82DA682M050JD2D

82DA Vishay Sprague Aluminum Capacitors + 85 °C, Snap-In, General Purpose FEATURES • Maximum CV Pb-free • General purpose design • Wide voltage range Available • Molded cover available in 2 or 3 terminal design with standoffs • Replaces type 82D Fig.1 Component Outlines QUICK REFERENCE DATA DESCRIPTION Nominal case size Ø D x L in inches (mm) Operating temperature Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Termination Life validation test at 85 °C VALUE 0.87 x 1.00 (22.0 x 25.0) to 1.57 x 3.18 (40.0 x 80.0) - 40 °C to + 85 °C 33 µF to 270 000 µF ± 20 % 6.3 WVDC to 500 WVDC Snap-in 2000 h: ΔCAP ≤ 15 % from initial measurement. ΔESR ≤ 1.5 x initial specified limit. ΔDCL ≤ initial specified limit 500 h: ΔCAP ≤ 15 % from initial measurement. ΔESR ≤ 1.3 x initial specified limit. ΔDCL ≤ 2 x initial specified limit I = K CV K = 4.0 at + 25 °C I in µA, C in µF, V in Volts RIPPLE CURRENT MULTIPLIERS TEMPERATURE AMBIENT TEMPERATURE + 55 °C + 65 °C + 75 °C + 85 °C FREQUENCY (Hz) WVDC 16 to 49 50 to 199 200 to 400 50 TO 60 0.85 0.83 0.80 300 TO 1000 1.10 1.15 1.30 1000 AND UP 1.15 1.20 1.40 MULTIPLIERS 2.0 1.7 1.4 1.0 Shelf life at 85 °C DC leakage current 5 min charge time DIMENSIONS in inches (millimeters) DIAMETER CASE CODE HA HB HD JA JB JC JD JE KA KB KC KD KE D + 0.04 - 0 (+ 1.0 - 0) 0.87 (22.0) 0.87 (22.0) 0.87 (22.0) 1.00 (25.0) 1.00 (25.0) 1.00 (25.0) 1.00 (25.0) 1.00 (25.0) 1.18 (30.0) 1.18 (30.0) 1.18 (30.0) 1.18 (30.0) 1.18 (30.0) LENGTH L ± 0.08 (2.0) 1.00 (25.0) 1.18 (30.0) 1.57 (40.0) 1.00 (25.0) 1.18 (30.0) 1.38 (35.0) 1.57 (40.0) 2.00 (50.0) 1.00 (25.0) 1.18 (30.0) 1.38 (35.0) 1.57 (40.0) 2.00 (50.0) STYLE 2 TYPICAL WEIGHT (g) 16.0 19.0 24.0 20.0 24.0 27.0 31.0 38.0 30.0 35.0 39.0 44.0 53.0 DIAMETER CASE CODE MB MC MD ME MF MG NA NB NC ND NE NF NG D + 0.04 - 0 (+ 1.0 - 0) 1.38 (35.0) 1.38 (35.0) 1.38 (35.0) 1.38 (35.0) 1.38 (35.0) 1.38 (35.0) 1.58 (40.0) 1.58 (40.0) 1.58 (40.0) 1.58 (40.0) 1.58 (40.0) 1.58 (40.0) 1.58 (40.0) LENGTH L ± 0.08 (2.0) 1.18 (30.0) 1.38 (35.0) 1.57 (40.0) 2.00 (50.0) 2.50 (63.0) 3.18 (80.0) 1.00 (25.0) 1.18 (30.0) 1.38 (35.0) 1.57 (40.0) 2.00 (50.0) 2.50 (63.0) 3.18 (80.0) STYLE 2 TYPICAL WEIGHT (g) 48.0 54.0 61.0 74.0 91.0 113.0 48.0 58.0 66.0 81.0 103.0 128.0 183.0 www.vishay.com 227 Document Number: 42064 Revision: 29-Aug-08 For technical questions, contact: aluminumcaps4@vishay.com 82DA Vishay Sprague Aluminum Capacitors + 85 °C, Snap-In, General Purpose DIMENSIONS in inches (millimeters) CIRCUIT BOARD MOUNT TERMINAL DIMENSIONS (1) DIAMETER D 1.00 (25.0) 1.18 (30.0) 1.38 (35.0) CASE CODE J K M B 0.093 (2.4) 0.125 (3.2) 0.125 (3.2) STYLE A R 0.301 (7.6) 0.363 (9.2) 0.458 (11.6) C 140° 120° 120° STYLE B R N/A 0.391 (9.9) 0.458 (11.6) Note (1) Style A and B not available in 0.87" (22.0 mm) diameter units DIMENSIONS AND AVAILABLE FORMS Style A Style B