43CTQ100STRLPBF

VS-43CTQ...SPbF, VS-43CTQ...-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 20 A VS-43CTQ...SPbF VS-43CTQ...-1PbF FEATURES • • • • 175 °C TJ operation Center tap configuration Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Halogen-free according to IEC 61249-2-21 definition Compliant to RoHS directive 2002/95/EC AEC-Q101 qualified Base common cathode 2 Base common cathode 2 • • • 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode • • • D2PAK TO-262 DESCRIPTION This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) VR 2 x 20 A 80 V/100 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 μs sine 20 Apk, TJ = 125 °C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 40 80/100 850 0.67 - 55 to 175 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-43CTQ080SPbF VS-43CTQ080-1PbF 80 VS-43CTQ100SPbF VS-43CTQ100-1PbF 100 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 μs sine or 3 μs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 135 °C, rectangular waveform 40 A Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg 850 275 7.50 0.50 mJ A SYMBOL TEST CONDITIONS VALUES 20 UNITS TJ = 25 °C, IAS = 0.50 A, L = 60 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 94224 Revision: 15-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 1 VS-43CTQ...SPbF, VS-43CTQ...-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 20 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 20 A Maximum forward voltage drop per leg See fig. 1 VFM (1) 40 A 20 A 40 A Maximum reverse leakage current per leg See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured lead to lead 5 mm from package body Rated VR TEST CONDITIONS TJ = 25 °C TJ = 125 °C VR = Rated VR VALUES 0.81 0.98 0.67 0.81 1 11 0.71 0.43 1480 8.0 10 000 mA V mΩ pF nH V/μs V UNITS THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style D2PAK Marking device Case style TO-262 SYMBOL TJ, TStg TEST CONDITIONS VALUES - 55 to 175 2.0 RthJC DC operation 1.0 RthCS Mounting surface, smooth and greased 0.50 2 0.07 6 (5) 12 (10) g oz. kgf ⋅ cm (lbf ⋅ in) °C/W UNITS °C Mounting torque 43CTQ080S 43CTQ100S 43CTQ080-1 43CTQ100-1 www.vishay.com 2 For technical questions, contact: diodestech@vishay.com Document Number: 94224 Revision: 15-Mar-10 VS-43CTQ...SPbF, VS-43CTQ...-1PbF Series Schottky Rectifier, 2 x 20 A Vishay High Power Products IF - Instantaneous Forward Current (A) 1000 1000 IR - Reverse Current (mA) 100 10 1 0.1 0.01 TJ = 175 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C TJ = 75 °C TJ = 50 °C TJ = 25 °C 100 10 TJ = 175 °C TJ = 125 °C TJ = 25 °C 1 0.2 0.001 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 20 40 60 80 100 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 10 000 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 0 20 40 60 80 100 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 PDM t1 t2 0.1 Single pulse (thermal resistance) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 0.01 0.00001 0.0001 0.001 0.01 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94224 Revision: 15-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-43CTQ...SPbF, VS-43CTQ...-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 20 A 180 170 160 150 140 130 120 110 Allowable Case Temperature (°C) 20 Average Power Loss (W) DC 15 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMS limit 10 Square wave (D = 0.50) 80% rated VR applied 5 See note (1) 100 0 0 5 10 15 20 25 30 0 5 10 15 20 25 30 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Ω Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V (1) www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94224 Revision: 15-Mar-10 VS-43CTQ...SPbF, VS-43CTQ...