16LH_08

Series REC 16 LH Vishay Sfernice Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element (Unsealed Series/Ø 16 mm) FEATURES • Large range of strokes from 25 to 2000 mm • High accuracy • Very good repeatability • Continuous resolution • Easy mounting These unsealed sensors are suitable for installation in the high pressure chamber of cylinders. RoHS COMPLIANT ELECTRICAL SPECIFICATIONS Theoretical Electrical Travel (TET) = E Independent Linearity (over TET) On Request Actual Electrical Travel (AET) Total Resistance RT Resistance Tolerance at 20 °C Repeatability Maximum Power Rating Wiper Current Load Impedance Insulation Resistance Dielectric Strength From 25 mm to 2000 mm in increments of 25 mm ≤ ± 1 %; ≤ ± 0.1 % ≤ ± 0.05 % if E ≥ 100 mm, ≤ ± 0.025 % if E ≥ 200 mm TET + 6 mm ± 0.5 150 Ω/cm ± 20 % ≤ 0.01 % 0.05 W/cm at 70 °C, 0 W at 125 °C Recommended: a few µA - 1 mA max. (continuous) 1000 times RT minimum > 1000 MΩ, 500 VDC > 300 VRMS at 50 Hz MECHANICAL SPECIFICATIONS Mechanical Travel (MT) Body Rod Internal Diameter Support Operating Force Electrical Outputs Oil Pressure Wiper MT = TET Anodized aluminum 16 LH: Ø 18 mm 2 screws 1 N typical Wires 300 mm long Insulating mineral hydraulic 300 bars continuous, 1000 bars accidentally Precious metal multifinger PERFORMANCE Life Temperature Limits Speed at 20 °C 25 million cycles typical/1 Hz/T° = 20 °C ± 5 °C/80 % TET - 20 °C to + 80 °C 1.5 m/s max. Document Number: 54016 Revision: 01-Feb-08 For technical questions, contact: sfer@vishay.com www.vishay.com 59 Series REC 16 LH Vishay Sfernice Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element (Unsealed Series/Ø 16 mm) DIMENSIONS in millimeters, general tolerance ± 1 mm Ø 18 - 0.2 +0 FIXING SCREWS Hc M4-8 AET = TET + 6 ELECTRICAL CONTINUITY = TET + 3 1.5 1.5 MODEL 16 LH ØA 18 L ≤ 500 L > 500 6 46 3 MT = TET L = TET + 70 8.5 0.2 Ø C + 0.2 0.2 Ø B+ 0 - Ø D + 0.1 Ø D + 0.6 + 0.1 + 0.4 0.1 E+0 - G - 0.1 +1 F -0 + 0.1 MODEL 16 LH B 25.2 C 24 D 18 E 1.3 F 17.8 G 16.3 MOUNTING IN ACTUATOR ELECTRICAL CONNECTIONS GREEN WIRE: + RED WIRE: WIPER YELLOW WIRE: TET AET TET = THEORETICAL ELECTRICAL TRAVEL AET = ACTUAL ELECTRICAL TRAVEL On these models: Cylinder sealing and electrical connections required ORDERING INFORMATION/DESCRIPTION REC SERIES 16 MODEL LH TYPE 4 THEORETICAL ELECTRICAL Times 25 mm D LINEARITY A: ≤ ± 1 % D: ≤ ± 0.1 % E: ≤ ± 0.05 % F: ≤ ± 0.025 % 152 RESISTANCE W... MODIFICATIONS e. LEAD FINISH Unsealed First 2 digits are significant numbers 3rd digit indicates number of zeros Special feature code number SAP PART NUMBERING GUIDELINES RE SERIES 16 LH MODEL 4 TET D LINEARITY 152 OHMIC VALUE W.... SPECIAL FEATURES www.vishay.com 60 For technical questions, contact: sfer@vishay.com Document Number: 54016 Revision: 01-Feb-08 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1