88CNQ060ASL

88CNQ060A Series Vishay High Power Products Schottky Rectifier New Generation 3 D-61 Package, 2 x 40 A 88CNQ060A Base common cathode FEATURES • 150 °C TJ operation • Center tap module • Low forward voltage drop 1 Anode 1 2 Common cathode 3 Anode 2 • High frequency operation • Guard ring for enhanced ruggedness and long term reliability • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance D-61-8 88CNQ060ASM 1 Anode 1 2 Common cathode 3 Anode 2 • New fully transfer-mold low profile, small footprint, high current package • Designed and qualified for industrial level D-61-8-SM DESCRIPTION 88CNQ060ASL Base common cathode 1 D-61-8-SL Anode 1 3 Anode 2 The center tap Schottky rectifier module has been optimized for very low forward voltage drop with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) VR IRM 2 x 40 A 60 V 240 mA at 125 °C MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 40 Apk, TJ = 125 °C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 80 60 5000 0.56 - 55 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 88CNQ060A 60 UNITS V Document Number: 93411 Revision: 02-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 88CNQ060A Series Vishay High Power Products Schottky Rectifier New Generation 3 D-61 Package, 2 x 40 A TEST CONDITIONS 50 % duty cycle at TC = 120 °C, rectangular waveform, rated VR 80 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 1 A, L = 0.57 mH Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical Following any rated load condition and with rated VR applied A 5000 600 75 1.0 mJ A VALUES 40 IF(AV) per device UNITS ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per leg SYMBOL Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 40 A Maximum forward voltage drop per leg VFM (1) 80 A 40 A 80 A Typical reverse leakage current per leg See fig. 2 Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C TJ = 125 °C VALUES 0.58 0.77 0.56 0.67 0.64 240 5200 5.5 10 000 mA pF nH V/µs V UNITS VR = Rated VR VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C Measured lead to lead 5 mm from package body Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, case to heatsink (D-61-8 only) Approximate weight Mounting torque (D-61-8 only) minimum maximum Case style D-61-8 Marking device Case style D-61-8-SM Case style D-61-8-SL per leg per package SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface, smooth and greased Device flatness < 5 mils TEST CONDITIONS VALUES - 55 to 150 0.85 0.42 0.30 7.8 0.28 40 (35) 58 (50) g oz. kgf · cm (lbf · in) °C/W UNITS °C 88CNQ060A 88CNQ060ASM 88CNQ060ASL www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93411 Revision: 02-Sep-08 88CNQ060A Series Schottky Rectifier Vishay High Power Products New Generation 3 D-61 Package, 2 x 40 A 1000 1000 Reverse Current - I R (mA) Tj = 150°C 100 10 125°C 100°C 75°C 1 0.1 0.01 0 10 20 50°C 25°C (A) Instantaneous Forward Current - I F 100 30 40 50 60 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) 10000 Tj = 125˚C Tj = 25˚C Junction Capacitance - C T (p F) 10 Tj = 150˚C Tj = 25°C 1000 1 0 0.2 0.4 0.6 0.8 1 Forward Voltage Drop - VFM (V) 1.2 100 0 10 20 30 40 50 60 Reverse Voltage - VR (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM thJC (°C/W) 0.1 Thermal Impedance Z t1 0.01 Single Pulse (Thermal Resistance) t2 Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 93411 Revision: 02-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 88CNQ060A Series Vishay High Power Products Schottky Rectifier New Generation 3 D-61 Package, 2 x 40 A 35 Allowable Power Loss (Watts) 160 Allowable Lead Temperature (°C) 150 140 130 120 Square wave (D = 0.5) 110 80% rated Vr applied DC 30 25 20 15 10 5 0 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit DC 100 see note (1) 90 0 10 20 30 40 50 60 Average Forward Current - I F(AV) (A) 10 20 30 40 50 60 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Lead Temperature vs. Average Forward Current Fig. 6 - Maximum Average Forward Dissipation vs. Average Forward Current 10000 Non-Repetitive Surge Current - I FSM (A) Tj = 25°C 1000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Peak Surge Forward Current vs. Pulse Duration Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93411 Revision: 02-Sep-08 88CNQ060A Series Schottky Rectifier Vishay High Power Products New Generation 3 D-61 Package, 2 x 40 A ORDERING INFORMATION TABLE Device code 88 1 C 2 N 3 Q 4 060 5 A 6 7 1 2 3 4 5 6 - Current rating (80 A) Circuit configuration: C = Common cathode Package: N = D-61 Schottky “Q” series Voltage ratings (060 = 60 V) Package style: A = D-61-8 ASM = D-61-8-SM ASL = D-61-8-SL 7 - None = Standard production PbF = Lead (Pb)-free (D-61-8 only) Standard pack quantity: A = 10 pieces; ASM/ASL = 20 pieces LINKS TO RELATED DOCUMENTS Dimensions Part marking information http://www.vishay.com/doc?95354 http://www.vishay.com/doc?95356 Document Number: 93411 Revision: 02-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1