15TQ060SPBF_10

VS-15TQ060SPbF Vishay High Power Products Schottky Rectifier, 15 A FEATURES Base cathode 2 • • • • D2PAK 1 N/C 3 Anode • • • • 150 °C TJ operation Very low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Guard ring for enhanced ruggedness and long term reliability Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Halogen-free according to IEC 61249-2-21 definition Compliant to RoHS directive 2002/95/EC PRODUCT SUMMARY IF(AV) VR 15 A 60 V • AEC-Q101 qualified DESCRIPTION The VS-15TQ060SPbF Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 15 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform VALUES 15 60 1000 0.56 - 55 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-15TQ060SPbF 60 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 Maximum peak one cycle non-repetitive surge current See fig. 7 Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) TEST CONDITIONS 50 % duty cycle at TC = 104 °C, rectangular waveform 5 μs sine or 3 μs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied VALUES 15 1000 A 260 6 1.50 mJ A UNITS A TJ = 25 °C, IAS = 1.5 A, L = 11.5 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 94143 Revision: 12-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 1 VS-15TQ060SPbF Vishay High Power Products Schottky Rectifier, 15 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 15 A Maximum forward voltage drop See fig. 1 VFM (1) 30 A 15 A 30 A Maximum reverse leakage current See fig. 2 Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C TJ = 125 °C VR = Rated VR VALUES 0.62 0.82 0.56 0.71 0.80 45 720 8.0 10 000 mA pF nH V/μs V UNITS VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style D2PAK SYMBOL TJ, TStg RthJC RthCS DC operation See fig. 4 Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 150 3.25 °C/W 0.50 2 0.07 6 (5) 12 (10) g oz. kgf · cm (lbf · in) 15TQ060S UNITS °C Mounting torque Marking device www.vishay.com 2 For technical questions, contact: diodestech@vishay.com Document Number: 94143 Revision: 12-Mar-10 VS-15TQ060SPbF Schottky Rectifier, 15 A Vishay High Power Products 1000 1000 IF - Instantaneous Forward Current (A) IR - Reverse Current (mA) 100 TJ = 150 °C TJ = 125 °C TJ = 25 °C 100 10 1 TJ = 75 °C 0.1 0.01 0.001 TJ = 50 °C TJ = 25 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C 10 1 0 0.4 0.8 1.2 1.6 2.0 0 10 20 30 40 50 60 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 1000 CT - Junction Capacitance (pF) TJ = 25 °C 100 0 10 20 30 40 50 60 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) PDM t1 t2 0.1 0.01 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 10 . 100 0.001 0.00001 0.0001 0.001 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94143 Revision: 12-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-15TQ060SPbF Vishay High Power Products Schottky Rectifier, 15 A 150 14 Allowable Case Temperature (°C) Average Power Loss (W) 140 130 120 110 100 90 See note (1) 80 0 5 10 15 20 25 Square wave (D = 0.50) 80 % rated VR applied DC 12 10 8 6 4 2 0 0 2 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit DC 4 6 8 10 12 14 16 18 20 22 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94143 Revision: 12-Mar-10 VS-15TQ060SPbF Schottky Rectifier, 15 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS1 1 2 3 4 5 6 7 - 15 2 T 3 Q 4 060 5 S 6 TRL PbF 7 8 HPP product suffix Current rating (15 A) Circuit configuration: T = TO-220 Schottky “Q” series Voltage rating (060 = 60 V) S = D2PAK None = Tube (50 pieces) TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 8 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com/doc?95014 www.vishay.com/doc?95008 www.vishay.com/doc?95032 Document Number: 94143 Revision: 12-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1