594D477X9004C8W

594D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated, Maximum CV, Low ESR FEATURES • Large capacitance rating range • Lowest ESR for a surface mount tantalum chip Pb-free capacitor Available • 100 % surge current conditioning for C, D and R RoHS* cases COMPLIANT • Terminations: Tin (2) standard • 8 mm, 12 mm tape and reel packaging available per EIA 481-1 and reeling per IEC 286-3. 7" [178 mm] standard. 13" [330 mm] available • Case code compatibility with EIA 535BAAE and CECC30801 molded chips PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 1.0 µF to 1500 µF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 WVDC to 50 WVDC Equivalent Series Resistance: ESR readings measured at 100 kHz, + 25 °C from 3500 mΩ to 30 mΩ ORDERING INFORMATION 594D TYPE 477 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 CAPACITANCE TOLERANCE X0 = ± 20 % X9 = ± 10 % 004 DC VOLTAGE RATING AT + 85 °C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). R CASE CODE See Ratings and Case Codes Table 2 TERMINATION 2 = 100 % Tin 4 = Gold Plated 8 = Solder Plated (60/40) Special Order T PACKAGING T = Tape and Reel 7" [178 mm] Reel W = 13" [330 mm] Reel See Tape and Reel Specifications. Note: Preferred Tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in inches [millimeters] Tantalum Wire Nib Identifies Anode (+) Terminal W L MAX. D REF. A B J MAX. J MAX. H CASE CODE B C D R L (MAX.) 0.158 [4.0] 0.281 [7.1] 0.293 [7.5] 0.283 [7.2] W 0.110 + 0.012 - 0.016 [2.8 + 0.3 - 0.4] 0.126 ± 0.012 [3.2 ± 0.3] 0.170 + 0.012/- 0.024 [4.3 + 0.3/- 0.6] 0.235 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] H 0.075 + 0.012 - 0.024 [1.9 + 0.3 - 0.6] 0.098 ± 0.012 [2.5 ± 0.3] 0.110 ± 0.012 [2.8 ± 0.3] 0.136 ± 0.012 [3.5 ± 0.3] A 0.031 ± 0.012 [0.80 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± .30] B 0.097 ± 0.016 [2.5 ± 0.4] 0.180 ± 0.024 [4.6 ± 0.6] 0.180 ± 0.024 [4.6 ± 0.6] 0.180 ± 0.024 [4.6 ± 0.6] D (REF.) 0.138 [3.5] 0.236 [6.0] 0.253 [6.4] 0.243 [6.2] J (MAX.) 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] Notes: The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]. * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 40006 Revision: 23-Jan-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 85 594D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Conformal Coated, Maximum CV, Low ESR 10 V 16 V 20 V 25 V 35 V 50 V B RATINGS AND CASE CODES µF 4V 6.3 V 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 B 33 B 47 68 100 B* B 120 C 150 B/C 180 220 C/D 270 D 330 C* C/D 390 R 470 C/R D/R 560 680 D R 1000 R 1500 R * Preliminary values, contact factory for availability B B B B B B B B B/C B/C C C/D D C/D D/R R R B B/C B/C B/C C/D C/D D R R R C D R B C B C C D D D/R R C/D D R R C D R