15ETL06PBF_11

VS-15ETL06PbF, VS-15ETL06FPPbF Vishay Semiconductors Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED Pt® FEATURES • Hyperfast recovery time • Benchmark ultralow forward voltage drop • 175 °C operating junction temperature TO-220AC Base cathode 2 TO-220 FULL-PAK • Low leakage current • Fully isolated package (VINS = 2500 VRMS) • UL E78996 pending • Designed and qualified for industrial level • Compliant to RoHS Directive 2002/95/EC 1 Cathode 3 Anode 1 Cathode 3 Anode DESCRIPTION State of the art, ultralow VF, soft-switching hyperfast rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimized conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. VS-15ETL06PbF VS-15ETL06FPPbF PRODUCT SUMMARY Package IF(AV) VR VF at IF trr typ. TJ max. Diode variation TO-220AC, TO-220FP 15 A 600 V 1.05 V 60 ns 175 °C Single die APPLICATIONS AC/DC SMPS 70 W to 400 W e.g. laptop and printer AC adaptors, desktop PC, TV and monitor, games units and DVD AC/DC power supplies. ABSOLUTE MAXIMUM RATINGS PARAMETER Peak repetitive reverse voltage Average rectified forward current Non-repetitive peak surge current Peak repetitive forward current Operating junction and storage temperatures SYMBOL VRRM IF(AV) IFSM IFM TJ, TStg TC = 154 °C TC = 120 °C (FULL-PAK) TJ = 25 °C TEST CONDITIONS VALUES 600 15 250 30 - 65 to 175 °C A UNITS V ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF IR CT LS IR = 100 μA IF = 15 A IF = 15 A, TJ = 150 °C VR = VR rated TJ = 150 °C, VR = VR rated VR = 600 V Measured lead to lead 5 mm from package body TEST CONDITIONS MIN. 600 TYP. 0.99 0.85 0.1 15 20 8.0 MAX. 1.05 0.92 10 120 μA pF nH V UNITS Reverse leakage current Junction capacitance Series inductance Document Number: 94004 Revision: 31-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-15ETL06PbF, VS-15ETL06FPPbF Vishay Semiconductors Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED Pt® DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS IF = 1 A, dIF/dt = 100 A/μs, VR = 30 V Reverse recovery time trr IF = 15 A, dIF/dt = 100 A/μs, VR = 30 V TJ = 25 °C TJ = 125 °C Peak recovery current IRRM Qrr TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C I F = 15 A dIF/dt = 200 A/μs VR = 390 V MIN. TYP. 60 190 220 320 19 26 2.2 4.3 MAX. 120 270 A ns UNITS Reverse recovery charge μC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case Thermal resistance, junction to ambient per leg Thermal resistance, case to heatsink Weight Mounting torque Marking device Case style TO-220AC Case style TO-220AC FULL-PAK SYMBOL TJ, TStg RthJC RthJA RthCS Typical socket mount Mounting surface, flat, smooth and greased TEST CONDITIONS MIN. - 65 6.0 (5.0) TYP. 1.0 3.0 0.5 2.0 0.07 MAX. 175 1.3 3.5 70 12 (10) 15ETL06 15ETL06FP g oz. kgf · cm (lbf · in) °C/W UNITS °C (FULL-PAK) 100 100 TJ = 175 °C IF - Instantaneous Forward Current (A) IR - Reverse Current (µA) 10 TJ = 150 °C TJ = 125 °C 10 TJ = 175 °C TJ = 150 °C TJ = 25 °C 1 TJ = 100 °C TJ = 75 °C 0.1 TJ = 50 °C TJ = 25 °C 0.01 1 0.4 0.001 0.6 0.8 1.0 1.2 1.4 1.6 0 100 200 300 400 500 600 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage For technical questions within your region, please contact one of the following: Document Number: 94004 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 31-Mar-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 2 VS-15ETL06PbF, VS-15ETL06FPPbF Ultralow VF Hyperfast Rectifier for Vishay Semiconductors Discontinuous Mode PFC, 15 A FRED Pt® 100 CT - Junction Capacitance (pF) TJ = 25 °C 10 0 100 200 300 400 500 600 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.01 0.1 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 0.01 0.1 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 1 10 . 