116SFZ

Series 116 BFZ-SFZ Vishay Sfernice Precision Rotative Transducers 360° Special Laws: Sine/Cosine FEATURES • • • • • • • Laws: sine and cosine Size 11 Continuous measure on 360° Long life up to 25 106 cycles Conformity from ± 1 % down to ± 0.5 % Bushing or servo mounting Following MIL-R-39023 requirements SIZE MODEL 116 SFZ Z: Sine and cosine 11 116 BFZ RoHS COMPLIANT Rotational motion transducers with trigonometric laws for a full angle measurement: 360° (no dead band). LAW ELECTRICAL SPECIFICATIONS Theoretical Electrical Angle (TEA) = 360° Conformity Peak to Peak Number of Cups Ohmic Values (RT per Quadrant) Ohmic Value Tolerances at 20 °C Output Smoothness Maximum Power Rating at 70 °C Wiper Current Ground Taps Resistance Load on Wiper Resolution Insulation Resistance Dielectric Strength Actual electrical angle (AEA) = TEA A≤±1% or Up to 2 1 kΩ - 5 kΩ - 10 kΩ - on request other values ± 20 % ≤ 0.05 % 0.4 W Recommended: a few µA - 1 mA max. (continuous) On request Minimum 103 x RT Essentially infinite ≥ 1000 MΩ, 500 VDC ≥ 500 VRMS, 50 Hz B ≤ ± 0.5 % MECHANICAL SPECIFICATIONS Mechanical Angle (MA) Mounting Type Shaft Guiding Shaft Housing Termination Wiper 1 cup Starting Torque (N.cm) 2 cups Weight (g) ≤ 0.3 ≤ 0.5 30 ± 2 (1 cup) + 17 ± 2 (2 cups) Servo Ball bearings Stainless steel Plastic moulding Turrets Precious metal multi-finger contact ≤ 0.5 ≤ 0.8 360° continuous Bushing Sleeve bearings www.vishay.com 48 For technical questions, contact: sfer@vishay.com Document Number: 54006 Revision: 22-Mar-07 Series 116 BFZ-SFZ Precision Rotative Transducers 360° Special Laws: Sine/Cosine PERFORMANCE Life (106 Cycles) Temperature Range Climatic Category Speed Rotation (RPM) Sine Vibration on 3 Axes Mechanical Shocks on 3 Axes 600 (servo) 50 g - 11 ms - half sine ≥ 25 (servo) - 55 °C to + 125 °C 55/125/04 150 (bushing) 1.5 mm or 20 g from 10 Hz to 2000 Hz ≥ 15 (bushing) Vishay Sfernice TRIGONOMETRIC FUNCTIONS SINE/COSINE OVER 360° +E θ -E +E 0 -E β 90° COS SIN ∝ a=0 es E = SIN ∝ ec E = COS β LAW Z 0° ≤ Θ ≤ 360° β = ∝ + 90° ec es DIMENSIONS in millimeters, general tolerance ± 0.5 mm 45° 3 4 2 A 6 5 C D G C A 45° 116 SF Z 1.6 ± 0.1 F E SIZE 11 Ø 9.52 × 0.78 116 BF Z 1.6 J R = I MAX. 1 H B N K B H N 1: 2: 3: 4: 5: 6: POWER SUPPLY (+) POWER SUPPLY (-) WIPER (SINE) WIPER (COSINE) GROUND TAP (ON REQUEST) GROUND TAP (ON REQUEST) mm A +0 - 0.013 3.175 B max. 16.6 20 C max. 27.05 27.05 D +0 - 0.013 24.608 E ± 0.1 1.6 F min. 1.5 G max. 24.8 H min. 4.5 3 I max. 17.3 J +0 - 0.02 10.3 K max. 9.6 N max. (1 cup) 18.5 16.5 N max. (2 cups) 35 33 DIMENSIONS DESIGNATION 116 SF Z 116 BF Z ORDERING INFORMATION/DESCRIPTION ROT SERIES 116 MODEL S MOUNTING TYPE S: Servo B: Bushing F CONDUCTOR F: Plastic Z LAW Z: Sine/ cosine 1 NUMBER OF CUPS 2 max. A CONFORMITY A: ± 1 % B: ± 0.5 % 502 OHMIC VALUE First 2 digits are significant numbers 3rd digit indicates number of zeros e1 LEAD FINISH Special characteristics and designs on request SAP PART NUMBERING GUIDELINES RO 116SFZ MODEL 1 GANG NUMBER 1 or 2 Document Number: 54006 Revision: 22-Mar-07 B CONFORMITY A or B 103 OHMIC VALUE 10 kΩ www.vishay.com 49 For technical questions, contact: sfer@vishay.com Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1