12CWQ10FNTRLPBF

VS-12CWQ10FNPbF Vishay Semiconductors Schottky Rectifier, 2 x 6 A Base common cathode 4 FEATURES • Popular D-PAK outline • Center tap configuration • Small foot print, surface mountable • Low forward voltage drop D-PAK (TO-252AA) 2 Common cathode 1 3 Anode Anode • High frequency operation • Guard ring for enhanced ruggedness and long term reliability • Compliant to RoHS Directive 2002/95/EC PRODUCT SUMMARY Package IF(AV) VR VF at IF IRM TJ max. Diode variation EAS D-PAK (TO-252AA) 2x6A 100 V 0.65 V 4 mA at 125 °C 150 °C Common cathode 6 mJ • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DESCRIPTION The VS-12CWQ10FNPbF surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 6 Apk, TJ = 125 °C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 12 100 330 0.65 - 55 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-12CWQ10FNPbF 100 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 μs sine or 3 μs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 1 A, L = 12 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 135 °C, rectangular waveform 12 330 A 110 6 1 mJ A SYMBOL TEST CONDITIONS VALUES 6 A UNITS Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg Document Number: 94135 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 VS-12CWQ10FNPbF Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER Maximum forward voltage drop per leg See fig. 1 Maximum reverse leakage current per leg See fig. 2 Threshold voltage Forward slope resistance Typical junction capacitance per leg Typical series inductance per leg Note (1) Pulse width < 300 μs, duty cycle < 2 % SYMBOL 6A VFM (1) 12 A 6A 12 A IRM (1) VF(TO) rt CT LS TJ = 25 °C VR = Rated VR TJ = 125 °C TJ = TJ maximum VR = 5 VDC, (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body 4 0.47 20.68 183 5.0 V m pF nH TEST CONDITIONS TJ = 25 °C TJ = 125 °C VALUES 0.80 0.95 0.65 0.78 1 mA V UNITS Schottky Rectifier, 2 x 6 A THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Approximate weight Marking device Note (1) SYMBOL TJ (1), TStg per leg per device RthJC TEST CONDITIONS VALUES - 55 to 150 UNITS °C °C/W g oz. DC operation See fig. 4 3.0 1.5 0.3 0.01 Case style D-PAK (similar to TO-252AA) 12CWQ10FN dP tot 1 ------------ < ------------- thermal runaway condition for a diode on its own heatsink dT J R thJA www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94135 Revision: 14-Jan-11 VS-12CWQ10FNPbF Schottky Rectifier, 2 x 6 A Vishay Semiconductors 1000 100 IF - Instantaneous Forward Current (A) IR - Reverse Current (mA) 10 1 0.1 TJ = 75 °C 0.01 0.001 0.0001 TJ = 50 °C TJ = 25 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C 100 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 10 20 30 40 50 60 70 80 90 100 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 1000 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 20 40 60 80 100 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 PDM t1 t2 0.1 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.1 . 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94135 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 VS-12CWQ10FNPbF Vishay Semiconductors 150 Schottky Rectifier, 2 x 6 A 6 DC 5 4 3 DC 2 1 0 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Allowable Case Temperature (°C) 140 135 130 125 See note (1) 120 Square wave (D = 0.50) 80 % rated VR applied Average Power Loss (W) 145 RMS limit IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94135 Revision: 14-Jan-11 VS-12CWQ10FNPbF Schottky Rectifier, 2 x 6 A Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS1 1 2 3 4 4 5 6 7 8 - 12 2 C 3 W 4 Q 5 10 6 FN 7 TRL PbF 8 9 Vishay Semiconductors product Current rating (12 A) Center tap configurationPackage identifier: W = D-PAK Schottky “Q” series Voltage rating (10 = 100 V) FN = TO-252AA None = Tube (50 pieces) TR = Tape and reel TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 9 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information SPICE model www.vishay.com/doc?95016 www.vishay.com/doc?95059 www.vishay.com/doc?95033 www.vishay.com/doc?95177 Document Number: 94135 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 5 Outline Dimensions Vishay High Power Products D-PAK (TO-252AA) DIMENSIONS in millimeters and inches (5) E b3 Ø2 (3) A 0.010 M C A B L3 (3) 4 B D (5) 1 2 3 L4 Ø1 Seating plane H D1 0.488 (12.40) 0.409 (10.40) A C c2 A Pad layout 0.265 MIN. (6.74) E1 4 0.245 MIN. (6.23) 3 2 1 (2) L5 b b2 2x e Detail “C” c 0.010 M C A B Detail “C” Rotated 90 °CW Scale: 20:1 Lead tip Gauge plane L2 Ø C C L 0.089 MIN. (2.28) A 0.06 MIN. (1.524) 0.093 (2.38) 0.085 (2.18) (L1) H (7) C Seating plane A1 SYMBOL A A1 b b2 b3 c c2 D D1 E E1 Notes (1) (2) (3) (4) (5) MILLIMETERS MIN. 2.18 0.64 0.76 4.95 0.46 0.46 5.97 5.21 6.35 4.32 MAX. 2.39 0.13 0.89 1.14 5.46 0.61 0.89 6.22 6.73 - INCHES MIN. 0.086 0.025 0.030 0.195 0.018 0.018 0.235 0.205 0.250 0.170 MAX. 0.094 0.005 0.035 0.045 0.215 0.024 0.035 0.245 0.265 - NOTES SYMBOL e H L L1 MILLIMETERS MIN. 9.40 1.40 MAX. 10.41 1.78 2.29 BSC INCHES MIN. 0.370 0.055 MAX. 0.410 0.070 0.090 BSC NOTES 2.74 BSC 0.51 BSC 0.89 1.14 0° 0° 25° 1.27 1.02 1.52 10° 15° 35° 0.108 REF. 0.020 BSC 0.035 0.045 0° 0° 25° 0.050 0.040 0.060 10° 15° 35° 2 3 3 L2 L3 L4 5 3 5 3 L5 Ø Ø1 Ø2 Dimensioning and tolerancing as per ASME Y14.5M-1994 Lead dimension uncontrolled in L5 Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body Dimension b1 and c1 applied to base metal only Datum A and B to be determined at datum plane H Outline conforms to JEDEC outline TO-252AA (6) (7) (8) Document Number: 95016 Revision: 04-Nov-08 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1