1419

1419 Vishay Foil Resistors Bulk Metal® Foil Technology 10 Pin Transistor Outline Hermetic Resistor Network The ten pin TO-5 package, with a 0.230" pin circle is the most accommodating of the TO-5 series of networks. It has the largest R capacity of the smaller TO series. This network can contain up to 12 V5X5 resistor chips. Review data sheet “7 Technical Reasons to Specify Bulk Metal® Foil Resistor Networks.” Product may not be to scale ORDERING INFORMATION - 1419 PARTS Networks are built to your requirements. Send your schematic and electrical requirements to the Applications Engineering Department. (See data sheet “Network Worksheet.”) A unique part number will be assigned which defines all aspects of your network. THROUGH HOLE FIGURE 1 - STANDARD DIMENSIONS in inches (millimeters) 0.305 –0.335 (7.75 –8.51) 0.200 MAXIMUM (5.08) (VIEWED FROM BOTTOM) 0.230 TYPICAL (5.84) 0.500 (12.7) MINIMUM 3 4 5 6 VISHAY MODEL NUMBER 1419 CHIP CAPACITY V15X5 - 3 chips V5X5 - 12 chips MAXIMUM POWER RATING (WATTS) @ +70°C 0.4 Watt NOTE: 7 10 LEADS 0.016 –0.019 (0.41 –0.48) DIAMETER 0.350 –0.370 (8.89 –9.39) 2 1 1. These networks utilize Vishay Bulk Metal® Foil resistor chips V5X5 and V15X5 or VTF15X5 Thin Film chips. 2. The V5X5 and V15X5 chips have maximum resistance values of 10K and 33K respectively in Bulk Metal® Foil and 500K in VTF15X5 Thin Film chips. 3. The V5X5 and V15X5 chip(s) can be intermixed in a package. 8 10 9 36˚ EQUALLY SPACED 0.028 –0.034 (0.71 –0.86) 0.030 –0.037 (0.76 –0.93) FIGURE 2 - SAMPLE CIRCUIT DESIGNS AND CHIP LAYOUTS NOTE: Usable area is represented by dotted lines— a rectangle 0.150 Inches x 0.200 Inches. Illustrations not to scale. Chips shown undersize for clarity. Drawing view is from the top looking down into the package. 5 6 3 R1 7 R2 R3 4 SPECIAL ARRANGEMENT ACCOMMODATED BY REMOVING 2 PINS INTERNALLY 4 3 2 1 5 2 R1 R2 R3 R4 6 4 3 OUTPUT 1/2 R4 R5 1/2 R6 1/2 R4 1/2 R2 R3 1/2 R2 R1 R7 1 2 R7 R5 R3 R1 9 10 8 R4 9 2 3 1 10 1 5 6 7 8 7 1/2 R8 1/2 R6 1/2 R8 8 9 R8 R6 R4 R2 SHIFT DOWN WEIGHTED LADDER, 1 DECADE 10 4 2R1 R2 2R1 1/4 R4 1/2 R3 1/2 R3 1/2 R3 10 7.5R 1 8 1/2 1/4 R4 R5 1/4 R4 1/4 R4 R 9 2R 4R 8R 5 3 8 2 9 7 R1=R, R2=2R, R3=4R, R4=8R, R5=7.5R 6 7 R3 = R5 = R7 = "R" R1 = R2 = R4 = R6 = R8 = " 2R" Use as an accuracy extender: Connect Pin No. 1 to output of ladder to be extended (Pin No. 10 open) Use as a 4 Bit, self-contained ladder: Ground Pin No. 10 (Pin No. 1 open) SALES • ISRAEL: foilsales.israel@vishay.com • FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com • AMERICAS: foilsales.usa@vishay.com • ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com For technical questions in the Americas, contact foilsupport1@vishay.com Document Number: 63041 For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com Revision 08-Mar-05 www.vishay.com 123 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1