110E1G56F204PB

110E Vishay Spectrol Mechanical Encoder FEATURES • Cost Effective - Eliminates A/D Converters • High Resolution - Up to 36 Positions • Stability - Operating Range of - 40°C to + 105°C • Variability - Horizontal and Vertical Mounting The Model 110E is a 7/8” square mechanical encoder which provides a 2 - bit grey code for relative reference and a 4 - bit grey code for absolute reference applications. Manually operated it has a rotational life of 100,000 shaft revolutions, a positive dentent feel and can be combined with a second modular section in a concentric - shaft construction. Its small size makes it suitable for panel-mounted applications where the need for costly front - panel displays can be completely eliminated. DIMENSIONS in inches 2 - BIT, 36 - POSITION INCREMENTAL OUTPUT STEP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 2 - BIT 36 POS. ± 0.005 0.068 ± 0.005 0.047 0.375 0.320 (2X) 0.156 0.245 0.625 0.050 (2X) 0.900 0.450 0.100 (2X) Ø.047 (7X) 0.300 0.600 PC TERMINALS TYPE B - 110 0.343 0.830 ± 0.005 SQUARE + 0.002 0.250 - 0.001 3/8 - 32 UNEF - 2A 0.320 4 - BITS, 6 - POSITION INCREMENTAL OUTPUT STEP 1 4 2 G 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 G 2 0.615 0.250 0.100 TYP 0.100 (2X) TYPE “B” MTG WITH BRACKET 0.250 2 - BIT 16 POS. PC TERMINALS TYPE C - 30 0.343 15 16 4 - BIT 16 POS. SOLDER HOOK TERMINALS (ON 0.200 SPACING) 0.100 0.200 REF 2 - BIT 24 POS. 0.156 0.363 Ø.047 0.830 ± 0.005 0.450 (2X) SQUARE 0.600 (2X) 0.020 X 0.025 THK 1 4 2 G 8 Output Codes At start position, step 1, is with shaft flat at 12 o’ clock position when looking at shaft end with terminals down. 0.415 0.100 TYP 0.100 (2X) TYPE “C” MTG WITH BRACKET 0.100 (2X) SHAFT DIMENSIONS FLATTED SHAFT 3/4”, 7/8”, F.M.S. 0.218 0.047 Ø SUGGESTED 0.060 0.005/0.010 R 0.206 ± 0.010 SUGGESTED www.vishay.com 136 For technical questions, contact: sfer@vishay.com Document Number: 57089 Revision: 05-Aug-04 110E Mechanical Encoder Vishay Spectrol ELECTRICAL SPECIFICATIONS Output 2 - bit grey code, channel L leads channel R by 90 degrees electrically in the CW direction 4 bi - grey code, absolute electrical position output 5Ω maximum 100KΩ minimum Resistance load 250mA at 28VDC Switching Loads Bounce Dielectric Withstanding Voltage Electrical Travel Operating Speed 1.5mA at 115VDC 150mA at 14VDC 5ms/cycle at 15 RPM 1000VAC at sea level Continuous 50 RPM maximum Closed Circuit Resistance Open Circuit Resistance Contact Rating MECHANICAL SPECIFICATIONS Rotational Torque Mechanical Travel Panel Mounting Torque Shaft Load Force Shaft Pull Force Terminals 3.5 oz - in (2.16 - 3.60 Ncm) Continuous 7 lbs - in (1.13 Nm) maximum 10 lbs - in (1.13 Nm) maximum 10 lbs - in maximum Standard PC style, 3 terminals on 0.100” (2.54mm) grid - in - line perpendicular or parallel to shaft. Solder hook available on 0.200” grid Molding compound used for housing/bushing and shaft has a UL94V - 2 rating 100,000 detented cycles at rated load typical (1 cycle = 720 degrees) ENVIRONMENTAL SPECIFICATIONS Temperature Range - 40°C to + 105°C (Operating temperature) - 55°C to + 120°C (Storage temperature) Per MIL-STD 202, Method 106C Insulation resistance shall be 1 MΩ maximum of a relative humidity 90% @ 25°C Per MIL-STD 202, Method 213, Test Condition G consisting of 1 MIL-STD Humidity Shock Molded Construction PACKAGING Box of 50 pieces Rotational Life ORDERING INFORMATION 110E MODEL 110E 1 A BUSHING 48 SINGLE SHAFT FMS CODED IN 64ths 48 = 0.750” 56 = 0.875” F 204P 2-4 - BIT GREY CODE OPTIONS P 1 = at 9’0 clock 0 = None A = 3/8 (9.53mm) dia x 1/4 (6.35mm) long G = 3/8 (9.53mm) dia x 3/8 (9.53mm) long S: Slotted F: Flatted 204P = 4 cycles/rev 16 detents/rev 206P = 6 cycles/rev 24 detents/rev 209P = 9 cycles/rev 36 detents/rev 416P = 16 electrical positions/rev 16 detents/rev B: PC terminals straight (horizontal mount) C: PC terminals bent back (vertical mount) Type C - 30 P: Type B with mounting bracket D: Type C with mounting bracket S: Solder Hook Hardware not included SAP PART NUMBERING GUIDELINES 1 1 0 E W BUSHING 1 G H SHAFT F P LEADS 2 0 4 P B 2 PACKAGING 5 SPECIAL PEG See the end of this data book for conversion tables Document Number: 57089 Revision: 05-Aug-04 MODEL CODE OPTIONS For technical questions, contact: sfer@vishay.com www.vishay.com 137 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1