893D106X0010B8W

893D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Built-In-Fuse Miniature, Molded-Case FEATURES • Terminations: 100 % Matte Tin standard, Pb-free Tin/Lead available Available • Molded package available in three case RoHS* codes COMPLIANT • Compatible with “High Volume” automatic pick and place • Electrically activated internal fuse • Meets EIA 535BAAC and IEC specification QC300801/US0001 • Fuse activation at 25 °C: 0.1 second max. with 5 A min. applied current • 100 % surge current tested (D and E Case codes) PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 °C to + 125 °C Capacitance Range: 0.47 µF to 470 µF Voltage Rating: 4 VDC to 50 VDC Capacitance Tolerance: ± 10 %, ± 20 % Note: References Molded Guide: http://www.vishay.com/docs/40074/molded.pdf Performance Characteristics: http://www.vishay.com/docs/40088/perfchar.pdf ORDERING INFORMATION 893D TYPE 106 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow X0 CAPACITANCE TOLERANCE X9 = ± 10 % X0 = ± 20 % 010 DC VOLTAGE RATING AT + 85 °C This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V) B CASE CODE See Ratings and Case Codes Table 2WE3 TERMINATION AND PACKAGING 2TE3: Matte Tin, 7" (178 mm) reel 2WE3: Matte Tin, 13" (330 mm) reel 8T: Tin/Lead, 7" (178 mm) reel 8W: Tin/Lead, 13" (330 mm) reel Note: We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same size. Voltage substitutions will be marked with the higher voltage rating. Effective February 2008, Tin/Lead codes 2T and 2W will no longer be available. Tin/Lead replacement codes are 8T and 8W. Available Matte Tin and Tin/Lead codes are shown in Termination and Packaging ordering information. DIMENSIONS in inches [millimeters] L TW H TH MIN. W P EIA SIZE C D E 6032 - 28 7343 - 31 7343 - 43 L 0.236 ± 0.012 [6.0 ± 0.30] 0.287 ± 0.012 [7.3 ± 0.30] 0.287 ± 0.012 [7.3 ± 0.30] W 0.126 ± 0.012 [3.2 ± 0.30] 0.170 ± 0.012 [4.3 ± 0.30] 0.170 ± 0.012 [4.3 ± 0.30] H 0.098 ± 0.012 [2.5 ± 0.30] 0.110 ± 0.012 [2.8 ± 0.30] 0.158 ± 0.012 [4.0 ± 0.30] P 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] TW 0.087 ± 0.004 [2.2 ± 0.10] 0.095 ± 0.004 [2.4 ± 0.10] 0.095 ± 0.004 [2.4 ± 0.10] TH (MIN.) 0.039 [1.0] 0.039 [1.0] 0.039 [1.0] * Pb containing terminations are not RoHS compliant www.vishay.com 60 For technical questions, contact: tantalum@vishay.com Document Number: 40008 Revision: 08-Feb-08 893D Solid Tantalum Chip Capacitors TANTAMOUNT®, Built-In-Fuse Miniature, Molded-Case RATINGS AND CASE CODES µF 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V C C C C C/D C/D D D/E Vishay Sprague C C D D D/E E C C C C/D C/D D/E D D/E E C C C C/D C/D D/E D D/E E C C C C/D C/D D/E D E C C C C/D D D/E E E D C C C C/D D D/E E C C C C/D D D D/E E CONSTRUCTION AND MARKING Capacitance Voltage Silver Adhesive Epoxy Encapsulation Solderable Cathode Termination Anode Polarity Bar Polarity Band 22 F 10 2 XX Vishay Sprague Logo MnO2/Carbon/Silver Coating Sintered Tantalum Pellet Fusible Wire Lead Frame Solderable Anode Termination Date Code Marking: Capacitors shall be marked with an anode polarity band, capacitance (in microfarads) and the rated DC working voltage 85 °C. The capacitance voltage will be separated by the letter “F” indicating a fused capacitor. Units rated at 6.3 V shall be marked as 6 V. FUSE ACTIVATION TYPICAL CURVE 10 + 1 TIME (s) 0.1 + + 0.01 + + + + + + + + + 0.001 + + + + 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 CURRENT (A) Document Number: 40008 Revision: 08-Feb-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 61 893D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Built-In-Fuse Miniature, Molded-Case RATINGS AND PART NUMBER REFERENCE CAPACITANCE (µF) CASE CODE PART NUMBER