30CTQ100-N3

VS-30CTQ...PbF Series, VS-30CTQ...-N3 Series www.vishay.com Vishay Semiconductors Schottky Rectifier, 2 x 15 A Base 2 common cathode FEATURES • 175 °C TJ operation • Low forward voltage drop • High frequency operation • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Compliant to RoHS Directive 2002/95/EC • Designed and qualified according to JEDEC-JESD47 Anode TO-220AB Anode 2 1 Common 3 cathode PRODUCT SUMMARY Package IF(AV) VR VF at IF IRM max. TJ max. Diode variation EAS TO-220AB 2 x 15 A 80 V, 100 V 0.67 V 7.0 mA at 125 °C 175 °C Common cathode 7.50 mJ • Halogen-free according to IEC 61249-2-21 definition (-N3 only) DESCRIPTION The center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 15 Apk, TJ = 125 °C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 30 80/100 850 0.67 - 55 to 175 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS30CTQ080PbF 80 VS30CTQ080-N3 80 VS30CTQ100PbF 100 VS30CTQ100-N3 100 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per device IF(AV) per leg 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 0.50 A, L = 60 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 129 °C, rectangular waveform 15 850 A 275 7.50 0.50 mJ A SYMBOL TEST CONDITIONS VALUES 30 A UNITS Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg Revision: 26-Aug-11 Document Number: 94192 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30CTQ...PbF Series, VS-30CTQ...-N3 Series www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 15 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 30 A 15 A 30 A Maximum reverse leakage current per leg See fig. 2 Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C TJ = 125 °C VR = Rated VR VALUES 0.86 1.05 0.67 0.82 0.55 7.0 500 8.0 10 000 mA pF nH V/μs V UNITS VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured lead to lead 5 mm from package body Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style TO-220AB SYMBOL TJ, TStg TEST CONDITIONS VALUES - 55 to 175 3.25 RthJC DC operation 1.63 RthCS Mounting surface, smooth and greased 0.50 2 0.07 6 (5) 12 (10) g oz. kgf · cm (lbf · in) °C/W UNITS °C Mounting torque Marking device 30CTQ080 30CTQ100 Revision: 26-Aug-11 Document Number: 94192 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30CTQ...PbF Series, VS-30CTQ...-N3 Series www.vishay.com Vishay Semiconductors 100 TJ = 175 °C IF - Instantaneous Forward Current (A) 1000 IR - Reverse Current (mA) 10 1 0.1 TJ = 150 °C TJ = 125 °C TJ = 100 °C TJ = 75 °C 100 10 TJ = 175 °C TJ = 125 °C TJ = 25 °C 0.01 0.001 0.0001 TJ = 50 °C TJ = 25 °C 0 20 40 60 80 100 1 0 0.5 1.0 1.5 2.0 2.5 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) 1000 CT - Junction Capacitance (pF) TJ = 25 °C 100 0 20 40 60 80 100 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Single pulse (thermal resistance) 0.1 PDM t1 t2 0.01 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 10 0.001 0.00001 . 100 0.0001 0.001 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Revision: 26-Aug-11 Document Number: 94192 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30CTQ...PbF Series, VS-30CTQ...-N3 Series www.vishay.com Vishay Semiconductors 7 180 Allowable Case Temperature (°C) 160 150 140 130 120 110 100 0 2 4 6 8 See note (1) Square wave (D = 0.50) 80 % rated VR applied DC Average Power Loss (W) 170 6 5 4 3 2 1 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit DC 10 12 14 0 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V Revision: 26-Aug-11 Document Number: 94192 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-30CTQ...PbF Series, VS-30CTQ...-N3 Series www.vishay.com ORDERING INFORMATION TABLE Vishay Semiconductors Device code VS1 1 2 3 4 5 6 7 - 30 2 C 3 T 4 Q 5 100 PbF 6 7 Vishay Semiconductors product Current rating (30 = 30 A) Circuit configuration: C = Common cathode Package: T = TO-220 - Schottky “Q” series Voltage ratings Environmental digit PbF = Lead (Pb)-free and RoHS compliant -N3 = Halogen-free, RoHS compliant, and totally lead (Pb)-free 080 = 80 V 100 = 100 V ORDERING INFORMATION (Example) PREFERRED P/N VS-30CTQ080PbF VS-30CTQ080-N3 VS-30CTQ100-N3 VS-30CTQ100-N3 QUANTITY PER T/R 50 50 50 50 MINIMUM ORDER QUANTITY 1000 1000 1000 1000 PACKAGING DESCRIPTION Antistatic plastic tube Antistatic plastic tube Antistatic plastic tube Antistatic plastic tube LINKS TO RELATED DOCUMENTS Dimensions Part marking information TO-220AB PbF TO-220AB -N3 www.vishay.com/doc?95222 www.vishay.com/doc?95225 www.vishay.com/doc?95028 Revision: 26-Aug-11 Document Number: 94192 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors TO-220AB DIMENSIONS in millimeters and inches (6) E E2 Q (6) (7) D2 (6) (6) D D1 1 2 3 C E1 (6) L Base metal View A - A c 2x e e1 0.015 M B A M Lead assignments Lead tip Diodes 1. - Anode/open 2. - Cathode 3. - Anode A2 A b1, b3 (4) c (b, b2) Plating c1 (4) Detail B H1 (H1) C (7) A ØP 0.014 M B A M A B Seating plane A A1 1 D C 23 D L1 (2) Thermal pad (E) 3xb 3 x b2 Detail B Section C - C and D - D Conforms to JEDEC outline TO-220AB SYMBOL A A1 A2 b b1 4 b2 b3 4 c c1 4 D 3 D1 D2 6 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3 and c1 apply to base metal only (5) Controlling dimensions: inches (6) Thermal pad contour optional within dimensions E, H1, D2 and E1 Document Number: 95222 Revision: 08-Mar-11 MILLIMETERS MIN. MAX. 4.25 4.65 1.14 1.40 2.56 2.92 0.69 1.01 0.38 0.97 1.20 1.73 1.14 1.73 0.36 0.61 0.36 0.56 14.85 15.25 8.38 9.02 11.68 12.88 INCHES MIN. MAX. 0.167 0.183 0.045 0.055 0.101 0.115 0.027 0.040 0.015 0.038 0.047 0.068 0.045 0.068 0.014 0.024 0.014 0.022 0.585 0.600 0.330 0.355 0.460 0.507 NOTES SYMBOL E E1 E2 e e1 H1 L L1 ØP Q  MILLIMETERS MIN. MAX. 10.11 10.51 6.86 8.89 0.76 2.41 2.67 4.88 5.28 6.09 6.48 13.52 14.02 3.32 3.82 3.54 3.73 2.60 3.00 90° to 93° INCHES MIN. MAX. 0.398 0.414 0.270 0.350 0.030 0.095 0.105 0.192 0.208 0.240 0.255 0.532 0.552 0.131 0.150 0.139 0.147 0.102 0.118 90° to 93° NOTES 3, 6 6 7 6, 7 2 (7) (8) Dimensions E2 x H1 define a zone where stamping and singulation irregularities are allowed Outline conforms to JEDEC TO-220, except A2 (maximum) and D2 (minimum) where dimensions are derived from the actual package outline For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000