315S-50

Series 315 Vishay Dale Printed Circuit Dip Solder Connector FEATURES • Polarization guide components are interchangeable between plug and receptacle. Each may be orientated in any of 6 positions to provide selective keying. A total of 144 keying variations are possible. • Right angle dip solder terminals, straight through available on request • Holes provided for threaded mounting studs MATERIAL SPECIFICATIONS Contact Pin: Dip solder phosphor bronze Contact Pin-Solder Cup: Brass Contact Socket: Phosphor bronze (closed entry) Contact Plating: Gold Guides: Stainless steel, passivated Nut: Aluminum, anodized Standard Body: Glass-filled diallyl phthalate per MIL-P-19833, type GDI-30F, green. Other materials available upon request • Female contacts float to aid in alignment and resist vibration • Closed entry female contacts prevent insertion of oversize probes • Meets applicable paragraphs of MIL-C-8384 APPLICATIONS Designed for printed circuit applications requiring 50 contacts. ELECTRICAL SPECIFICATIONS Current Rating: 7.5 A Breakdown Voltage: At sea level: 2500 VRMS At 70 000 feet: 600 VRMS PHYSICAL SPECIFICATIONS Number of Contacts: 50 Contact Spacing: 0.200", staggered rows provide a 0.100" grid Contact Gauge: #20 AWG Minimum Creepage Path between Contacts: 0.11" Minimum Air Space between Contacts: 0.06" DIMENSIONS in inches (millimeters) 0.135 [3.43] 0.250 MAX., [6.35] (TYP.) 0.130 MIN., [3.30] (TYP.) SECTION A-A 0.460 [11.7] 0.230 [5.84] 0.109 [2.77] (TYP.) 0.200 HEX. [5.08] (TYP.) 0.400 [10.2] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.20 [5.08] 0.120 DIA. HOLE [3.05] (TYP.) SECTION B-B 0.042 [1.07] (TYP.) 0.460 [11.7] 0.230 [5.84] 4 34 1 1 18 18 35 35 2 2 19 19 36 36 20 21 1.850 [47.0] 37 2.100 [53.3] (CONTACTS 34 THRU 50) (CONTACTS 18 THRU 33) (CONTACTS 1 THRU 17) 3 3 20 1.850 [47.0] 37 4 4 21 39 6 0.100 [2.54] (TYP.) 0.200 [5.08] (TYP.) 38 38 5 5 22 22 39 6 23 23 40 40 7 7 24 24 41 41 8 8 42 3.700 [94.0] 0.200 [5.08] (TYP.) 0.100 [2.54] (TYP.) 4.200 [107] A 4.500 [114] A 4.100 [104] B B 3.700 [94.0] 25 25 42 9 9 26 26 43 10 43 10 27 27 44 11 44 11 28 28 45 12 45 12 29 29 46 13 46 13 30 30 47 14 47 14 31 31 48 15 48 15 32 32 9 49 16 16 17 33 0.040 ± 0.001 DIA., [1.020 ± 0.025] (TYP.) 0.19 [4.83] (TYP.) 0.360 [9.14] 0.25 [6.35] (TYP.) 4-40 UNC 2A (TYP.) 50 17 50 3 0.100 [2.54] 0.200 [5.08] 4-40 UNC 2A (TYP.) 0.25 [6.35] (TYP.) 0.360 [9.14] 0.19 [4.83] (TYP.) 0.180 [4.57] 0.100 [2.54] 0.200 [5.08] 315 PR-50 TYPE 315 S-50 TYPE www.vishay.com 1 For technical questions, contact: connectors@vishay.com Document Number: 36025 Revision: 21-Mar-07 Series 315 Vishay Dale Printed Circuit Dip Solder Connector ORDERING INFORMATION 315 MODEL PR CONTACTS PR = Pin with right angle dip solder terminals S = Socket -50 NUMBER OF CONTACTS www.vishay.com 2 For technical questions, contact: connectors@vishay.com Document Number: 36025 Revision: 21-Mar-07 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1