40EPF10

40EPF..PbF Soft Recovery Series Vishay High Power Products Fast Soft Recovery Rectifier Diode, 40 A Base common cathode 2 FEATURES/DESCRIPTION The 40EPF..PbF fast soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. Pb-free Available RoHS* COMPLIANT The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. TO-247AC modified 1 Cathode 3 Anode This product series has been designed and qualified for industrial level and lead (Pb)-free. PRODUCT SUMMARY VF at 20 A trr VRRM < 1.25 V 95 ns 1000/1200 V APPLICATIONS • Output rectification and choppers and converters freewheeling in inverters, • Input rectifications where severe restrictions on conducted EMI should be met MAJOR RATINGS AND CHARACTERISTICS SYMBOL VRRM IF(AV) IFSM trr VF TJ 1 A, 100 A/µs 20 A, TJ = 25 °C Sinusoidal waveform CHARACTERISTICS VALUES 1000/1200 40 475 95 1.25 - 40 to 150 UNITS V A ns V °C VOLTAGE RATINGS PART NUMBER 40EPF10PbF 40EPF12PbF VRRM, MAXIMUM PEAK REVERSE VOLTAGE V 1000 1200 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 1100 1300 IRRM AT 150 °C mA 10 ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current Maximum I2t for fusing Maximum I2√t for fusing SYMBOL IF(AV) IFSM I2t I2√t TEST CONDITIONS TC = 105 °C, 180° conduction half sine wave 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied t = 0.1 to 10 ms, no voltage reapplied VALUES 40 400 475 800 1131 11 310 A2 s A 2 √s A UNITS * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94103 Revision: 08-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 40EPF..PbF Soft Recovery Series Vishay High Power Products ELECTRICAL SPECIFICATIONS PARAMETER Maximum forward voltage drop Forward slope resistance Threshold voltage Maximum reverse leakage current SYMBOL VFM rt VF(TO) IRM TEST CONDITIONS 40 A, TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 150 °C VALUES 1.4 6.82 0.94 VR = Rated VRRM 0.1 10 UNITS V mΩ V mA Fast Soft Recovery Rectifier Diode, 40 A RECOVERY CHARACTERISTICS PARAMETER Reverse recovery time Reverse recovery current Reverse recovery charge Snap factor SYMBOL trr Irr Qrr S TEST CONDITIONS IF at 10 Apk 25 A/µs 25 °C VALUES 450 6 1.8 0.5 UNITS ns A µC dir dt Qrr IRM(REC) IFM trr t THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, junction to ambient Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style TO-247AC modified (JEDEC) SYMBOL TJ, TStg RthJC RthJA RthCS Mounting surface, smooth and greased DC operation TEST CONDITIONS VALUES - 40 to 150 0.6 40 0.2 6 0.21 6 (5) 12 (10) 40EPF10 40EPF12 g oz. kgf · cm (Ibf · in) °C/W UNITS °C Mounting torque Marking device www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94103 Revision: 08-Jul-08 40EPF..PbF Soft Recovery Series Fast Soft Recovery Rectifier Diode, 40 A 150 90 40EPF.. Series RthJC (DC) = 0.6 °C/W Vishay High Power Products 130 120 110 100 90 80 70 60 0 5 10 15 20 25 30 35 40 45 Ø Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) 140 80 70 60 50 40 DC 180° 120° 90° 60° 30° 30° 60° 90° 120° 180° RMS limit 30 20 10 0 0 10 20 30 40 50 60 70 40EPF.. Series TJ = 150 °C Ø Conduction period Conduction angle Average Forward Current (A) Fig. 1 - Current Rating Characteristics Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 150 450 40EPF.. Series RthJC (DC) = 0.6 °C/W 400 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s Maximum Allowable Case Temperature (°C) 140 130 120 110 100 Peak Half Sine Wave Forward Current (A) 350 300 250 200 150 100 40EPF.. Series Ø Conduction period 30° 90 80 60° 90° 120° 180° DC 70 60 0 10 20 30 40 50 60 70 1 10 100 Average Forward Current (A) Fig. 2 - Current Rating Characteristics Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 70 500 180° 120° 90° 60° 30° RMS limit 450 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied Maximum Average Forward Power Loss (W) 60 50 40 30 Peak Half Sine Wave Forward Current (A) 400 350 300 250 200 150 100 0.01 40EPF.. Series Ø 20 10 0 0 5 10 15 20 25 Conduction angle 40EPF.. Series TJ = 150 °C 30 35 40 45 0.1 1 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Document Number: 94103 Revision: 08-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 40EPF..PbF