20L15TSTRLPBF

20L15TSPbF Vishay High Power Products Schottky Rectifier, 20 A FEATURES • 125 °C TJ operation (VR < 5 V) • Single diode configuration Base cathode 2 Available • Optimized for OR-ing applications • Ultra low forward voltage drop RoHS* COMPLIANT • Guard ring for enhanced ruggedness and long term reliability 1 N/C 3 Anode D2PAK • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Lead (Pb)-free (“PbF” suffix) • Designed and qualified for Q101 level DESCRIPTION PRODUCT SUMMARY IF(AV) VR IRM 20 A 15 V 600 mA at 100 °C The Schottky rectifier module has been optimized for ultra low forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125 °C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 19 Apk, TJ = 125 °C (typical) Range CHARACTERISTICS Rectangular waveform VALUES 20 15 700 0.25 - 55 to 125 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM TEST CONDITIONS TJ = 100 °C 20L15TSPbF 15 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 Maximum peak one cycle non-repetitive surge current See fig. 7 Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) TEST CONDITIONS 50 % duty cycle at TC = 85 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 2 A, L = 6 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical Following any rated load condition and with rated VRRM applied VALUES 20 700 330 10 2 mJ A A UNITS * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94166 Revision: 14-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 20L15TSPbF Vishay High Power Products ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 19 A Forward voltage drop See fig. 1 VFM (1) 40 A 19 A 40 A Reverse leakage current See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance Typical series inductance Maximum voltage rate of change IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 100 °C TJ = TJ maximum VR = 5 VDC, (test signal range 100 kHz to 1 MHz) 25 °C Measured lead to lead 5 mm from package body Rated VR 8 10 000 TEST CONDITIONS TJ = 25 °C TYP. 0.25 0.37 0.182 7.6 2000 MAX. 0.41 0.52 0.33 0.50 10 600 mA V mΩ pF nH V/µs V UNITS Schottky Rectifier, 20 A TJ = 125 °C VR = Rated VR Note (1) Pulse width < 300 µs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, case to heatsink Maximum thermal resistance, junction to ambient Approximate weight minimum maximum SYMBOL TJ TStg RthJC RthCS RthJA DC operation See fig. 4 Mounting surface, smooth and greased (For TO-220) DC operation TEST CONDITIONS VALUES - 55 to 125 °C - 55 to 150 1.5 0.50 40 2 0.07 Non-lubricated threads Case style D2PAK 6 (5) 12 (10) 20L15TS g oz. kgf ⋅ cm (lbf ⋅ in) °C/W UNITS Mounting torque Marking device www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94166 Revision: 14-Aug-08 20L15TSPbF Schottky Rectifier, 20 A Vishay High Power Products 1000 1000 IR - Reverse Current (mA) TJ = 100 °C 100 IF - Instantaneous Forward Current (A) 100 TJ = 75 °C TJ = 50 °C 10 10 TJ = 125 °C TJ = 75 °C TJ = 25 °C TJ = 25 °C 1 1 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 3 6 9 12 15 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10 000 CT - Junction Capacitance (pF) TJ = 25 °C 1000 100 0 5 10 15 20 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 Single pulse (themal resistance) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 t1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 0.01 0.00001 0.0001 0.001 0.01 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94166 Revision: 14-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 20L15TSPbF Vishay High Power Products 100 95 90 Schottky Rectifier, 20 A Allowable Case Temperature (°C) 14 Average Power Loss (W) 12 10 8 6 4 2 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Square wave (D = 0.50) 85 80 75 RMS limit See note (1) 70 DC 0 4 8 12 16 20 24 0 5 10 15 20 25 30 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94166 Revision: 14-Aug-08 20L15TSPbF Schottky Rectifier, 20 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 20 1 1 2 3 4 5 6 - L 2 15 3 T 4 S 5 TRL PbF 6 7 Current rating (20 A) L = Low VF Voltage rating (15 = 15 V) T = Schottky series S = D2PAK None = Tube (50 pieces) TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 7 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95014 http://www.vishay.com/doc?95008 http://www.vishay.com/doc?95032 Document Number: 94166 Revision: 14-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1