30CTQ...PbF Series
Vishay High Power Products
Schottky Rectifier, 2 x 15 A
FEATURES
Base 2 common cathode
• • • •
150 °C TJ operation Center tap configuration Very low forward voltage drop High frequency operation
Pb-free Available
RoHS*
COMPLIANT
• High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance
TO-220AB
Anode Anode 2 1 Common 3 cathode
• Guard ring for enhanced ruggedness and long term reliability • Lead (Pb)-free (“PbF” suffix) • Designed and qualified for industrial level
DESCRIPTION PRODUCT SUMMARY
IF(AV) VR 2 x 15 A 50/60 V
This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 15 Apk, TJ = 125 °C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 30 50/60 1000 0.56 - 55 to 150 UNITS A V A V °C
VOLTAGE RATINGS
PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 30CTQ050PbF 50 30CTQ060PbF 60 UNITS V
ABSOLUTE MAXIMUM RATINGS
PARAMETER Maximum average forward current See fig. 5 per device IF(AV) per leg 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 105 °C, rectangular waveform 15 A 1000 260 13 1.50 mJ A SYMBOL TEST CONDITIONS VALUES 30 UNITS
Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg
TJ = 25 °C, IAS = 1.50 A, L = 11.5 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical
* Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94189 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1
30CTQ...PbF Series
Vishay High Power Products Schottky Rectifier, 2 x 15 A
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL 15 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 30 A 15 A 30 A Maximum reverse leakage current per leg See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured lead to lead 5 mm from package body Rated VR TEST CONDITIONS TJ = 25 °C VALUES 0.62 0.82 0.56 0.71 0.80 45 0.39 8.47 720 8.0 10 000 mA V mΩ pF nH V/µs V UNITS
TJ = 125 °C VR = Rated VR
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style TO-220AB SYMBOL TJ, TStg TEST CONDITIONS VALUES - 55 to 150 3.25 RthJC DC operation 1.63 RthCS Mounting surface, smooth and greased 0.50 2 0.07 6 (5) 12 (10) g oz. kgf · cm (lbf · in) °C/W UNITS °C
Mounting torque
Marking device
30CTQ050 30CTQ060
www.vishay.com 2
For technical questions, contact: diodes-tech@vishay.com
Document Number: 94189 Revision: 13-Aug-08
30CTQ...PbF Series
Schottky Rectifier, 2 x 15 A Vishay High Power Products
IF - Instantaneous Forward Current (A)
1000
1000
IR - Reverse Current (mA)
100 10 1 0.1 0.01 0.001
TJ = 150 °C TJ = 125 °C TJ = 100 °C
100
10
TJ = 75 °C TJ = 50 °C TJ = 25 °C
TJ = 150 °C TJ = 125 °C TJ = 25 °C
1 0 0.4 0.8 1.2 1.6 2.0
0
10
20
30
40
50
60
VFM - Forward Voltage Drop (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg)
VR - Reverse Voltage (V)
Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg)
1000
CT - Junction Capacitance (pF)
TJ = 25 °C
100 0 10 20 30 40 50 60
VR - Reverse Voltage (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
ZthJC - Thermal Impedance (°C/W)
10
1
0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
PDM t1 t2
0.01 Single pulse (thermal resistance) 0.001 0.00001 0.0001 0.001
Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100
0.01
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 94189 Revision: 13-Aug-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 3
30CTQ...PbF Series
Vishay High Power Products Schottky Rectifier, 2 x 15 A
160 14
Allowable Case Temperature (°C)
150 140 130 120 110 100 90 80 See note (1) 70 60 0 5 10 15 20 25 Square wave (D = 0.50) 80 % rated VR applied DC
Average Power Loss (W)
12 10 8 6 4 2 0 0
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75
RMS limit
DC
5
10
15
20
25
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg)
IF(AV) - Average Forward Current (A)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
IFSM - Non-Repetitive Surge Current (A)
1000
At any rated load condition and with rated VRRM applied following surge
100 10 100 1000 10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V
D.U.T.
IRFP460 Rg = 25 Ω
Current monitor
Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V
(1)
www.vishay.com 4
For technical questions, contact: diodes-tech@vishay.com
Document Number: 94189 Revision: 13-Aug-08
30CTQ...PbF Series
Schottky Rectifier, 2 x 15 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
30
1 1 2 3 4 5 6 -
C
2
T
3
Q
4
060 PbF
5 6
Current rating (30 = 30 A) Circuit configuration: C = Common cathode
-
Package T = TO-220
-
Schottky “Q” series Voltage ratings None = Standard production PbF = Lead (Pb)-free 050 = 50 V 060 = 60 V
-
Tube standard pack quantity: 50 pieces
LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95222 http://www.vishay.com/doc?95225
Document Number: 94189 Revision: 13-Aug-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 5
Outline Dimensions
Vishay Semiconductors
TO-220AB
DIMENSIONS in millimeters and inches
(6) E E2 Q (6) (7) D2 (6) (6) D D1 1 2 3 C E1 (6) L Base metal View A - A c 2x e e1 0.015 M B A M Lead assignments Lead tip Diodes 1. - Anode/open 2. - Cathode 3. - Anode A2 A b1, b3 (4) c (b, b2) Plating c1 (4) Detail B H1 (H1) C (7) A ØP 0.014 M B A M A B Seating plane A A1 1 D C 23 D L1 (2)
Thermal pad (E)
3xb
3 x b2
Detail B
Section C - C and D - D
Conforms to JEDEC outline TO-220AB
SYMBOL
A A1 A2 b b1 4 b2 b3 4 c c1 4 D 3 D1 D2 6 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3 and c1 apply to base metal only (5) Controlling dimensions: inches (6) Thermal pad contour optional within dimensions E, H1, D2 and E1 Document Number: 95222 Revision: 08-Mar-11
MILLIMETERS MIN. MAX. 4.25 4.65 1.14 1.40 2.56 2.92 0.69 1.01 0.38 0.97 1.20 1.73 1.14 1.73 0.36 0.61 0.36 0.56 14.85 15.25 8.38 9.02 11.68 12.88
INCHES MIN. MAX. 0.167 0.183 0.045 0.055 0.101 0.115 0.027 0.040 0.015 0.038 0.047 0.068 0.045 0.068 0.014 0.024 0.014 0.022 0.585 0.600 0.330 0.355 0.460 0.507
NOTES
SYMBOL E E1 E2 e e1 H1 L L1 ØP Q
MILLIMETERS MIN. MAX. 10.11 10.51 6.86 8.89 0.76 2.41 2.67 4.88 5.28 6.09 6.48 13.52 14.02 3.32 3.82 3.54 3.73 2.60 3.00 90° to 93°
INCHES MIN. MAX. 0.398 0.414 0.270 0.350 0.030 0.095 0.105 0.192 0.208 0.240 0.255 0.532 0.552 0.131 0.150 0.139 0.147 0.102 0.118 90° to 93°
NOTES 3, 6 6 7
6, 7 2
(7) (8)
Dimensions E2 x H1 define a zone where stamping and singulation irregularities are allowed Outline conforms to JEDEC TO-220, except A2 (maximum) and D2 (minimum) where dimensions are derived from the actual package outline
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 1
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1
