61CTQ040PBF

61CTQ...PbF Series Vishay High Power Products Schottky Rectifier, 2 x 30 A FEATURES Base 2 common cathode • • • • • Anode TO-220AB Anode 2 1 Common 3 cathode 175 °C TJ operation Pb-free Center tap TO-220 package Available Low forward voltage drop RoHS* High frequency operation COMPLIANT High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Lead (Pb)-free (“PbF” suffix) • Designed and qualified for industrial level DESCRIPTION PRODUCT SUMMARY IF(AV) VR 2 x 30 A 35 to 45 V This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFRM IFSM VF TJ TC = 142 °C (per leg) tp = 5 µs sine 30 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform (per device) VALUES 60 35 to 45 60 2600 0.57 - 65 to 175 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 61CTQ035PbF 35 61CTQ040PbF 40 61CTQ045PbF 45 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current per leg per device SYMBOL IF(AV) IFRM IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TEST CONDITIONS TC = 142 °C, rated VR Rated VR, square wave, 20 kHz, TC = 142 °C 5 µs sine or 3 µs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 30 60 60 2600 350 27 4 mJ A A UNITS Peak repetitive forward current per leg Maximum peak one cycle non-repetitive surge current per leg Non-repetitive avalanche energy per leg Repetitive avalanche current per leg TJ = 25 °C, IAS = 4 A, L = 3.4 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94241 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 61CTQ...PbF Series Vishay High Power Products ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 30 A Maximum forward voltage drop VFM (1) 60 A 30 A 60 A Maximum instantaneous reverse current Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C TYP. 0.57 0.72 0.53 0.70 0.06 21 1900 8.0 10 000 MAX. 0.61 0.76 0.57 0.74 1 40 mA pF nH V/µs V UNITS Schottky Rectifier, 2 x 30 A TJ = 125 °C Rated DC voltage VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured from top of terminal to mounting plane Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Typical thermal resistance, case to heatsink Approximate weight minimum maximum SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface, smooth and greased TEST CONDITIONS VALUES - 65 to 175 1.2 °C/W 0.50 2 0.07 Non-lubricated threads 6 (5) 12 (10) g oz. kgf · cm (lbf · in) UNITS °C Mounting torque 61CTQ035 Marking device Case style TO-220AB 61CTQ040 61CTQ045 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94241 Revision: 13-Aug-08 61CTQ...PbF Series Schottky Rectifier, 2 x 30 A Vishay High Power Products IF - Instantaneous Forward Current (A) 1000 1000 IR - Reverse Current (mA) 100 10 1 0.1 TJ = 175 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C TJ = 75 °C TJ = 50 °C 100 10 TJ = 175 °C TJ = 125 °C TJ = 25 °C 0.01 0.001 TJ = 25 °C 0 10 20 30 40 50 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10 000 CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 0 5 10 15 20 25 30 35 40 45 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 0.1 0.01 Single pulse (thermal resistance) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 0.001 0.00001 0.0001 0.001 0.01 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94241 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 61CTQ...PbF Series Vishay High Power Products 180 Schottky Rectifier, 2 x 30 A 30 Allowable Case Temperature (°C) 160 DC Average Power Loss (W) 25 20 15 10 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit 140 Square wave (D = 0.50) 80 % rated VR applied 120 See note (1) 100 0 5 10 15 20 25 30 35 40 45 DC 5 0 0 5 10 15 20 25 30 35 40 45 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) 10 000 At any rated load condition and with rated VRRM applied following surge 1000 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94241 Revision: 13-Aug-08 61CTQ...PbF Series Schottky Rectifier, 2 x 30 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 61 1 1 2 3 4 5 6 - C 2 T 3 Q 4 045 PbF 5 6 Current rating (60 = 60 A) Circuit configuration: C = Common cathode Package: T = TO-220 Schottky “Q” series Voltage ratings None = Standard production PbF = Lead (Pb)-free 035 = 35 V 040 = 40 V 045 = 45 V - Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95222 http://www.vishay.com/doc?95225 Document Number: 94241 Revision: 13-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1