-1PbF Series Schottky Rectifier, 2 x 20 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS1 1 2 3 4 5 6 7 8 - 43 2 C 3 T 4 Q 5 100 6 S 7 TRL PbF 8 9 HPP product suffix Current rating (40 A) Circuit configuration: C = Common cathode T = TO-220 Schottky “Q” series Voltage ratings S = D2PAK -1 = TO-262 None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 080 = 80 V 100 = 100 V 9 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information SPICE model www.vishay.com/doc?95014 www.vishay.com/doc?95008 www.vishay.com/doc?95032 www.vishay.com/doc?95065 Document Number: 94224 Revision: 15-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Outline Dimensions Vishay High Power Products D2PAK, TO-262 DIMENSIONS FOR D2PAK in millimeters and inches Conforms to JEDEC outline D2PAK (SMD-220) (2)(3) E (3) L1 4 (D1) (3) D H 1 L2 B B A 2 x b2 2xb 0.010 M A M B 2x e Gauge plane 0° to 8° Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode Lead tip L3 L L4 Detail “A” Rotated 90 °CW Scale: 8:1 A1 B Seating plane (b, b2) Section B - B and C - C Scale: None (c) c1 (4) ± 0.004 M B H C c E1 View A - A Plating (4) b1, b3 Base Metal (3) 2.64 (0.103) 2.41 (0.096) 2.32 MIN. (0.08) 2 3 (2) Detail A 17.90 (0.70) 15.00 (0.625) 3.81 MIN. (0.15) 9.65 MIN. (0.38) A A c2 A (E) B Pad layout 11.00 MIN. (0.43) SYMBOL A A1 b b1 b2 b3 c c1 c2 D MILLIMETERS MIN. 4.06 0.00 0.51 0.51 1.14 1.14 0.38 0.38 1.14 8.51 MAX. 4.83 0.254 0.99 0.89 1.78 1.73 0.74 0.58 1.65 9.65 INCHES MIN. 0.160 0.000 0.020 0.020 0.045 0.045 0.015 0.015 0.045 0.335 MAX. 0.190 0.010 0.039 0.035 0.070 0.068 0.029 0.023 0.065 0.380 NOTES SYMBOL D1 E E1 MILLIMETERS MIN. 6.86 9.65 7.90 14.61 1.78 1.27 4.78 MAX. 8.00 10.67 8.80 15.88 2.79 1.65 1.78 5.28 INCHES MIN. 0.270 0.380 0.311 0.575 0.070 0.050 0.188 MAX. 0.315 0.420 0.346 0.625 0.110 0.066 0.070 0.208 NOTES 3 2, 3 3 4 4 4 2 (7) e H L L1 L2 L3 L4 2.54 BSC 0.100 BSC 3 0.25 BSC 0.010 BSC Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch Document Number: 95014 Revision: 31-Mar-09 Outline conforms to JEDEC outline TO-263AB For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Outline Dimensions Vishay High Power Products D2PAK, TO-262 DIMENSIONS FOR TO-262 in millimeters and inches Modified JEDEC outline TO-262 (Datum A) (2) (3) E A (3) L1 Seating plane 1 L2 23 C C D1 (3) A B A c2 E D B B L (2) 3 x b2 3xb 2xe 0.010 M A M B c A1 A E1 Section A - A Plating (4) b1, b3 Base metal c1 (3) Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode c (4) (b, b2) Section B - B and C - C Scale: None Lead tip SYMBOL A A1 b b1 b2 b3 c c1 c2 D D1 E E1 e L L1 L2 MILLIMETERS MIN. 4.06 2.03 0.51 0.51 1.14 1.14 0.38 0.38 1.14 8.51 6.86 9.65 7.90 2.54 BSC 13.46 3.56 14.10 1.65 3.71 (6) INCHES MAX. 4.83 3.02 0.99 0.89 1.78 1.73 0.74 0.58 1.65 9.65 8.00 10.67 8.80 MIN. 0.160 0.080 0.020 0.020 0.045 0.045 0.015 0.015 0.045 0.335 0.270 0.380 0.311 0.100 BSC 0.530 0.140 0.555 0.065 0.146 MAX. 0.190 0.119 0.039 0.035 0.070 0.068 0.029 0.023 0.065 0.380 0.315 0.420 0.346 NOTES 4 4 4 2 3 2, 3 3 3 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Controlling dimension: inches Outline conform to JEDEC TO-262 except A1 (maximum), b (minimum) and D1 (minimum) where dimensions derived the actual package outline www.vishay.com 2 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com Document Number: 95014 Revision: 31-Mar-09 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1