175BGQ030

175BGQ030 Vishay High Power Products Schottky Rectifier, 175 A FEATURES • • • • • 150 °C TJ operation High frequency operation Ultralow forward voltage drop RoHS COMPLIANT Continuous high current operation Guard ring for enhanced ruggedness and long term reliability • PowerTabTM package • Lead (Pb)-free plating Cathode Anode PowerTabTM DESCRIPTION PRODUCT SUMMARY IF(AV) VF at 175 A at 25 °C IR at 125 °C VR 175 A 0.59 V 650 mA 30 V The 175BGQ030 Schottky rectifier has been optimized for ultralow forward voltage drop specifically for low voltage output in high current AC/DC power supplies. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, reverse battery protection, and redundant power subsystems. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 175 Apk (typical) TJ Range CHARACTERISTICS Rectangular waveform TC VALUES 175 112 30 7400 0.47 150 - 55 to 150 UNITS A °C V A V °C °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 175BGQ030 30 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TEST CONDITIONS 50 % duty cycle at TC = 112 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 175 7400 A 1400 80 12 mJ A UNITS A TJ = 25 °C, IAS = 12 A, L = 1.12 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 94583 Revision: 30-Oct-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 175BGQ030 Vishay High Power Products Schottky Rectifier, 175 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 100 A Forward voltage drop VFM (1) 175 A 100 A 175 A TJ = 125 °C, VR = 15 V Reverse leakage current IRM (1) TJ = 150 °C, VR = 30 V TJ = 25 °C TJ = 125 °C Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % CT LS dV/dt VR = Rated VR TEST CONDITIONS TJ = 25 °C TYP. 0.47 0.55 0.36 0.47 160 1400 1.3 450 8500 3.5 10 000 MAX. 0.49 0.59 0.39 0.52 220 2000 4.5 650 pF nH V/µs mA V UNITS TJ = 150 °C VR = 5 VDC, (test signal range 100 kHz to 1 MHz) 25 °C Measured from tab to mounting plane Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style PowerTabTM SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 150 0.25 °C/W 0.20 5 0.18 1.2 (10) 2.4 (20) g oz. N·m (lbf · in) UNITS °C Mounting torque Marking device 175BGQ045 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94583 Revision: 30-Oct-08 175BGQ030 Schottky Rectifier, 175 A Vishay High Power Products 1000 10000 1000 Reverse Current - IR (mA) 150°C 125°C 100°C 100 10 1 75°C 50°C 25°C Instantaneous Forward Current - IF (A) 100 Tj = 150°C 0.1 0.01 0 5 10 15 20 25 30 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10000 10 Junc tion Cap acitance - C T (pF ) T = 25°C J Tj = 125°C Tj = 25°C 1 0.0 0.2 0.4 0.6 0.8 1.0 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 1000 0 5 10 15 20 25 30 35 Reverse Voltage - V (V) R Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 1 Thermal Impedance ZthJC (°C/W) D = 0.5 D = 0.33 D = 0.25 D = 0.2 D = 0.75 0.1 Single Pulse (Thermal Resistance) 0.01 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94583 Revision: 30-Oct-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 175BGQ030 Vishay High Power Products Schottky Rectifier, 175 A 160 Allowable Case Temperature (°C) 160 140 DC 120 100 80 60 0 50 100 150 200 250 300 Average Forward Current - IF(AV) (A) Square wave (D=0.50) 80% rated Vr applied see note (1) Average Power Loss - (Watts) 140 120 100 80 60 40 20 0 0 180° 120° 90° 60° 30° RMS Limit DC 50 100 150 200 250 Average Forward Current - IF(AV) (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 10000 Fig. 6 - Forward Power Loss Characteristics Non-Repetitive Surge Current - IFSM (A) 1000 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR For technical questions, contact: diodes-tech@vishay.com Document Number: 94583 Revision: 30-Oct-08 www.vishay.com 4 175BGQ030 Schottky Rectifier, 175 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 175 BGQ 030 1 1 2 3 - 2 3 Current rating Essential part number Voltage code = VRRM LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95240 http://www.vishay.com/doc?95370 Document Number: 94583 Revision: 30-Oct-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1