12CTQ035-1PBF

VS-12CTQ...SPbF, VS-12CTQ...-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 6 A VS-12CTQ...SPbF VS-12CTQ...-1PbF FEATURES • • • • 175 °C TJ operation Center tap TO-220 package Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Halogen-free according to IEC 61249-2-21 definition Compliant to RoHS directive 2002/95/EC AEC-Q101 qualified Base common cathode 2 Base common cathode 2 • • • 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode • • • D2PAK TO-262 DESCRIPTION The VS-12CTQ... center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) VR 2x6A 35 V to 45 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ CHARACTERISTICS Rectangular waveform Range tp = 5 μs sine 6 Apk, TJ = 125 °C (per leg) Range VALUES 12 35 to 45 690 0.53 - 55 to 175 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-12CTQ035SPbF VS-12CTQ035-1PbF 35 VS-12CTQ040SPbF VS-12CTQ040-1PbF 40 VS-12CTQ045SPbF VS-12CTQ045-1PbF 45 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 μs sine or 3 μs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 160 °C, rectangular waveform 12 690 A 140 8 1.20 mJ A SYMBOL TEST CONDITIONS VALUES 6 A UNITS Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg TJ = 25 °C, IAS = 1.20 A, L = 11.10 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 94131 Revision: 12-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 1 VS-12CTQ...SPbF, VS-12CTQ...-1PbF Series Vishay High Power Products ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 6A Maximum forward voltage drop per leg See fig. 1 VFM (1) 12 A 6A 12 A Maximum reverse leakage current per leg See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR TEST CONDITIONS TJ = 25 °C TJ = 125 °C VR = Rated VR VALUES 0.60 0.73 0.53 0.64 0.8 7.0 0.35 18.23 400 8.0 10 000 mA V mΩ pF nH V/μs V UNITS Schottky Rectifier, 2x6A THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink Approximate weight minimum maximum D2PAK SYMBOL TJ, TStg DC operation See fig. 4 DC operation RthCS Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 175 3.50 1.75 0.50 2 0.07 6 (5) 12 (10) g oz. kgf · cm (lbf · in) °C/W UNITS °C RthJC Mounting torque 12CTQ035S Case style Marking device Case style TO-262 12CTQ040S 12CTQ045S 12CTQ035-1 12CTQ040-1 12CTQ045-1 www.vishay.com 2 For technical questions, contact: diodestech@vishay.com Document Number: 94131 Revision: 12-Mar-10 VS-12CTQ...SPbF, VS-12CTQ...-1PbF Series Schottky Rectifier, 2x6A 100 Vishay High Power Products 100 TJ = 175 °C IF - Instantaneous Forward Current (A) IR - Reverse Current (mA) 10 1 0.1 TJ = 75 °C 0.01 TJ = 50 °C 0.001 TJ = 25 °C 0.0001 TJ = 150 °C TJ = 125 °C TJ = 100 °C 10 TJ = 175 °C TJ = 125 °C TJ = 25 °C 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 5 10 15 20 25 30 35 40 45 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 1000 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) TJ = 25 °C 100 0 10 20 30 40 50 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.1 PDM t1 t2 0.01 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 10 . 100 0.001 0.00001 0.0001 0.001 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94131 Revision: 12-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-12CTQ...SPbF, VS-12CTQ...-1PbF Series Vishay High Power Products 175 Schottky Rectifier, 2x6A 5.0 4.5 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit Allowable Case Temperature (°C) 170 Average Power Loss (W) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 165 DC 160 Square wave (D = 0.50) 80 % rated VR applied 155 See note (1) 150 0 2 4 6 8 10 DC 0 2 4 6 8 10 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94131 Revision: 12-Mar-10 VS-12CTQ...SPbF, VS-12CTQ...-1PbF Series Schottky Rectifier, 2x6A ORDERING INFORMATION TABLE Device code Vishay High Power Products VS1 1 2 3 4 5 6 7 8 - 12 2 C 3 T 4 Q 5 045 6 S 7 TRL PbF 8 9 HPP product suffix Current rating (12 A) Circuit configuration: C = Common cathode T = TO-220 Schottky “Q” series Voltage ratings S = D2PAK -1 = TO-262 None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 035 = 35 V 040 = 40 V 045 = 45 V 9 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com/doc?95014 www.vishay.com/doc?95008 www.vishay.com/doc?95032 Document Number: 94131 Revision: 12-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1