100 0.0001 t1 - Rectangular Pulse Duration (s) Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK) Document Number: 94004 Revision: 31-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-15ETL06PbF, VS-15ETL06FPPbF Vishay Semiconductors 180 Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED Pt® 25 RMS limit Allowable Case Temperature (°C) 170 DC 160 Square wave (D = 0.50) Rated VR applied Average Power Loss (W) 20 15 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 150 10 140 See note (1) 130 0 5 10 15 20 25 5 DC 0 0 5 10 15 20 25 IF(AV) - Average Forward Current (A) Fig. 6 - Maximum Allowable Case Temperature vs. Average Forward Current 180 500 IF(AV) - Average Forward Current (A) Fig. 8 - Forward Power Loss Characteristics Allowable Case Temperature (°C) IF = 30 A IF = 15 A 160 DC 400 trr (ns) Square wave (D = 0.50) 80 % rated VR applied 140 300 120 200 100 See note (1) 80 0 5 10 15 20 25 100 VR = 390 V TJ = 125 °C TJ = 25 °C 1000 0 100 IF(AV) - Average Forward Current (A) Fig. 7 - Maximum Allowable Case Temperature vs. Average Forward Current (FULL-PAK) 9000 8000 7000 6000 IF = 30 A IF = 15 A dIF/dt (A/µs) Fig. 9 - Typical Reverse Recovery Time vs. dIF/dt Qrr (nC) 5000 4000 3000 2000 1000 0 100 VR = 390 V TJ = 125 °C TJ = 25 °C 1000 dIF/dt (A/µs) Fig. 10 - Typical Stored Charge vs. dIF/dt (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 8); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 94004 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 31-Mar-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-15ETL06PbF, VS-15ETL06FPPbF Ultralow VF Hyperfast Rectifier for Vishay Semiconductors Discontinuous Mode PFC, 15 A FRED Pt® VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D G IRFP250 S Fig. 11 - Reverse Recovery Parameter Test Circuit (3) IF 0 trr ta tb Qrr (2) (4) IRRM 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 12 - Reverse Recovery Waveform and Definitions Document Number: 94004 Revision: 31-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-15ETL06PbF, VS-15ETL06FPPbF Vishay Semiconductors Ultralow VF Hyperfast Rectifier for Discontinuous Mode PFC, 15 A FRED Pt® ORDERING INFORMATION TABLE Device code VS1 1 2 3 4 5 6 7 8 - 15 2 E 3 T 4 L 5 06 6 FP 7 PbF 8 Vishay Semiconductors product Current rating (15 = 15 A) E = Single diode T = TO-220, D2PAK L = Ultralow VF hyperfast recovery Voltage rating (06 = 600 V) None = TO-220AC FP = TO-220 FULL-PAK PbF = Lead (Pb)-free Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions TO-220AC TO-220AC FULL-PAK TO-220AC TO-220AC FULL-PAK www.vishay.com/doc?95221 www.vishay.com/doc?95005 www.vishay.com/doc?95224 www.vishay.com/doc?95009 www.vishay.com/doc?95270 Part marking information SPICE model For technical questions within your region, please contact one of the following: Document Number: 94004 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 31-Mar-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 6 Outline Dimensions www.vishay.com DIMENSIONS in millimeters 10.6 10.4 Hole Ø 3.4 3.1 2.8 2.6 Vishay Semiconductors 3.7 3.2 7.31 6.91 16.0 15.8 16.4 15.4 10° 3.3 3.1 13.56 13.05 2.54 TYP. 0.9 0.7 2.54 TYP. 0.61 0.38 2.85 2.65 Lead assignments Diodes 1 + 2 - Cathode 3 - Anode 1.4 1.3 1.15 TYP. 1.05 R 0.7 (2 places) R 0.5 4.8 4.6 5° ± 0.5° 5° ± 0.5° Conforms to JEDEC outline TO-220 FULL-PAK Revision: 20-Jul-11 Document Number: 95005 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors TO-220AC DIMENSIONS in millimeters and inches B Seating plane ØP 0.014 M B A M (6) H1 (7) Detail B D1 1 L3 L4 L 23 C E1 (6) Lead assignments Diodes 1 + 2 - Cathode 3 - Anode c e1 0.015 M B A M A2 A Conforms to JEDEC outline TO-220AC θ A A A1 H1 D2 (6) 2 x b2 Detail B 2xb E Thermal pad C C 1 2 D 3 D L1 (6) E E2 (7) Q A (6) D Lead tip View A - A SYMBOL A A1 A2 b b1 b2 b3 c c1 D D1 D2 E MILLIMETERS MIN. 4.25 1.14 2.56 0.69 0.38 1.20 1.14 0.36 0.36 14.85 8.38 11.68 10.11 MAX. 4.65 1.40 2.92 1.01 0.97 1.73 1.73 0.61 0.56 15.25 9.02 12.88 10.51 INCHES MIN. 0.167 0.045 0.101 0.027 0.015 0.047 0.045 0.014 0.014 0.585 0.330 0.460 0.398 MAX. 0.183 0.055 0.115 0.040 0.038 0.068 0.068 0.024 0.022 0.600 0.355 0.507 0.414 NOTES SYMBOL E1 E2 e e1 MILLIMETERS MIN. 6.86 2.41 4.88 6.09 13.52 3.32 1.78 0.76 3.54 2.60 MAX. 8.89 0.76 2.67 5.28 6.48 14.02 3.82 2.13 1.27 3.73 3.00 INCHES MIN. 0.270 0.095 0.192 0.240 0.532 0.131 0.070 0.030 0.139 0.102 MAX. 0.350 0.030 0.105 0.208 0.255 0.552 0.150 0.084 0.050 0.147 0.118 NOTES 6 7 4 H1 L 6, 7 4 L1 L3 2 4 3 L4 ØP Q  2 6 3, 6 90° to 93° 90° to 93° Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3 and c1 apply to base metal only (5) Controlling dimension: inches (6) Thermal pad contour optional within dimensions E, H1, D2 and E1 (7) Dimension E2 x H1 define a zone where stamping and singulation irregularities are allowed (8) Outline conforms to JEDEC TO-220, D2 (minimum) where dimensions are derived from the actual package outline Document Number: 95221 Revision: 07-Mar-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1