Soft Recovery Series Vishay High Power Products Fast Soft Recovery Rectifier Diode, 40 A Instantaneous Forward Current (A) 1000 100 10 TJ = 25 °C TJ = 150 °C 40EPF.. Series 1 0 1 2 3 4 5 6 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 0.7 0.6 40EPF.. Series TJ = 25 °C 6 5 4 3 IFM = 10 A 2 IFM = 5 A 1 0 0 40 80 120 160 200 0 40 80 120 160 200 IFM = 1 A 40EPF.. Series TJ = 25 °C IFM = 40 A 0.5 0.4 IFM = 40 A 0.3 0.2 0.1 0 IFM = 10 A IFM = 5 A IFM = 1 A IFM = 30 A Qrr - Maximum Reverse Recovery Charge (µC) trr - Maximum Reverse Recovery Time (µs) IFM = 30 A dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25 °C dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 10 - Recovery Charge Characteristics, TJ = 25 °C 2.0 40EPF.. Series TJ = 150 °C 20 40EPF.. Series TJ = 150 °C IFM = 60 A trr - Maximum Reverse Recovery Time (µs) 1.6 IFM = 60 A IFM = 40 A IFM = 20 A IFM = 10 A IFM = 5 A IFM = 1 A Qrr - Maximum Reverse Recovery Charge (µC) 16 IFM = 40 A 12 IFM = 20 A 8 IFM = 10 A IFM = 5 A IFM = 1 A 1.2 0.8 0.4 4 0 0 40 80 120 160 200 0 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 9 - Recovery Time Characteristics, TJ = 150 °C dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 11 - Recovery Charge Characteristics, TJ = 150 °C www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94103 Revision: 08-Jul-08 40EPF..PbF Soft Recovery Series Fast Soft Recovery Rectifier Diode, 40 A 30 25 20 15 10 5 0 0 40 80 120 160 200 40EPF.. Series TJ = 25 °C IFM = 40 A IFM = 30 A 50 40EPF.. Series TJ = 150 °C IFM = 60 A IFM = 40 A 30 IFM = 20 A IFM = 10 A IFM = 5 A 10 IFM = 1 A 0 0 40 80 120 160 200 Vishay High Power Products Irr - Maximum Reverse Recovery Current (A) IFM = 10 A IFM = 5 A IFM = 1 A Irr - Maximum Reverse Recovery Current (A) 40 20 dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25 °C dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 13 - Recovery Current Characteristics, TJ = 150 °C ZthJC - Transient Thermal Impedance (°C/W) 1 Steady state value (DC operation) Single pulse D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 40EPF.. Series 0.1 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics Document Number: 94103 Revision: 08-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 40EPF..PbF Soft Recovery Series Vishay High Power Products ORDERING INFORMATION TABLE Fast Soft Recovery Rectifier Diode, 40 A Device code 40 1 1 2 3 4 5 6 - E 2 P 3 F 4 12 5 PbF 6 Current rating (40 = 40 A) Circuit configuration: E = Single diode Package: P = TO-247AC modified Type of silicon: F = Fast diode Voltage code x 100 = VRRM None = Standard production PbF = Lead (Pb)-free 10 = 1000 V 12 = 1200 V - LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95223 http://www.vishay.com/doc?95226 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 94103 Revision: 08-Jul-08 Outline Dimensions www.vishay.com DIMENSIONS in millimeters and inches (3) B (2) R/2 Q 2xR (2) 1 (5) L1 C L See view B 2 x b2 3xb 0.10 M C A M 2x e b4 A1 C A (4) E1 0.01 M D B M View A - A 2 3 E N S A2 A D2 A (6) Ø P Ø K M DBM A (Datum B) FP1 Vishay Semiconductors D D Thermal pad 4 D1 (4) Planting (b1, b3, b5) Base metal D DE E C C Lead assignments Diodes 1. - Anode/open 2. - Cathode 3. - Anode (c) c1 (b, b2, b4) (4) Section C - C, D - D, E - E View B SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.50 2.49 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.37 2.59 3.43 2.59 3.38 0.38 0.86 0.38 0.76 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.059 0.098 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.094 0.102 0.135 0.102 0.133 0.015 0.034 0.015 0.030 0.776 0.815 0.515 - NOTES SYMBOL D2 E E1 e FK L L1 N P P1 Q R S 3 4 MILLIMETERS MIN. MAX. 0.51 1.30 15.29 15.87 13.72 5.46 BSC 2.54 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 6.98 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.051 0.602 0.625 0.540 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.275 0.209 0.224 1.78 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC outline TO-247 with exception of dimension c Revision: 16-Jun-11 Document Number: 95223 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1