134D227X9100C8E3

134D Vishay Sprague Wet Tantalum HI TMP® Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation FEATURES Vishay 134D HI TMP® represents a major Pb-free breakthrough in wet tantalum capacitor technology Available for high temperature (+ 200 °C) applications such RoHS* as that seen in the petroleum exploration industry. COMPLIANT Its unique design provides for the highest capacitance per unit volume. The design facilitates a doubling of capacitance when compared with conventional wet tantalum products. The 134D is housed in an all tantalum, hermetically sealed case and is manufactured to withstand high stress and hazardous environments. • Terminations: standard tin/lead (SnPb) • 100 % Tin (RoHS compliant) available PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (to + 200 °C with voltage derating) Capacitance Tolerance: At 120 Hz, + 25 °C; ± 20 % standard; ± 10 % DC Leakage Current (DCL Max.): At + 25 °C and above: Leakage current shall not exceed the values listed in the Standard Ratings Tables. Life Test: Capacitors are capable of withstanding a 500 h life test at a temperature of + 200 °C at the applicable derated DC working voltage. ORDERING INFORMATION 134D TYPE 227 CAPACITANCE X0 CAPACITANCE TOLERANCE X0 = ± 20 % X9 = ± 10 % 100 DC VOLTAGE RATING AT + 85 °C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). K CASE CODE See Ratings and Case Codes Table. 6 STYLE NUMBER E3 ROHS COMPLIANT E3 = 100 % tin termination (RoHS compliant design) Blank = SnPb termination (standard design) This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. High Temperature 8 = No outer insulating sleeve 6 = High temperature film insulation (above + 125 °C) Note Packaging: The use of formed plastic trays for packaging this type of axial lead component is standard. Tape and reel is not recommended due to the unit weight. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 40072 Revision: 25-Aug-08 For technical questions, contact: wettants@vishay.com www.vishay.com 87 134D Vishay Sprague Wet Tantalum HI TMP® Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation DIMENSIONS in inches [millimeters] E L1 E D 0.0253 ± 0.002 [0.64 ± 0.05] DIA. (NO. 22 AWG TINNED NICKEL LEADS) SOLDERABLE AND WELDABLE L2 WELD TANTALUM CASE CODE TYPE 134D C F T K CLR 79/81 EQUIV. T1 T2 T3 T4 D 0.188 ± 0.016 [4.78 ± 0.41] 0.281 ± 0.016 [7.14 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] L1 0.453 + 0.031 - 0.016 [11.51 + 0.79 - 0.41] 0.641 + 0.031 - 0.016 [16.28 + 0.79 - 0.41] 0.766 + 0.031 - 0.016 [19.46 + 0.79 - 0.41] 1.062 + 0.031 - 0.016 [26.97 + 0.79 - 0.41] L2 (Max.) 0.734 [18.64] 0.922 [23.42] 1.047 [26.59] 1.343 [34.11] E 1.500 ± 0.250 [38.10 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] WEIGHT (g) (Max.) 2.6 6.2 11.6 17.7 STANDARD RATINGS CAPACITANCE CASE AT 25 °C CODE AND 120 Hz MAX. 120 Hz ESR Ω MAX. DCL µA 85 °C AND 125 °C MAXIMUM IMP, Z AT - 25 °C Ω ΔCAP. AT - 25 °C IMP, Z AT - 55 °C Ω TYPICAL ΔCAP. AT - 55 °C % ΔCAP. + 85 °C % ΔCAP. + 125 °C % AC RIPPLE (1) 85 °C 40 kHz mA rms 1400 2300 2650 2900 1250 2050 2450 2700 1100 1900 2300 2550 950 1500 1800 2200 750 1450 1450 1700 1900 25 °C 68 220 470 680 47 150 390 560 33 110 330 470 15 68 150 220 10 47 50 100 150 C F T K C F T K C F T K C F T K C F F T K 1.50 0.90 0.75 0.70 2.00 1.10 0.90 0.80 2.50 1.30 1.00 0.90 3.50 2.10 1.60 1.20 5.50 2.30 2.30 1.80 1.60 50 VDC AT 85 °C ... 30 VDC AT 125 °C ... 30 VDC AT 200 °C 1 5 22 -6% 25 - 11 % 2 10 9 - 15 % 10 - 25 % 3 25 6 - 24 % 8 - 50 % 5 40 4 - 22 % 5 - 40 % 60 VDC AT 85 °C ... 40 VDC AT 125 °C ... 36 VDC AT 200 °C 1 5 34 -8% 40 - 20 % 2 10 13 - 11 % 15 - 25 % 3 25 7 - 27 % 10 - 50 % 5 40 5 - 21 % 6 - 40 % 75 VDC AT 85 °C ... 50 VDC AT 125 °C ... 45 VDC AT 200 °C 1 5 45 - 3.5 % 50 -6% 2 10 16 -8% 20 - 18 % 3 30 8 - 30 % 12 - 50 % 5 50 6 - 20 % 7 - 40 % 100 WVDC AT 85 °C ... 65 WVDC AT 125 °C ... 60 WVDC AT 200 °C 1 5 95 - 2.5 % 100 -4% 2 10 25 -6% 30 - 14 % 3 25 14 - 12 % 18 - 30 % 5 50 13 - 44 % 16 - 55 % 125 VDC AT 85 °C ... 85 VDC AT 125 °C ... 75 VDC AT 200 °C 1 5 145 - 2.5 % 150 -4% 2 10 35 -5% 40 - 12 % 3 10 35 -5% 40 - 12 % 3 25 24 - 20 % 30 - 35 % 5 50 13 - 10 % 16 - 28 % 12 % 13 % 10 % 12 % 8% 10 % 10 % 12 % 8% 8% 10 % 10 % 8% 8% 8% 8% 8% 7% 7% 8% 6% 55 % 50 % 25 % 40 % 12 % 30 % 25 % 40 % 25 % 30 % 25 % 40 % 25 % 25 % 22 % 15 % 20 % 20 % 20 % 20 % 12 % Note (1) For insulated parts, add 0.015 inches [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body. www.vishay.com 88 For technical questions, contact: wettants@vishay.com Document Number: 40072 Revision: 25-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1