STANDARD/EXTENDED RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz (Ω) 0.38 0.30* 0.25 0.08 0.06 0.08* 0.075 0.045 0.060 0.030 0.380 0.250 0.085 0.080 0.065 0.080 0.080 0.060 0.045 0.060 0.060 0.050 0.045 0.045 0.030 0.030 MAX. RIPPLE 100 kHz Irms (A) 0.47 0.53* 0.58 1.17 1.58 1.17* 1.21 2.36 1.58 2.89 0.47 0.58 1.48 1.37 1.52 1.17 1.17 1.58 2.36 1.58 1.58 2.24 2.36 2.36 2.89 2.89 33 100* 150 150 270 330* 470 470 680 1500 22 100 120 220 220 330 330 330 390 470 470 470 680 680 1000 1000 4 WVDC AT + 85 °C, SURGE = 5.2 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V B 594D336X_004B2T 1.3 6 B* 594D107X_004B2T* 4.0* 8* B 594D157X_004B2T 6.0 8 C 594D157X_004C2T 6.0 8 D 594D277X_004D2T 10.8 8 C* 594D337X_004C2T* 13.2* 8* C 594D477X_004C2T 18.8 10 R 594D477X_004R2T 18.8 10 D 594D687X_004D2T 27.2 12 R 594D158X_004R2T 60.0 20 B B C C D C C D R D D R R R R R 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V 594D226X_6R3B2T 1.4 6 594D107X_6R3B2T 6.3 6 594D127X_6R3C2T 7.6 8 594D227X_6R3C2T 13.9 8 594D227X_6R3D2T 13.9 8 594D337X_6R3C2T 20.8 8 594D337X_6W3C2T 20.8 8 594D337X_6R3D2T 20.8 8 594D397X_6R3R2T 24.6 8 594D477X_6R3D2T 29.6 10 594D477X_6W3D2T 29.6 10 594D477X_6R3R2T 29.6 10 594D687X_6R3R2T 42.8 12 594D687X_6W3R2T 42.8 12 594D108X_6R3R2T 63.0 16 594D108X_6W3R2T 63.0 16 * Preliminary values, contact factory for availability. For 10 % tolerance, specify "9"; for 20 % tolerance, change to "0". www.vishay.com 86 For technical questions, contact: tantalum@vishay.com Document Number: 40006 Revision: 23-Jan-08 594D Solid Tantalum Chip Capacitors TANTAMOUNT®, Conformal Coated, Maximum CV, Low ESR STANDARD/EXTENDED RATINGS CAPACITANCE (µF) 15 33 47 68 68 100 100 120 150 150 180 220 220 330 330 470 680 CASE CODE PART NUMBER MAX. DCL AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz MAX. ESR AT + 25 °C 100 kHz MAX. RIPPLE 100 kHz Irms 0.41 0.41 0.46 0.49 1.05 0.57 1.08 1.08 1.11 1.41 1.29 1.05 1.52 1.52 2.36 2.36 2.36 0.39 0.41 0.86 0.34 1.00 0.95 1.26 1.17 1.41 1.33 2.13 2.13 2.13 0.31 0.31 0.32 0.38 0.86 0.89 1.26 1.33 1.77 0.24 0.31 0.70 0.74 1.05 1.07 1.00 1.60 1.67 0.22 0.25 0.51 0.52 0.75 0.75 1.12 1.12 0.16 0.33 0.58 0.85 Vishay Sprague 10 WVDC AT + 85 °C, SURGE = 13 V . . . 7 WVDC AT + 125 °C, SURGE = 8 V B 594D156X_010B2T 1.5 6 0.50 B 594D336X_010B2T 3.3 6 0.50 B 594D476X_010B2T 4.7 6 0.40 B 594D686X_010B2T 6.8 6 0.350 C 594D686X_010C2T 6.8 6 0.100 B 594D107X_010B2T 10 12 0.250 C 594D107X_010C2T 10 8 0.095 C 594D127X_010C2T 10.2 7 0.095 C 594D157X_010C2T 15 8 0.090 D 594D157X_010D2T 15 8 0.075 D 594D187X_010D2T 14.4 7 0.090 C 594D227X_010C2T 22 8 0.100 D 594D227X_010D2T 22 8 0.065 D 594D337X_010D2T 33 8 0.065 R 594D337X_010R2T 33 8 0.045 R 594D477X_010R2T 47 10 0.045 R 594D687X_010R2T 68 14 0.045 16 WVDC AT + 85 °C, SURGE = 20 V . . . 