 A 800/1200 V
Typical applications are in input rectification and these products are designed to be used with Vishay HPP switches and output rectifiers which are available in identical package outlines. Fully isolated package (VINS = 2500 VRMS) is UL E78996 approved This product has been designed and qualified for industrial level and lead (Pb)-free (“PbF” suffix).
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS Capacitive input filter TA = 55 °C, TJ = 125 °C common heatsink of 1 °C/W SINGLE-PHASE BRIDGE 12.0 THREE-PHASE BRIDGE 16.0 UNITS A
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL IF(AV) VRRM IFSM VF TJ 10 A, TJ = 25 °C CHARACTERISTICS Sinusoidal waveform Range VALUES 10 800/1200 200 1.1 - 40 to 150 UNITS A V A V °C
VOLTAGE RATINGS
PART NUMBER 10ETS08FPPbF 10ETS12FPPbF VRRM, MAXIMUM PEAK REVERSE VOLTAGE V 800 1200 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 900 1300 IRRM AT 150 °C mA 0.5
ABSOLUTE MAXIMUM RATINGS
PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current Maximum I2t for fusing Maximum I2√t for fusing SYMBOL IF(AV) IFSM I2t I2 √ t TEST CONDITIONS TC = 105 °C, 180° conduction half sine wave 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied t = 0.1 to 10 ms, no voltage reapplied VALUES 10 170 200 130 145 1450 A2 s A2√s A UNITS
* Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94335 Revision: 23-Apr-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1
10ETS..FPPbF High Voltage Series
Vishay High Power Products
Input Rectifier Diode TO-220 FULL-PAK, 10 A
ELECTRICAL SPECIFICATIONS
PARAMETER Maximum forward voltage drop Forward slope resistance Threshold voltage Maximum reverse leakage current SYMBOL VFM rt VF(TO) IRM TEST CONDITIONS 10 A, TJ = 25 °C TJ = 150 °C TJ = 25 °C TJ = 150 °C VR = Rated VRRM VALUES 1.1 20 0.82 0.05 0.50 UNITS V mΩ V mA
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, junction to ambient Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style TO-220 FULL-PAK (94/V0) SYMBOL TJ, TStg RthJC RthJA RthCS Mounting surface, smooth and greased DC operation TEST CONDITIONS VALUES - 40 to 150 2.5 62 0.5 2 0.07 6 (5) 12 (10) 10ETS12FP g oz. kgf · cm (lbf · in) °C/W UNITS °C
Mounting torque Marking device
www.vishay.com 2
For technical questions, contact: diodes-tech@vishay.com
Document Number: 94335 Revision: 23-Apr-08
10ETS..FPPbF High Voltage Series
Input Rectifier Diode TO-220 FULL-PAK, 10 A
150 140
Vishay High Power Products
20 18
Maximum Average Forward Power Loss (W)
10ETS.. Series RthJC (DC) = 2.5 °C/W
Maximum Allowable Case Temperature (°C)
16 14 12 10 8 6 4 2
130 120 110 100 90 80
Ø
Conduction angle
DC 180° 120° 90° 60° 30° RMS limit
Ø
30° 60° 90° 120° 8 10 180°
Conduction period 10ETS.. Series TJ = 150 °C 0 2 4 6 8 10 12 14 16
0
0
2
4
6
12
Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
Average Forward Current (A)
Fig. 4 - Forward Power Loss Characteristics
150 140 130 120 110 100 90
10ETS.. Series RthJC (DC) = 2.5 °C/W
200 180
Maximum Allowable Case Temperature (°C)
Peak Half Sine Wave Forward Current (A)
160 140 120 100 80 60
Ø
At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s
Conduction period
30° 60° 90° 120° 0 2 4 6 8 10 180° 12 14 DC
10ETS.. Series
40
16
18
1
10
100
Average Forward Current (A)
Fig. 2 - Current Rating Characteristics
Number of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
16
Maximum Average Forward Power Loss (W)
14 12 10 8 6
Peak Half Sine Wave Forward Current (A)
180° 120° 90° 60° 30° RMS limit
240 220 200 180 160 140 120 100 80 60 40
10 0.01
Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s
Ø
4 2 0
Conduction angle
10ETS.. Series TJ = 150 °C 0 2 4 6 8
10ETS.. Series
0.1
1.0
Average Forward Current (A)
Fig. 3 - Forward Power Loss Characteristics
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
Document Number: 94335 Revision: 23-Apr-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 3
10ETS..FPPbF High Voltage Series
Vishay High Power Products
Instantaneous Forward Current (A)
100
Input Rectifier Diode TO-220 FULL-PAK, 10 A
TJ = 25 °C TJ = 150 °C
10
10ETS.. Series
1
0
0.5
1.0
1.5
2.0
2.5
3.0
Instantaneous Forward Voltage (V)
Fig. 7 - Forward Voltage Drop Characteristics
10
ZthJC - Transient Thermal Impedance (°C/W)
Steady state value (DC operation)
1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08
Single pulse
10ETS.. Series
0.1 0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 8 - Thermal Impedance ZthJC Characteristics
www.vishay.com 4
For technical questions, contact: diodes-tech@vishay.com
Document Number: 94335 Revision: 23-Apr-08
10ETS..FPPbF High Voltage Series
Input Rectifier Diode TO-220 FULL-PAK, 10 A
ORDERING INFORMATION TABLE
Device code
Vishay High Power Products
10
1 1 2 3 4 -
E
2
T
3
S
4
12
5
FP
6
PbF
7
Current rating (10 = 10 A) Circuit configuration: E = Single diode Package: T = TO-220AC Type of silicon: S = Standard recovery rectifier 08 = 800 V 12 = 1200 V
5 6 7
-
Voltage rating FULL-PAK None = Standard production PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95005 http://www.vishay.com/doc?95009
Document Number: 94335 Revision: 23-Apr-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 5
Outline Dimensions
www.vishay.com DIMENSIONS in millimeters
10.6 10.4 Hole Ø 3.4 3.1 2.8 2.6
Vishay Semiconductors
3.7 3.2
7.31 6.91
16.0 15.8
16.4 15.4
10°
3.3 3.1 13.56 13.05
2.54 TYP.
0.9 0.7 2.54 TYP.
0.61 0.38 2.85 2.65 Lead assignments Diodes 1 + 2 - Cathode 3 - Anode 1.4 1.3
1.15 TYP. 1.05
R 0.7 (2 places) R 0.5
4.8 4.6
5° ± 0.5°
5° ± 0.5°
Conforms to JEDEC outline TO-220 FULL-PAK
Revision: 20-Jul-11
Document Number: 95005 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1