309URA200

301U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 300 A FEATURES • Wide current range • High voltage rating up to 2500 V • High surge current capabilities • Stud cathode and stud anode version DO-205AB (DO-9) RoHS COMPLIANT • High resistance to acceleration • RoHS compliant • Designed and qualified for industrial level TYPICAL APPLICATIONS PRODUCT SUMMARY IF(AV) 300 A • Converters • Power supplies • Machine tool controls • High power drives • Medium traction applications MAJOR RATINGS AND CHARACTERISTICS 301U(R) PARAMETER TEST CONDITIONS 160 TO 200 330 IF(AV) IF(RMS) 50 Hz IFSM 60 Hz 50 Hz 60 Hz VRRM TJ Range TC 120 520 8250 8640 340 311 1600 to 2000 - 40 to 180 250 300 120 470 6050 A 6335 183 167 2500 - 40 to 180 V °C kA2s A °C A UNITS I2 t ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 160 301U(R) 200 250 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 1600 2000 2500 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 1700 2100 2600 15 IRRM MAXIMUM AT TJ = TJ MAXIMUM mA Document Number: 93509 Revision: 23-Jun-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 301U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 300 A FORWARD CONDUCTION PARAMETER Maximum average forward current at case temperature Maximum RMS forward current SYMBOL TEST CONDITIONS 301U(R) 160 TO 200 330 120 520 8250 8640 6940 Sinusoidal half wave, initial TJ = TJ maximum 7270 340 311 241 220 3400 0.77 0.84 0.49 0.49 1.22 250 300 120 470 6050 6335 5090 5330 183 167 129 118 1830 0.90 0.97 0.59 mΩ rf2 VFM (I > π x IF(AV)), TJ = TJ maximum Ipk = 942 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 0.55 1.46 V kA2√s V kA2s A UNITS A °C A IF(AV) IF(RMS) 180° conduction, half sine wave DC at TC = 115 °C (up to 2000 V), TC = 102 °C (2500 V) t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied Maximum peak, one cycle forward, non-repetitive surge current IFSM Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t for fusing I2√t VF(TO)1 VF(TO)2 rf1 t = 0.1 to 10 ms, no voltage reapplied (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum (I > π x IF(AV)), TJ = TJ maximum (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level value of forward slope resistance Maximum forward voltage drop THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, case to heatsink Maximum allowed mounting torque + 0 - 20 % 301U 303U Weight 305U 307U 309U Case style See dimensions - link at the end of datasheet SYMBOL TJ TStg RthJC RthCS DC operation Mounting surface, smooth, flat and greased Not lubricated threads Lubricated threads TEST CONDITIONS VALUES - 40 to 180 °C - 40 to 200 0.14 K/W 0.08 37 28 250 ± 5 152 ± 5 177 ± 5 197 ± 5 160 ± 5 DO-205AB (DO-9) g N·m UNITS www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 93509 Revision: 23-Jun-08 301U(R) Series Standard Recovery Diodes Vishay High Power Products (Stud Version), 300 A ΔRthJC CONDUCTION CONDUCTION ANGLE 180° 120° 90° 60° 30° SINUSOIDAL CONDUCTION 80 TO 200 0.015 0.018 0.023 0.034 0.056 250 0.015 0.018 0.023 0.034 0.056 RECTANGULAR CONDUCTION 80 TO 200 0.011 0.019 0.025 0.035 0.057 250 0.011 0.019 0.025 0.035 0.057 TJ = TJ maximum K/W TEST CONDITIONS UNITS Note • The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC 301U(R) S eries(1600V to 2000V) RthJC (DC) = 0.14 K/ W Maximum Allowable Case T emperat ure (°C) Maximum Allowable Case T emperature (°C) 180 170 160 150 140 130 180 301U(R S ) eries (2500V) 170 160 150 140 30° 130 120 110 0 50 100 150 200 250 300 350 Average Forward Current (A) 60° 90° 120° Conduction Angle RthJC (DC) = 0.14 K/ W Conduction Angle 30° 120 110 0 50 100 150 60° 180° 90° 120° 180° 200 250 300 350 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 3 - Current Ratings Characteristics Maximum Allowable Cas T e emperature (°C) Maximum Allowable Cas T e emperature (°C) 180 170 160 150 140 130 120 110 100 0 100 200 300 400 30° 60° 90° 120° 180° DC 500 600 Conduction Period 180 301U(R S ) eries (2500V) 170 160 150 140 130 120 110 100 90 0 100 200 300 400 500 Average Forward Current (A) 30° 60° 90° 120° 180° DC Conduction Period 301U(R S ) eries(1600V to 2000V) RthJC (DC) = 0.14 K/ W RthJC (DC) = 0.14 K/ W Average Forward Current (A) Fig. 2 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Document Number: 93509 Revision: 23-Jun-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 301U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 300 A Maximum Avera ge F orward P ower Loss (W) 400 350 300 250 200 0.7 K/ W 180° 120° 90° 60° 30° RMSLimit Rt A hS 2 0. W K/ 0. 