16F10

16F(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 16 A FEATURES • High surge current capability • Stud cathode and stud anode version • Wide current range • Types up to 1200 V VRRM • RoHS compliant • Designed and qualified for industrial and consumer level RoHS COMPLIANT TYPICAL APPLICATIONS DO-203AA (DO-4) • Battery charges • Converters PRODUCT SUMMARY IF(AV) 16 A • Power supplies • Machine tool controls MAJOR RATINGS AND CHARACTERISTICS PARAMETER IF(AV) IF(RMS) IFSM I2 t VRRM TJ 50 Hz 60 Hz 50 Hz 60 Hz Range TEST CONDITIONS VALUES 16 TC 140 25 350 370 612 560 100 to 1200 - 65 to 175 UNITS A °C A A A2 s V °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 10 20 40 16F(R) 60 80 100 120 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 100 200 400 600 800 1000 1200 VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 150 275 500 725 950 1200 1400 VR(BR), MINIMUM AVALANCHE VOLTAGE V (1) 500 750 950 1150 1350 12 IRRM MAXIMUM AT TJ = 175 °C mA Note (1) Avalanche version only available from V RRM 400 V to 1200 V Document Number: 93491 Revision: 29-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 16F(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 16 A FORWARD CONDUCTION PARAMETER Maximum average forward current at case temperature Maximum RMS forward current Maximum on-repetitive peak reverse power SYMBOL IF(AV) IF(RMS) PR(1) 10 µs square pulse, TJ = TJ maximum t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current t = 8.3 ms IFSM t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t for fusing I 2 √t VF(TO)1 VF(TO)2 rf1 rf2 VFM No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied TEST CONDITIONS 180° conduction, half sine wave VALUES 16 140 25 15 350 370 295 Sinusoidal half wave, initial TJ = TJ maximum 310 612 560 435 395 6120 0.77 0.90 7.80 mΩ (I > π x IF(AV)), TJ = TJ maximum Ipk = 50 A, TJ = 25 °C, tp = 400 µs rectangular wave 5.70 1.23 V A2√s V A2s A UNITS A °C A K/W t = 0.1 to 10 ms, no voltage reapplied (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum (I > π x IF(AV)), TJ = TJ maximum (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level value of forward slope resistance Maximum forward voltage drop Note (1) Available only for avalanche version, all other parameters the same as 16F THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, case to heatsink SYMBOL TJ TStg RthJC RthCS DC operation Mounting surface, smooth, flat and greased Not lubricated threads Allowable mounting torque Lubricated threads Approximate weight Case style See dimensions - link at the end of datasheet TEST CONDITIONS VALUES - 65 to 175 - 65 to 200 1.6 K/W 0.5 1.5 + 0 - 10 % (13) 1.2 + 0 - 10 % (10) 7 0.25 N·m (lbf · in) N·m (lbf · in) g oz. UNITS °C DO-203AA (DO-4) www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 93491 Revision: 29-Sep-08 16F(R) Series Standard Recovery Diodes Vishay High Power Products (Stud Version), 16 A ΔRthJC CONDUCTION CONDUCTION ANGLE 180° 120° 90° 60° 30° SINUSOIDAL CONDUCTION 0.31 0.38 0.49 0.72 1.20 RECTANGULAR CONDUCTION 0.23 0.40 0.54 0.75 1.21 TJ = TJ maximum K/W TEST CONDITIONS UNITS Note • The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Maximum Allowable Case Temperature (°C) 16F(R) Series RthJC (DC) = 1.6 K/W Maximum Allowable Case Temperature (°C) 180 180 16F(R) Series RthJC (DC) = 1.6 K/W 170 170 160 Conduction Angle 160 Conduction Period 150 150 90° 60° 120° 30° 130 0 5 10 15 20 25 30 Average Forward Current (A) 180° DC 140 60° 30° 130 0 4 8 90° 120° 180° 12 16 20 140 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) 20 180° 120° 90° 60° 30° RMS Limit 8 Conduction Angle Fig. 2 - Current Ratings Characteristics R 16 6K /W 8K /W 10 K /W th SA = 4K /W -D elt aR 12 15 K/W 20 K/W 4 30 K/W 16F(R) Series T = 175°C J 0 4 8 12 16 20 0 25 50 75 100 0 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 3 - Forward Power Loss Characteristics Document Number: 93491 Revision: 29-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 16F(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 16 A Maximum Average Forward Power Loss (W) 25 DC 180° 120° 90° 60° 30° R 20 6K /W th SA = RMS Limit 8K /W 10 K /W 4K /W -D elt aR 15 10 Conduction Period 15 K/W 20 K/W 5 30 K/W 16F(R) Series T = 175°C J 0 5 10 15 20 25 30 0 25 50 75 100 0 Average Forward Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 4 - Forward Power Loss Characteristics 325 300 275 250 225 200 175 150 125 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Peak Half Sine Wave Forward Current (A) Instantaneous Forward Current (A) At Any Rated Load Condition And With Rated V RRMApplied Following Surge. Initial T = 175°C J @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 1000 T = 25°C J T = 175°C J 100 10 16F(R) Series 16F(R) Series 1 0 1 2 3 4 5 6 Instantaneous Forward Voltage (V) Fig. 5 - Maximum Non-Repetitive Surge Current Peak Half Sine Wave Forward Current (A) 350 325 300 275 250 225 200 175 150 125 0.01 16F(R) Series Fig. 7 - Forward Voltage Drop Characteristics 10 Steady State Value RthJC = 1.6 K/W (DC Operation) Transient Thermal Impedance ZthJC (K/W) Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 175°C No Voltage Reapplied Rated VRRM Reapplied 1 16F(R) Series 0.1 0.001 0.1 Pulse Train Duration (s) 1 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 8 - Thermal Impedance ZthJC Characteristics www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 93491 Revision: 29-Sep-08 16F(R) Series Standard Recovery Diodes Vishay High Power Products (Stud Version), 16 A ORDERING INFORMATION TABLE Device code 16 1 1 2 3 - F 2 R 3 120 4 M 5 Current rating: Code = IF(AV) F = Standard device None = Stud normal polarity (cathode to stud) R = Stud reverse polarity (anode to stud) 4 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) None = Stud base DO-203AA (DO-4) 10-32UNF-2A M = Stud base DO-203AA (DO-4) M5 x 0.8 (not available for avalanche diodes) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95311 Document Number: 93491 Revision: 29-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1