32CTQ030STRR

32CTQ...S/32CTQ...-1 Vishay High Power Products Schottky Rectifier, 2 x 15 A 32CTQ...S 32CTQ...-1 FEATURES • 150 °C TJ operation • Low forward voltage drop • High frequency operation • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Designed and qualified for Q101 level Base common cathode 2 Base common cathode 2 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode DESCRIPTION The 32CTQ... Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. D2PAK TO-262 PRODUCT SUMMARY IF(AV) VR 2 x 15 A 25/30 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 15 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform VALUES 30 25/30 900 0.40 - 55 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 32CTQ025S 32CTQ025-1 25 32CTQ030S 32CTQ030-1 30 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 Maximum peak one cycle non-repetitive surge current See fig. 7 Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) TEST CONDITIONS 50 % duty cycle at TC = 115 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied VALUES 30 900 250 13 3 mJ A A UNITS TJ = 25 °C, IAS = 1.20 A, L = 11.10 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 93961 Revision: 21-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 32CTQ...S/32CTQ...-1 Vishay High Power Products Schottky Rectifier, 2 x 15 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 15 A Maximum forward voltage drop See fig. 1 VFM (1) 30 A 15 A 30 A Maximum reverse leakage current See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured lead to lead 5 mm from package body Rated VR TEST CONDITIONS TJ = 25 °C VALUES 0.49 0.58 0.40 0.53 1.75 97 0.233 9.09 1300 8.0 10 000 mA V mΩ pF nH V/µs V UNITS TJ = 125 °C VR = Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style D2PAK Marking device Case style TO-262 SYMBOL TJ, TStg RthJC RthCS DC operation See fig. 4 Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 150 3.25 °C/W 0.50 2 0.07 6 (5) 12 (10) g oz. kgf ⋅ cm (lbf ⋅ in) UNITS °C Mounting torque 32CTQ025S 32CTQ030S 32CTQ025-1 32CTQ030-1 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93961 Revision: 21-Aug-08 32CTQ...S/32CTQ...-1 Schottky Rectifier, 2 x 15 A Vishay High Power Products IF - Instantaneous Forward Current (A) 1000 1000 IR - Reverse Current (mA) 100 10 TJ = 150 °C TJ = 125 °C TJ = 100 °C 100 1 0.1 0.01 0.001 TJ = 75 °C TJ = 50 °C TJ = 25 °C 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VFM - Forward Voltage Drop (V) 0 5 10 15 20 25 30 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Fig. 1 - Maximum Forward Voltage Drop Characteristics 10 000 CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 0 5 10 15 20 25 30 35 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 t1 t2 0.01 Single pulse (thermal resistance) Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93961 Revision: 21-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 32CTQ...S/32CTQ...-1 Vishay High Power Products Schottky Rectifier, 2 x 15 A 160 Allowable Case Temperature (°C) 10 Average Power Loss (W) 150 140 130 120 110 100 90 8 DC D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMS limit 6 Square wave (D = 0.50) 80 % rated VR applied 4 2 See note (1) 80 0 0 5 10 15 20 25 0 5 10 15 20 25 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93961 Revision: 21-Aug-08 32CTQ...S/32CTQ...-1 Schottky Rectifier, 2 x 15 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 32 1 1 2 3 4 5 6 7 - C 2 T 3 Q 4 030 5 S 6 TRL 7 8 Current rating (30 A) Circuit configuration: C = Common cathode T = TO-220 Schottky “Q” series Voltage rating S = D2PAK -1 = TO-262 025 = 25 V 030 = 30 V - None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95014 http://www.vishay.com/doc?95008 http://www.vishay.com/doc?95032 Document Number: 93961 Revision: 21-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1