15ETH06PBF

15ETH06PbF/15ETH06FPPbF Vishay High Power Products Hyperfast Rectifier, 15 A FRED PtTM FEATURES 15ETH06PbF 15ETH06FPPbF • Hyperfast recovery time • Low forward voltage drop • Low leakage current • 175 °C operating junction temperature • Single die center tap module Pb-free Available RoHS* COMPLIANT Base cathode 2 • Fully isolated package (VINS = 2500 VRMS) • UL E78996 approved • Lead (Pb)-free • Designed and qualified for industrial level 1 Cathode 3 Anode 1 Cathode 3 Anode DESCRIPTION/APPLICATIONS State of the art hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, hyperfast recovery time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. TO-220AC TO-220 FULL-PAK PRODUCT SUMMARY trr (typical) IF(AV) VR 22 ns 15 A 600 V ABSOLUTE MAXIMUM RATINGS PARAMETER Peak repetitive reverse voltage Average rectified forward current SYMBOL VRRM IF(AV) TC = 140 °C TC = 80 °C (FULL-PAK) TJ = 25 °C TJ = 25 °C (FULL-PAK) TEST CONDITIONS VALUES 600 15 120 180 30 - 65 to 175 °C A UNITS V Non-repetitive peak surge current Peak repetitive forward current Operating junction and storage temperatures IFSM IFM TJ, TStg ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF IR = 100 µA IF = 1 5 A IF = 15 A, TJ = 150 °C VR = VR rated TJ = 150 °C, VR = VR rated VR = 600 V Measured lead to lead 5 mm from package body TEST CONDITIONS MIN. 600 TYP. 1.8 1.3 0.2 30 20 8.0 MAX. 2.2 1.6 50 500 µA pF nH V UNITS Reverse leakage current Junction capacitance Series inductance IR CT LS * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94002 Revision: 28-May-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 15ETH06PbF/15ETH06FPPbF Vishay High Power Products Hyperfast Rectifier, 15 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS IF = 1 A, dIF/dt = 100 A/µs, VR = 30 V Reverse recovery time trr IF = 15 A, dIF/dt = 100 A/µs, VR = 30 V TJ = 25 °C TJ = 125 °C Peak recovery current IRRM Qrr trr IRRM Qrr TJ = 125 °C TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C IF = 1 5 A dIF/dt = 800 A/µs VR = 390 V IF = 1 5 A dIF/dt = 200 A/µs VR = 390 V MIN. TYP. 22 28 29 75 3.5 7 57 300 51 20 580 MAX. 30 35 A ns UNITS Reverse recovery charge Reverse recovery time Peak recovery current Reverse recovery charge nC ns A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per leg (FULL-PAK) per leg SYMBOL TJ, TStg RthJC RthJA RthCS Typical socket mount Mounting surface, flat, smooth and greased TEST CONDITIONS MIN. - 65 6.0 (5.0) Case style TO-220AC Case style TO-220 FULL-PAK TYP. 1.0 3.0 0.5 2.0 0.07 MAX. 175 1.3 3.5 70 12 (10) 15ETH06 15ETH06FP g oz. kgf · cm (lbf · in) °C/W UNITS °C Thermal resistance, junction to ambient per leg Thermal resistance, case to heatsink Weight Mounting torque Marking device www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94002 Revision: 28-May-08 15ETH06PbF/15ETH06FPPbF Hyperfast Rectifier, 15 A FRED PtTM 100 1000 TJ = 175 °C Vishay High Power Products IF - Instantaneous Forward Current (A) IR - Reverse Current (µA) 100 TJ = 150 °C 10 1 0.1 0.01 0.001 0 TJ = 25 °C TJ = 125 °C TJ = 100 °C 10 TJ = 175 °C TJ = 150 °C TJ = 25 °C 1 0.5 1.0 1.5 2.0 2.5 3.0 0 100 200 300 400 500 600 VF - Forward Voltage Drop (V) Fig. 1 - Typical Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 1000 CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 100 200 300 400 500 600 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM t1 t2 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.01 0.1 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94002 Revision: 28-May-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 15ETH06PbF/15ETH06FPPbF Vishay High Power Products 10 Hyperfast Rectifier, 15 A FRED PtTM ZthJC - Thermal Impedance (°C/W) 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 0.01 0.1 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 1 10 . 100 0.0001 t1 - Rectangular Pulse Duration (s) Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK) 180 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) 170 160 150 140 130 120 110 0 5 10 15 20 25 Square wave (D = 0.50) 80 % rated Vr applied DC 160 140 120 100 80 60 40 20 0 0 4 8 12 16 20 24 See note (1) Square wave (D = 0.50) 80 % rated Vr applied DC See note (1) IF(AV) - Average Forward Current (A) Fig. 6 - Maximum Allowable Case Temperature vs. Average Forward Current 35 IF(AV) - Average Forward Current (A) Fig. 7 - Maximum Allowable Case Temperature vs. Average Forward Current (FULL-PAK) Average Power Loss (W) 30 25 RMS limit 20 15 10 5 0 0 5 10 15 20 25 DC D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 IF(AV) - Average Forward Current (A) Fig. 8 - Forward Power Loss Characteristics (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 8); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94002 Revision: 28-May-08 15ETH06PbF/15ETH06FPPbF Hyperfast Rectifier, 15 A FRED PtTM 100 IF = 30 A IF = 15 A 80 800 IF = 30 A IF = 15 A 1000 VR = 390 V TJ = 125 °C TJ = 25 °C Vishay High Power Products 40 Qrr (nC) VR = 390 V TJ = 125 °C TJ = 25 °C 1000 trr (ns) 60 600 400 20 200 0 100 0 100 1000 dIF/dt (A/µs) Fig. 9 - Typical Reverse Recovery Time vs. dIF/dt dIF/dt (A/µs) Fig. 10 - Typical Stored Charge vs. dIF/dt VR = 200 V 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D G IRFP250 S Fig. 11 - Reverse Recovery Parameter Test Circuit (3) IF 0 trr ta tb Qrr (2) (4) IRRM 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under cur ve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 12 - Reverse Recovery Waveform and Definitions Document Number: 94002 Revision: 28-May-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 15ETH06PbF/15ETH06FPPbF Vishay High Power Products ORDERING INFORMATION TABLE Hyperfast Rectifier, 15 A FRED PtTM Device code 15 1 E 2 T 3 H 4 06 5 FP 6 PbF 7 1 2 3 4 5 6 7 - Current rating (15 = 15 A) E = Single diode T = TO-220, D2PAK H = Hyperfast recovery Voltage rating (06 = 600 V) None = TO-220AC FP = TO-220 FULL-PAK None = Standard production PbF = Lead (Pb)-free Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95039 http://www.vishay.com/doc?95045 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 94002 Revision: 28-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1