10 WVDC AT + 125 °C, SURGE = 12 V 15 B 594D156X_016B2T 2.4 6 0.55 33 B 594D336X_016B2T 5.3 6 0.500 33 C 594D336X_016C2T 5.3 6 0.150 47 B 594D476X_016B2T 7.5 6 0.72 47 C 594D476X_016C2T 7.5 6 0.110 68 C 594D686X_016C2T 10.9 6 0.123 68 D 594D686X_016D2T 10.9 6 0.095 100 C 594D107X_016C2T 16 8 0.080 100 D 594D107X_016D2T 16 8 0.075 150 D 594D157X_016D2T 24 8 0.085 180 R 594D187X_016R2T 28.8 8 0.055 220 R 594D227X_016R2T 35.2 8 0.055 330 R 594D337X_016R2T 52.8 8 0.055 20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V 4.7 B 594D475X_020B2T 0.9 6 0.90 6.8 B 594D685X_020B2T 1.4 6 0.90 10 B 594D106X_020B2T 2.0 6 0.85 22 B 594D226X_020B2T 4.4 6 0.60 22 C 594D226X_020C2T 4.4 6 0.150 47 C 594D476X_020C2T 9.4 6 0.140 47 D 594D476X_020D2T 9.4 6 0.095 100 D 594D107X_020D2T 20 8 0.085 120 R 594D127X_020R2T 24 8 0.080 25 WVDC AT + 85 °C, SURGE = 32 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V 3.3 B 594D335X_025B2T 0.8 6 1.50 10 B 594D106X_025B2T 2.5 6 0.900 15 C 594D156X_025C2T 3.8 6 0.220 22 C 594D226X_025C2T 5.5 6 0.200 33 D 594D336X_025D2T 8.3 6 0.130 47 D 594D476X_025D2T 11.8 6 0.130 68 D 594D686X_025D2T 17 8 0.200 68 R 594D686X_025R2T 17 6 0.095 100 R 594D107X_025R2T 25 8 0.090 35 WVDC AT + 85 °C, SURGE = 46 V . . . 23 WVDC AT + 125 °C, SURGE = 28 V 2.2 B 594D225X_035B2T 0.8 6 1.70 4.7 B 594D475X_035B2T 1.6 6 1.40 6.8 C 594D685X_035C2T 2.4 6 0.43 15 C 594D156X_035C2T 5.3 6 0.40 15 D 594D156X_035D2T 5.3 6 0.27 22 D 594D226X_035D2T 7.7 6 0.27 33 R 594D336X_035R2T 11.6 6 0.20 47 R 594D476X_035R2T 16.6 6 0.20 50 WVDC AT + 85 °C, SURGE = 65 V . . . 33 WVDC AT + 125 °C, SURGE = 38 V 1.0 B 594D105X_050B2T 0.5 4 3.5 4.7 C 594D475X_050C2T 2.4 6 1.0 6.8 D 594D685X_050D2T 3.4 6 .45 15 R 594D156X_050R2T 7.5 6 .35 * Preliminary values, contact factory for availability. For 10 % tolerance, specify "9"; for 20 % tolerance, change to "0". Document Number: 40006 Revision: 23-Jan-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 87 594D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Conformal Coated, Maximum CV, Low ESR TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY "B" Case 1000 100 IMPEDANCE 10 ESR "C" Case IMPEDANCE 100 ESR Ω 10 Ω 2.2 µF, 35 VDC 1 1.0 15 µF, 25 VDC 0.1 22 µF, 6.3 VDC 0.1 100 1K 10K 100K FREQUENCY IN Hz 1M 10M 0.01 100 1K 10K 100K FREQUENCY IN Hz 120 µF, 6.3 VDC 1M 10M "D" Case 100 IMPEDANCE 10 ESR 10 100 "R" Case IMPEDANCE ESR Ω 33 µF, 25 VDC 1.0 Ω 1.0 390 µF, 6.3 VDC 0.1 33 µF, 35 VDC 0.1 220 µF, 6.3 VDC 0.01 100 1K 10K 100K FREQUENCY IN Hz 1M 10M 0.01 100 1K 10K 100K FREQUENCY IN Hz 1M 10M www.vishay.com 88 For technical questions, contact: tantalum@vishay.com Document Number: 40006 Revision: 23-Jan-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1