42CTQ030-1PBF

VS-42CTQ030SPbF, VS-42CTQ030-1PbF Vishay High Power Products Schottky Rectifier, 2 x 20 A VS-42CTQ030SPbF VS-42CTQ030-1PbF FEATURES • • • • • • 150 °C TJ operation Center tap configuration Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Halogen-free according to IEC 61249-2-21 definition Compliant to RoHS directive 2002/95/EC AEC-Q101 qualified Base common cathode 2 Base common cathode 2 • 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode • • • D2PAK TO-262 DESCRIPTION This center tap Schottky rectifier module has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) VR 2 x 20 A 30 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 20 Apk, TJ = 125 °C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 40 30 1100 0.38 - 55 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-42CTQ030SPbF VS-42CTQ030-1PbF 30 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 μs sine or 3 μs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 121 °C, rectangular waveform 40 A Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg 110 360 13 3 mJ A SYMBOL TEST CONDITIONS VALUES 20 UNITS TJ = 25 °C, IAS = 3 A, L = 2.90 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 94221 Revision: 15-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 1 VS-42CTQ030SPbF, VS-42CTQ030-1PbF Vishay High Power Products Schottky Rectifier, 2 x 20 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 20 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 40 A 20 A 40 A Maximum reverse leakage current per leg See fig. 2 Threshold Voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ =TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR TEST CONDITIONS TJ = 25 °C TJ = 125 °C VR = Rated VR VALUES 0.48 0.57 0.38 0.51 3 183 0.22 6.76 2840 8.0 10 000 mA V mΩ pF nH V/μs V UNITS THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style D2PAK SYMBOL TJ, TStg TEST CONDITIONS VALUES - 55 to 150 2.0 RthJC DC operation 1.0 RthCS Mounting surface, smooth and greased 0.50 2 0.07 6 (5) 12 (10) g oz. kgf ⋅ cm (lbf ⋅ in) °C/W UNITS °C Mounting torque Marking device 42CTQ030S 42CTQ030-1 Case style TO-262 www.vishay.com 2 For technical questions, contact: diodestech@vishay.com Document Number: 94221 Revision: 15-Mar-10 VS-42CTQ030SPbF, VS-42CTQ030-1PbF Schottky Rectifier, 2 x 20 A Vishay High Power Products IF - Instantaneous Forward Current (A) 1000 1000 IR - Reverse Current (mA) TJ = 150 °C 100 TJ = 125 °C 10 100 TJ = 100 °C TJ = 75 °C 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C 1 TJ = 50 °C 0.1 TJ = 25 °C 1 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 5 10 15 20 25 30 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 10 000 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) TJ = 25 °C 1000 100 0 5 10 15 20 25 30 35 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 PDM t1 0.1 Single pulse (thermal resistance) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.01 0.1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.01 0.00001 0.0001 0.001 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94221 Revision: 15-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-42CTQ030SPbF, VS-42CTQ030-1PbF Vishay High Power Products Schottky Rectifier, 2 x 20 A 150 Allowable Case Temperature (°C) 16 140 Average Power Loss (W) DC 130 12 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit 8 120 Square wave (D = 0.50) 80 % rated VR applied DC 4 110 See note (1) 100 0 0 5 10 15 20 25 30 0 5 10 15 20 25 30 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V (1) www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94221 Revision: 15-Mar-10 VS-42CTQ030SPbF, VS-42CTQ030-1PbF Schottky Rectifier, 2 x 20 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS1 1 2 3 4 5 6 7 8 - 42 2 C 3 T 4 Q 5 030 6 S 7 TRL PbF 8 9 HPP product suffix Current rating (40 A) Circuit configuration: C = Common cathode T = TO-220 Schottky “Q” series Voltage rating (030 = 30 V) S = D2PAK -1 = TO-262 None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 9 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com/doc?95014 www.vishay.com/doc?95008 www.vishay.com/doc?95032 Document Number: 94221 Revision: 15-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1