62CTQ030

62CTQ030 Vishay High Power Products Schottky Rectifier, 2 x 30 A FEATURES Base 2 common cathode • • • • • Anode TO-220AB Anode 2 1 Common 3 cathode 150 °C TJ operation Center tap TO-220 package Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Designed and qualified for industrial level DESCRIPTION PRODUCT SUMMARY IF(AV) VR 2 x 30 A 30 V This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFRM IFSM VF TJ TC = 120 °C (per leg) tp = 5 µs sine 30 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform (per device) VALUES 60 30 60 1500 0.44 - 65 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 62CTQ030 30 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current per leg per device SYMBOL IF(AV) IFRM IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TEST CONDITIONS 50 % duty cycle at TC = 120 °C, rectangular waveform Rated VR, square wave, 20 kHz, TC = 127 °C 5 µs sine or 3 µs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 30 60 60 1500 300 13 3 mJ A A UNITS Peak repetitive forward current per leg Maximum peak one cycle non-repetitive surge current per leg Non-repetitive avalanche energy per leg Repetitive avalanche current per leg TJ = 25 °C, IAS = 3 A, L = 2.9 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 93376 Revision: 21-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 62CTQ030 Vishay High Power Products Schottky Rectifier, 2 x 30 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 30 A Maximum forward voltage drop VFM (1) 60 A 30 A 60 A Maximum instantaneous reverse current Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C TYP. 0.46 0.56 0.39 0.54 0.4 180 3000 8.0 10 000 MAX. 0.5 0.6 0.44 0.59 2.5 350 mA pF nH V/µs V UNITS TJ = 125 °C Rated DC voltage VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured from top of terminal to mounting plane Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to case per leg Typical thermal resistance, case to heatsink Approximate weight minimum maximum SYMBOL TJ TStg RthJC RthCS DC operation Mounting surface, smooth and greased TEST CONDITIONS VALUES - 65 to 150 - 65 to 175 1.2 °C/W 0.50 2 0.07 Non-lubricated threads Case style TO-220AB 6 (5) 12 (10) g oz. kgf · cm (lbf · in) UNITS °C Mounting torque Marking device 62CTQ030 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93376 Revision: 21-Aug-08 62CTQ030 Schottky Rectifier, 2 x 30 A Vishay High Power Products 1000 1000 TJ = 150 °C IR - Reverse Current (mA) 100 10 1 0.1 0.01 0.001 IF - Instantaneous Forward Current (A) 100 TJ = 125 °C TJ = 100 °C TJ = 75 °C TJ = 50 °C 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C TJ = 25 °C 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 5 10 15 20 25 30 30 40 45 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10 000 CT - Junction Capacitance (pF) TJ = 25 °C 1000 0 5 10 15 20 25 30 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 0.1 0.01 Single pulse (thermal resistance) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.001 0.01 0.1 1 10 0.001 0.00001 0.0001 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93376 Revision: 21-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 62CTQ030 Vishay High Power Products Schottky Rectifier, 2 x 30 A 160 25 Allowable Case Temperature (°C) 150 140 130 120 110 100 90 80 70 60 0 5 10 15 20 25 30 35 40 45 See note (1) 0 0 Square wave (D = 0.50) 80 % rated VR applied Average Power Loss (W) DC 20 15 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit 10 DC 5 5 10 15 20 25 30 35 40 45 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) 10 000 At any rated load condition and with rated VRRM applied following surge 1000 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93376 Revision: 21-Aug-08 62CTQ030 Schottky Rectifier, 2 x 30 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 62 1 1 2 3 4 5 6 - C 2 T 3 Q 4 030 5 6 Current rating (60 A) Circuit configuration: C = Common cathode Package: T = TO-220 Schottky “Q” series Voltage rating (030 = 30 V) None = Standard production PbF = Lead (Pb)-free - Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95222 http://www.vishay.com/doc?95225 Document Number: 93376 Revision: 21-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1