2KBB100

2KBB Series Vishay High Power Products Single Phase Rectifier Bridge, 1.9 A FEATURES • Suitable for printed circuit board mounting • Leads on standard 2.54 mm (0.1") grid • Compact construction • High surge current capability • Polarized package • Equivalent to standard DIN parts 2KBB RoHS COMPLIANT • RoHS compliant DESCRIPTION PRODUCT SUMMARY IO VRRM 1.9 A 100 to 1000 V A 1.9 A single phase diode bridge rectifier assembly consisting of four silicon diodes in a plastic encapsulation, intended for general applications in industrial and consumer equipment. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO IFSM I2 t VRRM TJ 50 Hz 60 Hz 50 Hz 60 Hz CHARACTERISTICS VALUES 1.9 50 52 17.7 16.1 100 to 1000 - 40 to 150 UNITS A A A2 s V °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS AND APPLICATION DATA CROSS REFERENCE IRM VRRM, VRSM TYPICAL PEAK REVERSE MAXIMUM PEAK CURRENT PER DIODE REVERSE VOLTAGE AT RATED VRRM TJ = 15 °C (µA) (V) TJ = 25 °C TJ = 150 °C 50 100 200 400 600 800 1000 10 10 10 10 10 10 10 500 500 500 500 500 500 500 APPLICATION DATA (SEE FIGURE 3) CMAX RMIN VRMS MAXIMUM RECOMMENDED MAXIMUM MINIMUM AC SUPPLY LOAD SOURCE VOLTAGE CAPACITANCE RESISTANCE (V) (µF) (Ω) 20 40 80 125 250 380 500 7000 5000 3300 1600 1200 800 600 0.3 0.5 0.8 1.5 2.5 3.0 5.0 PART NUMBER DIN CODE 2KBB05 2KBB10 2KBB20 2KBB40 2KBB60 2KBB80 2KBB100 B20C1500 B40C1500 B80C1500 B125C1500 B250C1500 B380C1500 B500C1500 Note • For PIN configuration - ~ ~ + add “R” to end of part number, e.g. 2KBB05R (see also dimensions for details - link at the end of datasheet) Document Number: 93561 Revision: 17-Jun-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 2KBB Series Vishay High Power Products Single Phase Rectifier Bridge, 1.9 A FORWARD CONDUCTION PARAMETER Maximum DC output current Maximum peak one cycle, non-repetitive surge current SYMBOL IO TEST CONDITIONS TC = 45 °C, resistive and inductive load TC = 45 °C, capacitive load t = 6 ms IFSM t = 5 ms t = 10 ms for fusing, Maximum initial TJ = TJ maximum I2√t I2t I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum capability for fusing I2√t (1) VFM f t = 0.1 to 10 ms, VRRM following surge = 0 IO = 1.9 A (3.0 Apk) Following any rated load condition, and with rated VRRM applied following surge Rated VRRM applied following surge, initial TJ = 150 °C VALUES 1.9 1.5 50 A 52 12.5 11.3 17.7 16.1 177 1.1 40 to 2000 A2√s V Hz A2 s UNITS A Maximum peak forward voltage per diode Operating frequency range Note (1) I2t for time t = I2√t • √t x x THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Operating junction and storage temperature range Approximate weight SYMBOL TJ, TStg VALUES - 40 to 150 4 0.14 UNITS °C g oz. Average Output Current (A) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 Resistive, inductive load Maximum Peak Output Current (A) 2.0 60 50 40 30 20 10 0 10-2 Capacitive load 80 100 120 140 160 10-1 1 10 Maximum Allowable Ambient Temperature (°C) Fig. 1 - Average (DC) Output Current vs. Maximum Allowable Ambient Temperature Equal Amplitude Pulse Train Duration (s) Fig. 2 - Maximum Non-Repetitive Surge Current vs. Pulse Train Duration (f = 50 Hz) www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 93561 Revision: 17-Jun-08 2KBB Series Single Phase Rectifier Bridge, 1.9 A 600 CL = 200 µF 500 CL = 600 µF 400 CL = 800 µF 300 CL = 1200 µF 200 CL = 3300 µF 100 CL = 7000 µF 0 0 1 2 3 4 5 6 10-1 1 10 102 103 CL = 5000 µF CL = 1600 µF 10 Vishay High Power Products Average Output Current (A) CL = 400 µF RMS Supply Voltage (V) 5 Resistive, inductive load 2 Capacitive load 1 0.5 Minimum Required Value of Source Resistance (Ω) Fig. 3 - Minimum Required Source Resistance vs. RMS Supply Voltage and Load Capacitance Switch-On Surge Duration (s) Fig. 4 - Maximum Switch-On Surge Current vs. Surge Duration CIRCUIT CONFIGURATION AC (+) AC (-) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95328 Document Number: 93561 Revision: 17-Jun-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1