3 K/ W = 1 0. W K/ ta el -D R 150 100 50 0 0 50 100 150 Conduction Angle 301U(R) S eries (1600V to 2000V) TJ = 180°C 200 250 300 1.5 K / 3 K/ W W 350 20 40 60 80 100 120 140 160 180 Average Forward Current (A) Maximum Allowable Ambient T emperature (°C) Fig. 5 - Forward Power Loss Characteristics 550 500 450 400 350 300 250 RMSLimit 200 150 100 50 0 Conduc tion Period 0.7 K/ W Maximum Average F orward Power Los (W) s DC 180° 120° 90° 60° 30° R th SA = 0. 1 K/ W 0. 2 K/ W -D el ta R 0.3 K/ W 301U(R) S eries (1600V to 2000V) T = 180°C J 0 100 200 300 400 500 1.5 K/ W 3 K/ W 600 40 20 60 80 100 120 140 160 180 Average Forward Current (A) Maximum Allowable Ambient T emperature (°C) Fig. 6 - Forward Power Loss Characteristics Maximum Average F orward Power L (W) oss 450 400 350 300 250 200 150 100 50 0 0 50 100 150 200 250 300 20 Conduction Angle 180° 120° 90° 60° 30° R Limit MS R th SA 0. 2 = 1 0. K/ W W K/ ta el -D 0. 3 K/ W R 0.7 K/ W 301U(R S ) eries (2500V) T = 180°C J 1.5 K / W 3 K/ W 40 60 80 100 120 140 160 180 Average Forward Current (A) Maximum Allowable Ambient T emperature (°C) Fig. 7 - Forward Power Loss Characteristics www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 93509 Revision: 23-Jun-08 301U(R) Series Standard Recovery Diodes Vishay High Power Products (Stud Version), 300 A Maximum Average F orward Power Los (W) s 600 500 400 300 DC 180° 120° 90° 60° 30° R th SA = 0. 1 K/ W 0. 2K /W 0.3 K/ W -D el ta R RMS Limit 200 100 0 Conduction Period 0.7 K/ W 301U(R S ) eries (2500V) T = 180°C J 1.5 K/ W 3 K/ W 0 100 200 300 400 500 40 20 60 80 100 120 140 160 180 Average Forward Current (A) Maximum Allowable Ambient T emperature (°C) Fig. 8 - Forward Power Loss Characteristics Peak Half S Wave F ine orward Current (A) Peak Half S Wave F ine orward Current (A) 8000 7000 6000 5000 4000 3000 2000 1 At Any Rated Load Condition And With Rated VRRM Applied Following S urge. Initial T = 180°C J @60 Hz 0.0083 s @50 Hz 0.0100 s 6000 At Any R ated Load Condition And With R ated VRRM Applied Following S urge. Initial T = 180°C J 5000 @60 Hz 0.0083 s @50 Hz 0.0100 s 4500 5500 4000 3500 3000 2500 2000 1500 1 10 100 Number Of Equa l Amplitude Half Cyc le Current Pulses (N) 301U(R) S eries (1600V to 2000V) 10 100 301U(R) S eries (2500V) Number Of Equa l Amplitude Half Cycle Current Pulses (N) Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 11 - Maximum Non-Repetitive Surge Current Peak Half S Wave F ine orward Current (A) 8000 7000 6000 5000 4000 3000 2000 Peak Half S Wave F ine orward Current (A) 9000 Maximum Non Repetitive S urge Current Versus Pulse T rain Duration. Initial T = 180 °C J No Voltage Reapplied Rated VRRM Reapplied 6000 Maximum Non Repetitive S urge Current Versus Pulse T rain Duration. Initial T = 180 °C J 5000 No Voltage Reapplied Rated VRRM Reapplied 4000 3000 2000 301U(R S ) eries (2500V) 1000 0.01 0.1 Pulse T rain Duration (s) 1 301U(R) S eries (1600V to 2000V) 0.1 Pulse T rain Duration (s) 1 1000 0.01 Fig. 10 - Maximum Non-Repetitive Surge Current Fig. 12 - Maximum Non-Repetitive Surge Current Document Number: 93509 Revision: 23-Jun-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 301U(R) Series Vishay High Power Products Standard Recovery Diodes (Stud Version), 300 A 10000 Ins tantaneous F orward Current (A) T = 25°C J T = 180°C J 10000 Ins tantaneous F orward Current (A) T = 25°C J T = 180°C J 1000 1000 100 301U(R S ) eries (1600V to 2000V) 10 0 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) 100 301U(R S ) eries (2500V) 10 0 0.5 1 1.5 2 2.5 3 3.5 Instantaneous Forward Voltage (V) Fig. 13 - Forward Voltage Drop Characteristics Fig. 14 - Forward Voltage Drop Characteristics T rans ient T hermal Impedance Z thJC (K/ W) 1 0.1 S teady S tate Value: RthJC = 0.14 K/ W (DC Operation) 0.01 301U(R S ) eries 0.001 0.001 0.01 0.1 S quare Wave Pulse Duration (s) 1 10 Fig. 15 - Thermal Impedance ZthJC Characteristic www.vishay.com 6 For technical questions, contact: ind-modules@vishay.com Document Number: 93509 Revision: 23-Jun-08 301U(R) Series Standard Recovery Diodes Vishay High Power Products (Stud Version), 300 A ORDERING INFORMATION TABLE Device code 30 1 1 2 1 2 - U 3 A 4 250 5 30 = Essential part number 1 = Standard device 3 = Top threaded version 5 = Type for rotating application with top threaded version 3/8 16UNC-2A 7 = Type for rotating application with flexible lead 9 = Type for rotating application with top threaded version 3/8 24UNF 3 - U = Stud normal polarity (cathode to stud) UR = Stud reverse polarity (anode to stud) A = Maximum leakage selection IRRM = 2 mA TJ = 25 °C Voltage code x 10 = VRRM (see Voltage Ratings table) 4 5 LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95337 Document Number: 93509 Revision: 23-Jun-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1