572D226X_016A2_

572D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Conformal Coated, Maximum CV FEATURES • P case offers single-sided lead (Pb)-free terminations • Wraparound lead (Pb)-free terminations: Q, S, A, B and T RoHS COMPLIANT P case top P case bottom B and T cases Q, S and A cases Images not to scale • Low Impedance • 8 mm and 12 mm tape and reel packaging available per EIA-481-1 and reeling per IEC 286-3 7" [178 mm] standard 13" [330 mm] available PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (to + 125 °C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 2.2 µF to 220 µF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 WVDC to 25 WVDC ORDERING INFORMATION 572D TYPE 336 CAPACITANCE X0 CAPACITANCE TOLERANCE X0 = ± 20 % X9 = ± 10 % 6R3 DC VOLTAGE RATING AT + 85 °C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 V). A CASE CODE 2 TERMINATION T REEL SIZE AND PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. See Ratings and Case Codes Table 2 = 100 % Tin T = Tape and Reel 4 = Gold Plated 7" [178 mm] Reel W = 13" [330 mm] Reel Note: Preferred Tolerance and reel sizes are in bold We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size DIMENSIONS in inches [millimeters] L H A CASE CODE P L (MAX.) 0.087 ± 0.012 [2.2 ± 0.3] W 0.049 ± 0.012 [1.25 ± 0.3] Single-side electrodes (Both electrodes at bottom side only) W B C D B 0.031 ± 0.012 [0.8 ± 0.3] C 0.031 ± 0.012 [0.8 ± 0.3] D (REF.) 0.008 [0.2] H 0.039 ± 0.008 [1.0 ± 0.2] A 0.024 ± 0.012 [0.6 ± 0.3] L H A B C D W CASE CODE Q S A B T www.vishay.com 104 L (MAX.) 0.126 ± 0.008 [3.2 ± 0.2] 0.126 ± 0.012 [3.2 ± 0.3] 0.126 ± 0.012 [3.2 ± 0.3] 0.130 ± 0.012 [3.3 ± 0.3] 0.138 ± 0.008 [3.5 ± 0.2] W 0.063 ± 0.008 [1.6 ± 0.2] 0.063 ± 0.012 [1.6 ± 0.3] 0.067 ± 0.012 [1.7 ± 0.3] 0.106 ± 0.012 [2.7 ± 0.3] 0.106 ± 0.008 [2.7 ± 0.2] H 0.031 ± 0.008 [0.8 ± 0.2] 0.039 ± 0.008 [1.0 ± 0.2] 0.05 ± 0.012 [1.3 ± 0.3] 0.066 ± 0.012 [1.7 ± 0.3] 0.039 ± 0.008 [1.0 ± 0.2] A 0.031 ± 0.008 [0.8 ± 0.2] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.008 [0.8 ± 0.2] B 0.047 ± 0.008 [1.2 ± 0.2] 0.047 ± 0.012 [1.2 ± 0.3] 0.047 ± 0.012 [1.2 ± 0.3] 0.047 ± 0.012 [1.2 ± 0.3] 0.047 ± 0.008 [1.2 ± 0.2] C 0.031 ± 0.008 [0.8 ± 0.2] 0.031 ± 0.012 [0.8 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.043 ± 0.012 [1.1 ± 0.3] 0.043 ± 0.008 [1.1 ± 0.2] D (REF.) 0.008 [0.2] 0.008 [0.2] 0.008 [0.2] 0.008 [0.2] 0.008 [0.2] For technical questions, contact: tantalum@vishay.com Document Number: 40064 Revision: 07-Jan-08 572D Solid Tantalum Chip Capacitors Vishay Sprague TANTAMOUNT®, Low Profile, Conformal Coated, Maximum CV RATINGS AND CASE CODE µF 2.2 4.7 6.8 10 15 22 33 47 68 100 220 330 4V 6.3 V 10 V 16 V 25 V Q A/S A A/B/T P A/P/Q/S Q/S S A/B/T/S/Q* B P/A/S S* B B/T P B/B**/T/S T* STANDARD RATINGS CAPACITANCE CASE CODE (µF) 33 220 220 220 220 330* 33 33 33 33 47 47 68 100 100 100 100 100* 220 10 33 33 33 47* 68 100 100 22 22 22 2.2 4.7 4.7 10 P B B T S T* A P Q S Q S S A B T S Q* B P P A S S* B B T A B T Q A S A MAX. DF MAX. ESR MAX. DCL