Style D www.vishay.com 228 For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42064 Revision: 29-Aug-08 82DA Aluminum Capacitors + 85 °C, Snap-In, General Purpose TERMINAL CONFIGURATION (numbers in brackets indicate millimeters) LEAD CODE DESCRIPTION OUTLINE DRAWINGS MOUNTING TERMINAL CONFIGURATION CONFIGURATION AVAILABLE DIAMETERS 0.87 (22.0) - H 0.98 (25.0) - J 1.18 (30.0) - K 1.38 (35.0) - M 0.98 (25.0) - J 1.18 (30.0) - K 1.38 (35.0) - M AVAILABLE VOLTAGES AND TYPES All voltages 81D, 81DA 82D, 82DA All voltages 82D, 82DA V ≤ 250 VDC 81D, 81DA All voltages 82D, 82DA V ≤ 250 VDC 81D, 81DA Vishay Sprague D Standard 2 pin snap-in A 2 straight wire lead molded cover with standoffs + B 3 straight wire lead molded cover with standoffs + 1.18 (30.0) - K 1.38 (35.0) - M ORDERING EXAMPLE Electrolytic capacitor 82DA series: 82DA 222 M 050 HA 2 D E3 EXPLANATION Product type Capacitance value (2200 µF) Tolerance (M = ± 20 %) Voltage rating at 85 °C (50 V) Can size (see dimensions table) PVC insulating sleeve Terminal style (D = 2 pin snap-in) RoHS compliant DESCRIPTION CODE 82DA 222 M 050 HA 2 D E3 ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (µF) 15 000.0 6800.0 6800.0 10 000.0 2700.0 4700.0 6800.0 10 000.0 2200.0 3300.0 6800.0 330.0 820.0 1000.0 1200.0 220.0 PART NUMBER 82DA153M016KA2D 82DA682M025HB2D 82DA682M025JA2D 82DA103M025KA2D 82DA272M035HA2D 82DA472M035JA2D 82DA682M035KA2D 82DA103M035KB2D 82DA222M050HA2D 82DA332M050HB2D 82DA682M050JD2D 82DA331M200JB2D 82DA821M200KD2D 82DA102M200KE2D 82DA122M200MD2D 82DA221M250HD2D MAX. ESR at 25 °C (mΩ) NOMINAL CASE SIZE DxL 20 to 40 kHZ 120 HZ 16 WVDC at + 85 °C, SURGE = 20 V 1.181 x 0.984 (30.0 x 25.0) 67.7 54.0 25 WVDC at + 85 °C, SURGE = 30 V 0.866 x 1.181 (22.0 x 30.0) 73.5 56.1 0.984 x 0.984 (25.0 x 25.0) 83.8 60.0 1.181 x 0.984 (30.0 x 25.0) 71.0 54.0 35 WVDC at + 85 °C, SURGE = 40 V 0.866 x 0.984 (22.0 x 25.0) 120.0 87.4 0.984 x 0.984 (25.0 x 25.0) 89.0 62.0 1.181 x 0.984 (30.0 x 25.0) 75.0 540.0 1.181 x 1.181 (30.0 x 30.0) 57.0 41.0 50 WVDC at + 85 °C, SURGE = 63 V 0.866 x 0.984 (22.0 x 25.0) 115.0 76.0 0.866 x 1.181 (22.0 x 30.0) 86.0 57.0 0.984 x 1.575 (25.0 x 40.0) 47.0 31.0 200 WVDC at + 85 °C, SURGE = 250 V 0.984 x 1.181 (25.0 x 30.0) 401.0 191.0 1.181 x 1.575 (30.0 x 40.0) 180.0 87.0 1.181 x 1.969 (30.0 x 50.0) 142.0 67.0 1.378 x 1.575 (35.0 x 40.0) 147.0 74.0 250 WVDC at + 85 °C, SURGE = 300 V 0.866 x 1.575 (22.0 x 40.0) 558.0 166.0 MAX. RIPPLE at + 85 °C (A) 120 HZ 20 to 40 kHZ 3.07 2.57 2.48 3.00 1.91 2.42 2.92 3.60 1.94 2.38 3.91 1.28 2.36 2.89 2.89 1.12 3.47 2.94 2.93 3.47 2.24 2.86 3.42 4.20 2.39 2.92 4.96 1.86 3.41 4.22 4.06 2.12 Note • Other ratings and voltages available on special order Document Number: 42064 Revision: 29-Aug-08 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com 229 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1