3KASMC12A

New Product 3KASMC10 thru 3KASMC43A Vishay General Semiconductor Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Patented PAR® construction • Available in uni-directional polarity only • 3000 W peak pulse power capability with a 10/1000 µs waveform • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: DO-214AB (SMC) Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end Pa te ten d* * Patent #'s 4,980,315 5,166,769 5,278,094 DO-214AB (SMC) PRIMARY CHARACTERISTICS VWM PPPM PD IFSM TJ max. 10 V to 43 V 3000 W 6.0 W 200 A 185 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 µs waveform (1) (Fig. SYMBOL 3) PPPM IPPM IFSM PD VF TJ, TSTG VALUE 3000 See next table 200 6.0 3.5 - 65 to + 185 UNIT W A A W V °C Peak power pulse current with a 10/1000 µs waveform (1) (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave Maximum instantaneous forward voltage at 100 A (2) Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Power dissipation on infinite heatsink at TL = 75 °C (Fig. 6) (2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum Document Number: 88480 Revision: 21-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product 3KASMC10 thru 3KASMC43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR (1) AT IT (V) MIN. 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 MAX. 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 58.4 52.8 TEST CURRENT IT (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 STAND-OFF VOLTAGE VWM (V) 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 MAXIMUM REVERSE LEAKAGE AT VWM IR (µA) 5.0 5.0 5.0 5.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 TJ = 150 °C MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) 50 50 50 50 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 20 20 20 20 20 20 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) 160 177 149 165 136 151 126 140 116 129 112 123 104 115 98.4 109 93.2 103 83.8 92.6 76.1 84.5 69.8 77.1 64.4 71.3 60.0 66.1 56.1 62.0 50.8 56.3 46.7 51.6 42.0 46.5 39.1 43.2 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 DEVICE TYPE 3KASMC10 3KASMC10A 3KASMC11 3KASMC11A 3KASMC12 3KASMC12A 3KASMC13 3KASMC13A 3KASMC14 3KASMC14A 3KASMC15 3KASMC15A 3KASMC16 3KASMC16A 3KASMC17 3KASMC17A 3KASMC18 3KASMC18A 3KASMC20 3KASMC20A 3KASMC22 3KASMC22A 3KASMC24 3KASMC24A 3KASMC26 3KASMC26A 3KASMC28 3KASMC28A 3KASMC30 3KASMC30A 3KASMC33 3KASMC33A 3KASMC36 3KASMC36A 3KASMC40 3KASMC40A 3KASMC43 3KASMC43A Notes: 3AW 3AX 3AY 3AZ 3BD 3BE 3BF 3BG 3BH 3BK 3BL 3BM 3BN 3BP 3BQ 3BR 3BS 3BT 3BU 3BV 3BW 3BX 3BY 3BZ 3CD 3CE 3CF 3CG 3CH 3CK 3CL 3CM 3CN 3CP 3CQ 3CR 3CS 3CT (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88480 Revision: 21-Oct-08 New Product 3KASMC10 thru 3KASMC43A Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Thermal resistance, junction to ambient air Thermal resistance, junction to leads Note: (1) Mounted on minimum recommended pad layout (1) SYMBOL RθJA RθJL VALUE 77.5 18.3 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N 3KASMC10AHE3/57T (1) 3KASMC10AHE3/9AT (1) Note: (1) Automotive grade AEC Q101 qualified UNIT WEIGHT (g) 0.211 0.211 PREFERRED PACKAGE CODE 57T 9AT BASE QUANTITY 850 3500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 150 IPPM - Peak Pulse Current, % IRSM tr = 10 µs Peak Value IPPM PPPM - Peak Power (kW) TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM 10 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 1 0.1 0.1 1 10 100 1000 10000 td - Pulse Width (µs) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 100 10 000 75 50 CJ - Junction Capacitance (pF) Measured at Zero Bias 1000 Measured at Stand-Off Voltage TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 10 20 30 40 50 25 0 0 50 100 150 200 TJ - Initial Temperature (°C) VWM - Reverse Stand-off Voltage (V) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 4. Typical Junction Capacitance Document Number: 88480 Revision: 21-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product 3KASMC10 thru 3KASMC43A Vishay General Semiconductor 200 6 TJ = TJ max. 8.3 ms Single Half Sine-Wave Peak Forward Surge Current (A) 100 PD - Power Dissipation (W) 5 60 Hz Resistive or Inductive Load 4 3 2 1 0 50 10 1 5 10 50 100 0 25 50 75 100 125 150 175 200 Number of Cycles at 60 Hz TL - Lead Temperature (°C) Figure 5. Maximum Non-Repetitive/Peak Forward Surge Current Figure 6. Power Derating Curve PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AB (SMC) Cathode Band 0.185 (4.69) MAX. Mounting Pad Layout 0.126 (3.20) 0.114 (2.90) 0.246 (6.22) 0.220 (5.59) 0.126 (3.20) MIN. 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) MIN. 0.320 REF. 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88480 Revision: 21-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1