AT + 25 °C AT + 25 °C AT + 25 °C 100 kHz (Ω) (µA) 120 Hz (%) 4 WVDC AT + 85 °C, SURGE = 5.2 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V 572D336X_004P2_001** 1.32 14 1.5 572D227X_004B2_ 8.8 16 0.2 572D227X_004B2_001** 8.8 16 0.2 572D227X_004T2_ 8.8 26 0.6 572D227X0004S2_ 8.8 25 0.8 572D337X_004T2_* 13.2* 26* 0.8* 6.3 WVDC AT 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V 572D336X_6R3A2_ 2.1 8 0.8 572D336X06R3P2_ 2.1 14 1.5 572D336X_6R3Q2_ 2.1 10 2.0 572D336X_6R3S2_ 2.1 10 1.0 572D476X_6R3Q2_ 3.0 10 1.1 572D476X_6R3S2_ 3.0 10 0.9 572D686X06R3S2_ 4.3 12 0.9 572D107X_6R3A2_ 6.3 14 0.5 572D107X_6R3B2_ 6.3 14 0.4 572D107X_6R3T2_ 6.3 14 0.5 572D107X_6R3S2_ 6.3 20 1.0 572D107X_ 6R3Q2_* 6.3* 25* 1.5* 572D227X_6R3B2_ 13.9 16 0.2 10 WVDC AT + 85 °C, SURGE = 13 V . . . 7 WVDC AT + 125 °C, SURGE = 8 V 572D106X_010P2_ 1.0 8 3.0 572D336X0010P2_ 3.3 25 4.0 572D336X0010A2_ 3.3 10 0.8 572D336X0010S2_ 3.3 10 1.1 572D476X0010S2_* 4.7* 14* 1.1* 572D686X_010B2_ 6.8 6 0.45 572D107X0010B2_ 10 14 0.4 572D107X0010T2_ 10.0 18 0.5 16 WVDC AT + 85 °C, SURGE = 20 V . . . 10 WVDC AT + 125 °C, SURGE = 12 V 572D226X_016A2_ 3.5 8 1.4 572D226X_016B2_ 3.5 6 0.5 572D226X_016T2_ 3.5 8 1.0 25 WVDC AT + 85 °C, SURGE = 32 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V 572D225X_025Q2_ 0.65 6 5.0 572D475X_025A2_ 1.2 6 2.0 572D475X_025S2_ 1.2 8 4.0 572D106X_025A2_ 2.5 10 3.5 PART NUMBER MAX. RIPPLE 100 kHz Irms (A) 0.13 0.63 0.63 0.37 0.26 0.56* 0.29 0.13 0.17 0.24 0.22 0.25 0.26 0.36 0.45 0.36 0.24 0.19* 0.63 0.09 0.08 0.29 0.23 0.23* 0.42 0.45 0.40 0.22 0.45 0.24 0.10 0.18 0.12 0.15 Note: * Contact factory for availability ** Special Height: 572D227X_004B2_001, height = 1.7 mm Max.; 572D336X_004P2_001, height = 1.0 mm Max. Document Number: 40064 Revision: 07-Jan-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 105 572D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Low Profile, Conformal Coated, Maximum CV TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY “B” case 1000.0 100.0 __ __ __ 10.0 __ IMPEDANCE ESR Ω 1.0 100 µF - 10 VDC 0.1 220 µF - 6 VDC 0.0 100 1K 10K 100K 1M FREQUENCY IN Hz “P” case 1000.0 100.0 __ __ __ __ Ω 10.0 IMPEDANCE ESR 33 µF - 6 VDC 1.0 10 µF - 10 VDC 0.1 100 1K 10K 100K 1M FREQUENCY IN Hz “Q” case 1000.0 100.0 __ __ __ ESR __ IMPEDANCE Ω 10.0 1.0 47 µF - 6 VDC 33 µ - 6 VDC 0.1 100 1K 10K 100K 1M FREQUENCY IN Hz www.vishay.com 106 For technical questions, contact: tantalum@vishay.com Document Number: 40064 Revision: 07-Jan-08 572D Solid Tantalum Chip Capacitors Vishay Sprague TANTAMOUNT®, Low Profile, Conformal Coated, Maximum CV TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY 220 µF - 4 V T-Case ESR/Z vs. Freq. 100 ESR IMPEDANCE 10 Ω 1 0 0.01 0.10 1.00 10.00 100.00 1000.00 FREQUENCY IN kHz 220 µF - 4 V S-Case ESR/Z vs. Freq. 100 10 ESR IMPEDANCE Ω 1 0 0.01 0.10 1.00 10.00 100.00 1000.00 FREQUENCY IN kHz Document Number: 40064 Revision: 07-Jan-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 107 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1