285D

TYPE 285D Foil Tantalum Replacement Gelled-Electrolyte Sintered Anode TANTALEX® Capacitors For Operation to + 125ºC, Hermetically-Sealed FEATURES Type 285D capacitors are commercial replacements for Military Style M39006/01, 02, 03, 04 and are designed to meet the performance requirements of Military Specification MIL-C-39006. Internal cells are M39006/22 & 25. They feature a high ripple current capability with an extended temperature range, very low impedances over wide frequency ranges and a long history of reliable operation. PERFORMANCE CHARACTERISTICS Operating Temperature: - 55°C to + 85°C. (To +125˚C with voltage derating.) Capacitance Tolerance: At 120 Hz, + 25°C. ± 20% standard. ± 10%, ± 5% available as special. DC Leakage Current (DCL Max.): At + 25°C, + 85°C, + 125°C: Leakage current shall not exceed the values listed in the Standard Ratings Tables. Life Test: Capacitors are capable of withstanding a 2000 hour life test at a temperature of + 85°C or + 125°C at the applicable DC working voltage. Following the life test: 1. DCL shall not exceed the initial requirements. 2. The DF shall meet the initial requirement. 3. Change in capacitance shall not exceed 10% from the initial measurement. For capacitors with voltage ratings of 15 WVDC and below, change in capacitance shall not exceed + 10%, - 25% from the initial measurement. DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters] Case Material: Aluminum Case Neutral 2.30 Max. L 2.30 Max. .025 ± .002 Dia. ( 2 Plcs. ) Black Elastomer End Seal Marking Area D Internal Weld. Red Epoxy Fill CASE CODE G1 G2 G3 G4 G5 BARE CASE L 0.688 ± 0.062 [17.48 ± 1.57] 0.969 ± 0.062 [24.61 ± 1.57] 1.438 ± 0.062 [36.53 ± 1.57] 2.125 ± 0.062 [53.98 ± 1.57] 2.750 ± 0.062 [69.85 ± 1.57] D 0.188 ± 0.016 [4.78 ± 0.41] 0.281 ± 0.016 [7.14 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] WITH INSULATION SLEEVE D (MAX.) 0.219 [5.56] 0.312 [7.92] 0.406 [10.31] 0.406 [10.31] 0.406 [10.31] C (MAX.) 1.188 [30.18] 1.469 [37.31] 1.938 [49.23] 2.625 [66.68] 3.250 [82.55] STANDARD/EXTENDED RATINGS, POLARIZED CAPACITANCE (µF) CASE CODE CAP. TOL. (±%) Max. DCL (µA) @ + 85°C + 125°C + 25°C Max. IMP. @ - 55°C (Ohms) PART NUMBER* 15 WVDC @ + 85°C . . . 10 WVDC @ + 125°C 18.0 55.0 110.0 160.0 G2 G3 G4 G5 20 20 20 20 285D186X0015G2 285D556X0015G2 285D117X0015G4 285D167X0015G5 2.0 2.0 4.0 5.0 4.0 10.0 20.0 30.0 125 41 20 14 Vishay Sprague 5900 Australian Avenue, West Palm Beach, FL 33407 • Phone (561) 863-1800 • Fax 561-863-1811 • Internet www.vishay.com 188 Major Vishay Brands Dale • Draloric • Foil Resistors • Lite-On PSC • Measurements Group • Roederstein • Sfernice • Siliconix • Sprague • Telefunken • Thin Film • Vitramon TYPE 285D STANDARD/EXTENDED RATINGS, POLARIZED CAPACITANCE (µF) CASE CODE CAP. TOL. (±%) Max. DCL (µA) @ + 85°C + 25°C + 125°C Max. IMP. @ - 55°C (Ohms) PART NUMBER* 25 WVDC @ + 85°C . . . 