15ETL06

15ETL06/15ETL06FP Vishay High Power Products Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM FEATURES 15ETL06 15ETL06FP Base cathode 2 • • • • • • • Benchmark ultralow forward voltage drop Hyperfast recovery time Low leakage current 175 °C operating junction temperature Fully isolated package (VINS = 2500 VRMS) UL E78996 approved Designed and qualified for industrial level DESCRIPTION 1 Cathode 3 Anode 1 Cathode 3 Anode TO-220AC TO-220 FULL-PAK PRODUCT SUMMARY VF (typical) IF(AV) VR 0.99 V 15 A 600 V State of the art, ultralow VF, soft-switching hyperfast rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimized conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. APPLICATIONS AC-DC SMPS 70 W to 400 W e.g. laptop and printer AC adaptors, desktop PC, TV and monitor, games units and DVD AC-DC power supplies. ABSOLUTE MAXIMUM RATINGS PARAMETER Peak repetitive reverse voltage Average rectified forward current Non-repetitive peak surge current Peak repetitive forward current Operating junction and storage temperatures SYMBOL VRRM IF(AV) IFSM IFM TJ, TStg TC = 154 °C TC = 120 °C (FULL-PAK) TJ = 25 °C TEST CONDITIONS VALUES 600 15 250 30 - 65 to 175 °C A UNITS V ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF IR = 100 µA IF = 1 5 A IF = 15 A, TJ = 150 °C VR = VR rated TJ = 150 °C, VR = VR rated VR = 600 V Measured lead to lead 5 mm from package body TEST CONDITIONS MIN. 600 TYP. 0.99 0.85 0.1 15 20 8.0 MAX. 1.05 0.92 10 120 µA pF nH V UNITS Reverse leakage current Junction capacitance Series inductance IR CT LS Document Number: 93007 Revision: 20-Jun-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 15ETL06/15ETL06FP Vishay High Power Products Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS IF = 1 A, dIF/dt = 100 A/µs, VR = 30 V Reverse recovery time trr IF = 15 A, dIF/dt = 100 A/µs, VR = 30 V TJ = 25 °C TJ = 125 °C Peak recovery current IRRM Qrr TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C IF = 1 5 A dIF/dt = 200 A/µs VR = 390 V MIN. TYP. 60 190 220 320 19 26 2.2 4.3 MAX. 120 270 A ns UNITS Reverse recovery charge µC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per leg (FULL-PAK) per leg SYMBOL TJ, TStg RthJC RthJA RthCS Typical socket mount Mounting surface, flat, smooth and greased TEST CONDITIONS MIN. - 65 6.0 (5.0) Case style TO-220AC Case style TO-220AC FULL-PAK TYP. 1.0 3.0 0.5 2.0 0.07 MAX. 175 1.3 3.5 70 12 (10) 15ETL06 15ETL06FP g oz. kgf · cm (lbf · in) °C/W UNITS °C Thermal resistance, junction to ambient per leg Thermal resistance, case to heatsink Weight Mounting torque Marking device www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93007 Revision: 20-Jun-08 15ETL06/15ETL06FP Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM 100 100 TJ = 175 °C Vishay High Power Products IF - Instantaneous Forward Current (A) IR - Reverse Current (µA) 10 TJ = 150 °C TJ = 125 °C 10 TJ = 175 °C TJ = 150 °C TJ = 25 °C 1 TJ = 100 °C TJ = 75 °C 0.1 TJ = 50 °C TJ = 25 °C 0.01 1 0.4 0.001 0.6 0.8 1.0 1.2 1.4 1.6 0 100 200 300 400 500 600 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 100 CT - Junction Capacitance (pF) TJ = 25 °C 10 0 100 200 300 400 500 600 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.01 0.1 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93007 Revision: 20-Jun-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 15ETL06/15ETL06FP Vishay High Power Products 10 Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM ZthJC - Thermal Impedance (°C/W) 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 0.01 0.1 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 1 10 . 100 0.0001 t1 - Rectangular Pulse Duration (s) Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK) 180 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) 170 DC 160 Square wave (D = 0.50) Rated VR applied 160 DC 140 150 120 Square wave (D = 0.50) 80 % rated VR applied 140 See note (1) 130 0 5 10 15 20 25 100 See note (1) 80 0 5 10 15 20 25 IF(AV) - Average Forward Current (A) Fig. 6 - Maximum Allowable Case Temperature vs. Average Forward Current 25 RMS limit IF(AV) - Average Forward Current (A) Fig. 7 - Maximum Allowable Case Temperature vs. Average Forward Current (FULL-PAK) Average Power Loss (W) 20 15 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 10 5 DC 0 0 5 10 15 20 25 IF(AV) - Average Forward Current (A) Fig. 8 - Forward Power Loss Characteristics Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 8); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93007 Revision: 20-Jun-08 15ETL06/15ETL06FP Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM 500 IF = 30 A IF = 15 A 400 9000 8000 7000 6000 IF = 30 A IF = 15 A Vishay High Power Products Qrr (nC) trr (ns) 300 5000 4000 3000 200 100 VR = 390 V TJ = 125 °C TJ = 25 °C 1000 2000 1000 0 100 VR = 390 V TJ = 125 °C TJ = 25 °C 1000 0 100 dIF/dt (A/µs) Fig. 9 - Typical Reverse Recovery Time vs. dIF/dt dIF/dt (A/µs) Fig. 10 - Typical Stored Charge vs. dIF/dt VR = 200 V 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D G IRFP250 S Fig. 11 - Reverse Recovery Parameter Test Circuit (3) IF 0 trr ta tb Qrr (2) (4) IRRM 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under cur ve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 12 - Reverse Recovery Waveform and Definitions Document Number: 93007 Revision: 20-Jun-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 15ETL06/15ETL06FP Vishay High Power Products ORDERING INFORMATION TABLE Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED PtTM Device code 15 1 E 2 T 3 L 4 06 5 FP 6 7 1 2 3 4 5 6 7 - Current rating (15 = 15 A) E = Single diode T = TO-220, D2PAK L = Ultralow VF hyperfast recovery Voltage rating (06 = 600 V) None = TO-220AC FP = TO-220 FULL-PAK None = Standard production PbF = Lead (Pb)-free Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions Part marking information SPICE model http://www.vishay.com/doc?95039 http://www.vishay.com/doc?95045 http://www.vishay.com/doc?95270 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 93007 Revision: 20-Jun-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1