5KASMC10A

New Product 5KASMC10A thru 5KASMC43A Vishay General Semiconductor Surface Mount PAR® Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Junction passivation optimized design passivated anisotropic rectifier technology • TJ = 185 °C capability suitable for high reliability and automotive requirement • Available in uni-directional polarity only • 5000 W peak pulse power capability with a 10/1000 μs waveform DO-214AB (SMC) • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition PRIMARY CHARACTERISTICS VWM PPPM (10 x 1000 μs) PD at TM = 50 °C TJ max. 10 V to 43 V 5000 W 6.5 W 185 °C MECHANICAL DATA Case: DO-214AB (SMC) Molding compound meets UL 94 V-0 flammability rating Base P/NHM3 - halogen-free, RoHS compliant, and AEC-Q101 qualified Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end per TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (fig. 3) Peak power pulse current with a 10/1000 μs waveform (fig. 1) Power dissipation on infinite heatsink, TM = 50 °C Operating junction and storage temperature range Note (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A SYMBOL PPPM IPPM PD TJ, TSTG (1) (1) VALUE 5000 See next table 6.5 - 65 to + 185 UNIT W A W °C Document Number: 89432 Revision: 23-May-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product 5KASMC10A thru 5KASMC43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. 5KASMC10A 5KASMC12A 5KASMC13A 5KASMC16A 5KASMC17A 5KASMC18A 5KASMC20A 5KASMC22A 5KASMC24A 5KASMC26A 5KASMC28A 5KASMC30A 5KASMC33A 5KASMC36A 5KASMC40A 5KASMC43A 5AX 5BE 5BG 5BP 5BR 5BT 5BV 5BX 5BZ 5CE 5CG 5CK 5CM 5CP 5CR 5CT 11.1 13.3 14.4 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 MAX. 12.3 14.7 15.9 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 TEST CURRENT IT (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 STAND-OFF VOLTAGE VWM (V) 10 12 13 16 17 18 20 22 24 26 28 30 33 36 40 43 MAXIMUM REVERSE LEAKAGE AT VWM IR (μA) 20.0 10.0 10.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 MAXIMUM REVERSE LEAKAGE AT VWM TJ = 150 °C ID (μA) 500 300 300 50 50 50 50 50 50 50 50 50 50 50 50 50 MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) 294.1 251.3 232.6 192.3 181.2 171.2 154.3 140.8 128.5 118.8 110.1 103.3 93.8 86.1 77.5 72.0 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 17.0 19.9 21.5 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 Notes (1) Pulse test: t  50 ms p (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance, junction to ambient Typical thermal resistance, junction to mount Notes Mounted on minimum recommended pad layout (2) Mounted on infinite heat sink (1) SYMBOL RJA (1) RJM (2) VALUE 100 20.8 UNIT °C/W °C/W ORDERING INFORMATION (Example) PREFERRED P/N 5KASMC10AHM3/57 (1) UNIT WEIGHT (g) 0.257 0.257 PREFERRED PACKAGE CODE 57 9A BASE QUANTITY 850 3500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 5KASMC10AHM3/9A (1) Note (1) AEC-Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89432 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 23-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product 5KASMC10A thru 5KASMC43A Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 1 000 000 CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 000 Measured at Zero Bias 10 000 10 1000 Measured at Stand-Off Voltage VWM 1 1 10 100 1000 100 10 20 30 40 50 td - Pulse Width (µs) Reverse Voltage (V) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 100 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 TA, Mounted on Minimum Recommended Pad Layout 0 25 50 75 100 125 150 175 200 TM, Mounted on Infinite Heatsink 75 50 25 0 0 50 100 150 200 PD - Power Dissipation (W) 0 TJ - Initial Temperature (°C) Temperature (°C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 5 - Maximum Non-Repetitive/Peak Forward Surge Current 150 IPPM - Peak Pulse Current (% IRSM) tr = 10 µs tr = 8 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 50 td = 1000 µs td = 20 µs td 0 0 1.0 2.0 3.0 4.0 Transient Thermal Impedance (°C/W) TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM 100 10 1 0.01 0.1 1 10 100 1000 t - Time (ms) tp - Pulse Duration (s) Fig. 3 - Pulse Waveform Fig. 6 - Power Derating Curve Document Number: 89432 Revision: 23-May-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product 5KASMC10A thru 5KASMC43A Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AB (SMC) Cathode Band Mounting Pad Layout 0.185 (4.69) MAX. 0.126 (3.20) 0.114 (2.90) 0.246 (6.22) 0.220 (5.59) 0.126 (3.20) MIN. 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) 0.060 (1.52) MIN. 0.320 (8.13) REF. www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 89432 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 23-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000