6CWH02FNTRRPBF

6CWH02FNPbF Vishay High Power Products Ultrafast Rectifier, 2 x 3 A FRED PtTM FEATURES Base common cathode 4 • Ultrafast recovery time • Low forward voltage drop • Low leakage current • 175 °C operating junction temperature • Lead (Pb)-free ("PbF" suffix) • Designed and qualified for Q101 level 3 Anode RoHS COMPLIANT D-PAK Anode 2 Common 1 cathode DESCRIPTION/APPLICATIONS Vishay HPP´s 200 V series are the state of the art hyperfast recovery rectifiers specifically designed with optimized performance of forward voltage drop and hyperfast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, dc-to-dc converters as well as freewheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. PRODUCT SUMMARY trr IF(AV) VR 25 ns 2x3A 200 V ABSOLUTE MAXIMUM RATINGS PARAMETER Peak repetitive reverse voltage Average rectified forward current per device Non-repetitive peak surge current Peak repetitive forward current per diode Operating junction and storage temperatures SYMBOL VRRM IF(AV) IFSM IFM TJ, TStg Rated VR , square wave, 20 kHz, TC = 159 °C Total device, rated VR, TC = 159 °C TEST CONDITIONS MAX. 200 6 50 6 - 65 to 175 °C A UNITS V ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR IR = 100 µA IF = 3 A Forward voltage VF IF = 3 A, TJ = 125 °C IF = 6 A IF = 6 A, TJ = 125 °C Reverse leakage current Junction capacitance Series inductance IR CT LS VR = VR rated TJ = 125 °C, VR = VR rated VR = 200 V Measured lead to lead 5 mm from package body TEST CONDITIONS MIN. 200 TYP. 12 8.0 MAX. 1 0.9 1.2 1.08 5 100 µA pF nH V UNITS Document Number: 94550 Revision: 21-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 6CWH02FNPbF Vishay High Power Products Ultrafast Rectifier, 2 x 3 A FRED PtTM DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS IF = 1.0 A, dIF/dt = 50 A/µs, VR = 30 V Reverse recovery time trr TJ = 25 °C TJ = 125 °C Peak recovery current IRRM TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C IF = 3 A VR = 160 V dIF/dt = 200 A/µs MIN. TYP. 19 26 3.1 4.6 30 60 MAX. 35 A ns UNITS Reverse recovery charge Qrr nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Thermal resistance, junction to case per leg Thermal resistance, junction to ambient per leg Thermal resistance, case to heatsink Weight Mounting torque Marking device SYMBOL TJ, TStg RthJC RthJA RthCS MIN. - 65 6.0 (5.0) Case style D-PAK TYP. 0.3 0.01 MAX. 175 5 80 12 (10) 6CWH02FN g oz. kgf · cm (lbf · in) °C/W UNITS °C www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94550 Revision: 21-Jul-08 6CWH02FNPbF Ultrafast Rectifier, 2 x 3 A FRED PtTM 100 Vishay High Power Products 100 Reverse Current - I R (μA) T J = 175˚C 10 150˚C 125˚C 100˚C 1 0.1 Instantaneous Forward Current - I F (A) 0.01 25˚C 10 0.001 0 50 100 150 Reverse Voltage - VR (V) 200 Tj = 175°C Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 100 Junction Capacitance - C T (pF) T = 25˚C J 1 Tj = 125°C Tj = 25°C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 10 1 10 100 1000 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 Thermal Impedance Z thJC (°C/W) D = 0.5 D = 0.2 1 D = 0.1 D = 0.05 D = 0.02 D = 0.01 0.1 Single Pulse (Thermal Resistance) 0.01 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94550 Revision: 21-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 6CWH02FNPbF Vishay High Power Products Ultrafast Rectifier, 2 x 3 A FRED PtTM 50 180 Allowable Case Temperature (°C) 170 160 150 140 130 0 1 2 3 4 Average Forward Current - IF(AV)(A) 5 Square wave (D=0.50) rated Vr applied 40 IF = 3 A IF = 6 A DC trr ( nC ) see note (1) V R= 30V T J = 125˚C T J = 25˚C 30 20 10 100 1000 Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current di F /dt (A/μs ) Fig. 7 - Typical Reverse Recovery vs. dIF/dt 140 5 120 V R= 30V T J = 125˚C T J = 25˚C Average Power Loss ( Watts ) 4 RMS Limit 100 IF = 6 A IF = 3 A 2 Qrr ( nC ) 5 3 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 80 60 1 DC 40 0 0 1 2 3 4 20 Average Forward Current - IF(AV) (A) 0 100 1000 Fig. 6 - Forward Power Loss Characteristics di F /dt (A/μs ) Fig. 8 - Typical Stored Charge vs. dIF/dt Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94550 Revision: 21-Jul-08 6CWH02FNPbF Ultrafast Rectifier, 2 x 3 A FRED PtTM Vishay High Power Products VR = 200 V 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) IF 0 trr ta tb Qrr (2) (4) IRRM 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under cur ve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 94550 Revision: 21-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 6CWH02FNPbF Vishay High Power Products ORDERING INFORMATION TABLE Ultrafast Rectifier, 2 x 3 A FRED PtTM Device code 6 C 2 W H 4 02 5 FN TRL PbF 6 7 8 1 3 1 2 3 4 4 5 6 7 - Current rating (6 = 6 A) C = Center tap configuration Package identifier: W = D-PAK H = Hyperfast recovery Voltage rating (02 = 200 V) FN = TO-252AA None = Tube (50 pieces) TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95016 http://www.vishay.com/doc?95059 http://www.vishay.com/doc?95033 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 94550 Revision: 21-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1