20MQ060NTRPBF

VS-20MQ060NPbF Vishay Semiconductors Schottky Rectifier, 2.1 A FEATURES • Low forward voltage drop Cathode Anode • Guard ring for enhanced ruggedness and long term reliability • Small foot print, surface mountable • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SMA PRODUCT SUMMARY Package IF(AV) VR VF at IF IRM TJ max. Diode variation EAS SMA 2.1 A 60 V See Electrical table 7.5 mA at 125 °C 150 °C Single die 2.0 mJ • Compliant to RoHS Directive 2002/95/EC • Designed and qualified for industrial level DESCRIPTION The VS-20MQ060NPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 2 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform VALUES 2.1 60 40 0.68 - 55 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-20MQ060NPbF 60 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 4 Maximum peak one cycle non-repetitive surge current See fig. 6 Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) TEST CONDITIONS 50 % duty cycle at TC = 107 °C, rectangular waveform On PC board 9 mm2 island (0.013 mm thick copper pad area) 5 μs sine or 3 μs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 1 A, L = 4 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Following any rated load condition and with rated VRRM applied VALUES 2.1 40 A 10 2.0 1.0 mJ A UNITS A Document Number: 94592 Revision: 26-Oct-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 VS-20MQ060NPbF Vishay Semiconductors Schottky Rectifier, 2.1 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 2A 1.5 A Maximum forward voltage drop See fig. 1 VFM (1) 1A 2A 1.5 A 1A Maximum reverse leakage current See fig. 2 Threshold voltage Forward slope resistance Typical junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 10 VDC, TJ = 25 °C, test signal = 1 MHz Measured lead to lead 5 mm from package body Rated VR VR = Rated VR TJ = 125 °C TJ = 25 °C TEST CONDITIONS VALUES 0.78 0.71 0.63 0.68 0.63 0.57 0.5 7.5 0.45 86.8 31 2.0 10 000 mA V m pF nH V/μs V UNITS THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to ambient Approximate weight Marking device Note (1) SYMBOL TJ (1), TStg RthJA DC operation TEST CONDITIONS VALUES - 55 to 150 80 0.07 0.002 UNITS °C °C/W g oz. 2H Case style SMA (similar D-64) dP tot 1 ------------ < ------------- thermal runaway condition for a diode on its own heatsink dT J R thJA www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94592 Revision: 26-Oct-10 VS-20MQ060NPbF Schottky Rectifier, 2.1 A Vishay Semiconductors IF - Instantaneous Forward Current (A) Allowable Case Temperature (°C) 10 160 150 140 130 120 110 100 90 80 70 60 50 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Square wave (D = 0.50) Rated VR applied See note (1) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 DC 1 TJ = 150 °C TJ = 125 °C TJ = 25 °C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 94592_04 94592_01 VFM - Forward Voltage Drop (V) IF(AV) - Average Forward Current (A) Fig. 4 - Maximum Average Forward Current vs. Allowable Lead Temperature Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 1.4 IR - Reverse Current (mA) Average Power Loss (W) 10 1 0.1 0.01 TJ = 150 °C TJ = 125 °C TJ = 100 °C TJ = 75 °C TJ = 50 °C 1.2 1.0 0.8 0.6 0.4 0.2 0 RMS limit D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 0.001 0.0001 0 10 20 TJ = 25 °C 30 40 50 60 94592_05 0 0.4 0.8 1.2 1.6 2.0 2.4 94592_02 VR - Reverse Voltage (V) Fig. 2 - Typical Peak Reverse Current vs. Reverse Voltage IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Average Forward Dissipation vs. Average Forward Current 100 IFSM - Non-Repetitive Surge Current (A) 100 At any rated load condition and with rated VRRM applied following surge CT - Junction Capacitance (pF) 10 TJ = 25 °C 10 0 94592_03 1 10 100 1000 10 000 10 20 30 40 50 60 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 94592_06 tp - Square Wave Pulse Duration (μs) Fig. 6 - Maximum Peak Surge Forward Current vs. Pulse Duration Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Document Number: 94592 Revision: 26-Oct-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 VS-20MQ060NPbF Vishay Semiconductors ORDERING INFORMATION TABLE Device code Schottky Rectifier, 2.1 A VS1 1 2 3 4 5 6 7 8 - 20 2 M 3 Q 4 060 5 N 6 TR 7 PbF 8 Vishay Semiconductors product Current rating M = SMA Q = Schottky “Q” series Voltage rating (060 = 60 V) N = New SMA None = Box (1000 pieces) TR = Tape and reel (7500 pieces) PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information SPICE model Tape and reel Bulk www.vishay.com/doc?95018 www.vishay.com/doc?95029 www.vishay.com/doc?95034 www.vishay.com/doc?95397 www.vishay.com/doc?95396 www.vishay.com 4 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 94592 Revision: 26-Oct-10 Outline Dimensions Vishay High Power Products SMA DIMENSIONS in millimeters (inches) 1.40 (0.055) 1.60 (0.062) 2.50 (0.098) 2.90 (0.114) 1 2 4.00 (0.157) 4.60 (0.181) 1 Polarity 2 Part Number 0.152 (0.006) 0.305 (0.012) 2.00 (0.078) 2.44 (0.096) 0.103 (0.004) 0.203 (0.008) 2.10 MAX. (0.085 MAX. ) 1.47 MIN. (0.058 MIN.) 0.76 (0.030) 1.52 (0.060) 4.80 (0.188) 5.28 (0.208) 1.27 MIN. (0.050 MIN.) 5.53 (0.218) Soldering pad Document Number: 95018 Revision: 25-Jun-07 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1