30CPQ150PBF

30CPQ150PbF Vishay High Power Products Schottky Rectifier, 2 x 15 A FEATURES Base common cathode 2 • 175 °C TJ operation • Center tap TO-247 package • Low forward voltage drop • High frequency operation Pb-free Available RoHS* COMPLIANT • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance 1 3 Anode Anode 2 1 2 Common cathode • Guard ring for enhanced ruggedness and long term reliability • Lead (Pb)-free (“PbF” suffix) • Designed and qualified for industrial level TO-247AC DESCRIPTION PRODUCT SUMMARY IF(AV) VR 2 x 15 A 150 V The 30CPQ150PbF center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 15 Apk, TJ = 125 °C (per leg) CHARACTERISTICS Rectangular waveform VALUES 30 150 1000 0.78 - 55 to 175 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 30CPQ150PbF 150 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per device per leg IF(AV) 50 % duty cycle at TC = 135 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied SYMBOL TEST CONDITIONS VALUES 30 15 A 1000 340 11.25 0.50 mJ A UNITS Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg TJ = 25 °C, IAS = 0.50 A, L = 90 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94186 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 30CPQ150PbF Vishay High Power Products Schottky Rectifier, 2 x 15 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 15 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 30 A 15 A 30 A Maximum reverse leakage current per leg See fig. 2 Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C VALUES 1.00 1.19 0.78 0.93 0.1 15 340 7.5 10 000 mA pF nH V/µs V UNITS TJ = 125 °C VR = Rated VR VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured lead to lead 5 mm from package body Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style TO-247AC (JEDEC) SYMBOL TJ, TStg DC operation See fig. 4 DC operation RthCS Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 175 2.20 1.10 0.24 6 0.21 6 (5) 12 (10) g oz. kgf ⋅ cm (lbf ⋅ in) °C/W UNITS °C RthJC Mounting torque Marking device 30CPQ150 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94186 Revision: 13-Aug-08 30CPQ150PbF Schottky Rectifier, 2 x 15 A Vishay High Power Products IF - Instantaneous Forward Current (A) 1000 100 TJ = 175 °C IR - Reverse Current (mA) 10 TJ = 150 °C TJ = 125 °C TJ = 100 °C 100 1 TJ = 175 °C TJ = 125 °C TJ = 25 °C 10 0.1 0.01 0.001 TJ = 75 °C TJ = 50 °C TJ = 25 °C 1 0.0001 0 0.5 1.0 1.5 2.0 2.5 3.0 0 25 50 75 100 125 150 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) 1000 CT - Junction Capacitance (pF) TJ = 25 °C 100 10 0 30 60 90 120 150 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 t1 t2 0.01 Single pulse (thermal resistance) Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 1 10 100 0.001 0.00001 0.0001 0.001 0.01 0.1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94186 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 30CPQ150PbF Vishay High Power Products Schottky Rectifier, 2 x 15 A 180 16 Allowable Case Temperature (°C) Average Power Loss (W) 160 DC 12 D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 RMS limit 140 8 Square wave (D = 0.50) 80 % Rated VR applied 120 DC See note (1) 4 100 0 0 5 10 15 20 25 0 5 10 15 20 25 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94186 Revision: 13-Aug-08 30CPQ150PbF Schottky Rectifier, 2 x 15 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 30 1 1 2 3 4 5 6 - C 2 P 3 Q 4 150 PbF 5 6 Current rating (30 = 30 A) Circuit configuration: C = Common cathode Package: P = TO-247 Schottky “Q” series Voltage code (150 = 150 V) None = Standard production PbF = Lead (Pb)-free Tube standard pack quantity: 25 pieces LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95223 http://www.vishay.com/doc?95226 Document Number: 94186 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1