15 WVDC @ + 125°C 12.0 35.0 70.0 100.0 G2 G3 G4 G5 20 20 20 20 285D126X0025G2 285D356X0025G3 285D706X0025G4 285D107X0025G5 2.0 2.0 4.0 6.0 4.0 10.0 20.0 30.0 186 64 32 23 30 WVDC @ + 85°C . . . 20 WVDC @ + 125°C 10.0 30.0 60.0 85.0 G2 G3 G4 G5 20 20 20 20 285D106X0030G2 285D306X0030G3 285D606X0030G4 285D856X0030G5 2.0 2.0 4.0 6.0 5.0 13.0 26.0 38.0 265 75 37 27 35 WVDC @ + 85°C . . . 25 WVDC @ + 125°C 68.0 G5 20 285D686X0035G5 5.0 25.0 40 50 WVDC @ + 85°C . . . 30 WVDC @ + 125°C 6.0 20.0 40.0 55.0 G2 G3 G4 G5 20 20 20 20 285D605X0050G2 285D206X0050G3 285D406X0050G4 285D556X0050G5 2.0 2.0 4.0 6.0 6.0 13.0 26.0 38.0 372 112 56 41 75 WVDC @ + 85°C . . . 50 WVDC @ + 125°C 4.0 14.0 28.0 40.0 G2 G3 G4 G5 20 20 20 20 285D405X0075G2 285D146X0075G3 285D286X0075G4 285D406X0075G5 2.0 2.0 4.0 6.0 6.0 13.0 26.0 38.0 558 159 80 56 100 WVDC @ + 85°C . . . 65 WVDC @ + 125°C 3.0 10.0 20.0 30.0 G2 G3 G4 G5 20 20 20 20 285D305X0100G2 285D106X0100G3 285D206X0100G4 285D306X0100G5 2.0 2.0 3.0 6.0 6.0 13.0 25.0 38.0 743 223 112 74 150 WVDC @ + 85°C . . . 100 WVDC @ + 125°C 14.0 20.0 G4 G5 20 20 285D146X0150G4 285D206X0150G5 4.0 6.0 26.0 38.0 159 112 200 WVDC @ + 85°C . . . 150 WVDC @ + 125°C 5.0 10.0 15.0 G3 G4 G5 15 15 15 285D505X0200G3 285D106X0200G4 285D156X0200G5 16.0 28.0 40.0 64.0 100.0 160.0 400 200 130 250 WVDC @ + 85°C . . . 165 WVDC @ + 125°C 4.0 8.0 12.0 G3 G4 G5 15 15 15 285D405X0250G3 285D805X0250G4 285D126X0250G5 16.0 28.0 40.0 80.0 140.0 200.0 500 250 160 300 WVDC @ + 85°C . . . 200 WVDC @ + 125°C 10.0 G5 15 285D106X0300G5 50.0 250.0 225 * Other Ratings Available. Non-Polar ratings available. Please consult factory. Note: Dissipation Factor limits (maximum): 50 volts and below, - 20%; above 50 volts, -15%. HOW TO ORDER 285D TYPE 126 CAPACITANCE X0 CAPACITANCE TOLERANCE X0 = ± 20% X9 = ± 10% X5 = ± 5% 250 DC VOLTAGE RATING AT + 85°C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. G5 CASE CODE 0 STYLE NUMBER This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. See Ratings and Case Codes Table. 0 = No outer tube. 2 = Outer polyester-film insulation. Packaging: The use of formed plastic trays for packaging this type of axial lead component is standard. Tape and Reel is not recommended because of the unit weight and size. Vishay Sprague 5900 Australian Avenue, West Palm Beach, FL 33407 • Phone (561) 863-1800 • Fax 561-863-1811 • Internet www.vishay.com Major Vishay Brands Dale • Draloric • Foil Resistors • Lite-On PSC • Measurements Group • Roederstein • Sfernice • Siliconix • Sprague • Telefunken • Thin Film • Vitramon 189