MAX. DC LEAKAGE AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) 6 8 8 8 15 8 16 6 6 6 6 6 6 6 8 8 8 8 8 8 6 6 6 6 6 6 6 6 6 8 8 8 8 6 6 6 6 6 6 6 6 6 6 8 MAX. ESR AT+ 25 °C 100 kHz (Ω) 1.4 0.8 0.6 0.6 0.6 0.5 0.5 1.8 1.8 1.4 1.3 0.9 0.8 0.7 0.7 0.7 0.6 0.6 0.5 0.5 1.8 1.8 1.4 1.3 0.9 1.0 0.7 0.7 0.7 0.6 0.6 0.5 0.5 2.0 1.8 1.4 1.3 0.9 1.0 0.7 0.7 0.7 0.6 0.6 MAX. RIPPLE 100 kHz Irms (A) 0.28 0.37 0.50 0.50 0.50 0.57 0.57 0.25 0.25 0.28 0.29 0.41 0.37 0.46 0.46 0.49 0.50 0.50 0.57 0.57 0.25 0.25 0.28 0.29 0.41 0.33 0.46 0.46 0.49 0.50 0.50 0.57 0.57 0.23 0.25 0.28 0.29 0.41 0.33 0.46 0.46 0.49 0.50 0.52 68 100 150 220 330 330 470 15 22 33 47 47 68 68 100 100 150 220 220 330 10 15 22 33 33 47 47 68 68 100 150 150 220 6.8 10 15 22 22 33 33 47 47 68 100 C C D D D E E C C C C D C D D E D D E E C C C C D C D D E D D E E C C C C D C D D E D E 4 VDC AT + 85 °C, 2.7 VDC AT + 125 °C 893D686(1)004C(2) 2.7 893D107(1)004C(2) 4.0 893D157(1)004D(2) 6.0 893D227(1)004D(2) 8.8 893D337(1)004D(2) 13.2 893D337(1)004E(2) 13.2 893D477(1)004E(2) 18.8 6.3 VDC AT + 85 °C, 4 VDC AT + 125 °C 893D156(1)6R3C(2) 0.9 893D226(1)6R3C(2) 1.1 893D336(1)6R3C(2) 1.6 893D476(1)6R3C(2) 2.3 893D476(1)6R3D(2) 2.3 893D686(1)6R3C(2) 3.3 893D686(1)6R3D(2) 3.3 893D107(1)6R3D(2) 4.8 893D107(1)6R3E(2) 6.0 893D157(1)6R3D(2) 9.0 893D227(1)6R3D(2) 13.2 893D227(1)6R3E(2) 13.2 893D337(1)6R3E(2) 19.8 10 VDC AT + 85 °C, 7 VDC AT + 125 °C 893D106(1)010C(2) 1.0 893D156(1)010C(2) 1.5 893D226(1)010C(2) 2.2 893D336(1)010C(2) 3.3 893D336(1)010D(2) 3.3 893D476(1)010C(2) 4.7 893D476(1)010D(2) 4.7 893D686(1)010D(2) 6.8 893D686(1)010E(2) 6.8 893D107(1)010D(2) 10 893D157(1)010D(2) 15.0 893D157(1)010D(2) 15.0 893D227(1)010E(2) 22 16 VDC AT + 85 °C, 10 VDC AT + 125 °C 893D685(1)016C(2) 1.1 893D106(1)016C(2) 1.6 893D156(1)016C(2) 2.4 893D226(1)016C(2) 3.5 893D226(1)016D(2) 3.5 893D336(1)016C(2) 5.3 893D336(1)016D(2) 5.3 893D476(1)016D(2) 7.5 893D476(1)016E(2) 7.5 893D686(1)016D(2) 10.9 893D107(1)016E(2) 16 Notes: (1) Capacitance tolerance: Specify “X9” for 10 % and “X0” for 20 % (2) Termination and packaging: Specify 2TE3 or 2WE3 for lead (Pb)-free and 8T or 8W for Tin/Lead www.vishay.com 62 For technical questions, contact: tantalum@vishay.com Document Number: 40008 Revision: 08-Feb-08 893D Solid Tantalum Chip Capacitors TANTAMOUNT®, Built-In-Fuse Miniature, Molded-Case Vishay Sprague RATINGS AND PART NUMBER REFERENCE CAPACITANCE (µF) CASE CODE PART NUMBER MAX. DC LEAKAGE AT + 25 °C (µA) MAX. DF AT + 25 °C 120 Hz (%) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 4 4 4 6 6 6 6 6 6 6 6 MAX. ESR AT+ 25 °C 100 kHz (Ω) 2.0 1.9 1.6 1.4 0.9 0.7 0.7 0.7 0.6 0.6 2.8 2.3 1.9 1.6 1.4 1.0 0.8 0.7 0.7 0.6 3.8 2.9 2.0 1.8 1.2 1.0 0.8 0.7 0.7 0.6 6.7 5.9 4.4 3.2 2.8 2.1 2.4 1.6 1.1 0.9 0.9 MAX. RIPPLE 100 kHz Irms (A) 0.22 0.24 0.26 0.28 0.41 0.46 0.46 0.49 0.52 0.52 0.21 0.22 0.24 0.26 0.28 0.39 0.43 0.46 0.49 0.52 0.17 0.20 0.23 0.25 0.35 0.39 0.43 0.46 0.49 0.52 0.13 0.14 0.16 0.19 0.20 0.27 0.21 0.31 0.37 0.41 0.43 4.7 6.8 10 15 15 22 33 33 47 68 2.2 3.3 4.7 6.8 10 10 15 22 22 33 1.5 2.2 3.3 4.7 4.7 6.8 10 15 15 22 0.47 0.68 1.0 1.5 2.2 2.2 3.3 3.3 4.7 6.8 6.8 C C C C D D D E E E C C C C C D D D E E C C C C D D D D E E C C C C C D C D D D E 20 VDC AT + 85 °C, 13 VDC AT + 125 °C 893D475(1)020C(2) 0.9 893D685(1)020C(2) 1.4 893D106(1)020C(2) 2.0 893D156(1)020C(2) 3.0 893D156(1)020D(2) 3.0 893D226(1)020D(2) 4.4 893D336(1)020D(2) 6.6 893D336(1)020E(2) 6.6 893D476(1)020E(2) 9.4 893D686(1)020E(2) 13.6 25 VDC AT + 85 °C, 17 VDC AT + 125 °C 893D225(1)025C(2) 0.9 893D335(1)025C(2) 0.8 893D475(1)025C(2) 1.2 893D685(1)025C(2) 1.7 893D106(1)025C(2) 2.5 893D106(1)025D(2) 2.5 893D156(1)025D(2) 3.8 893D226(1)025D(2) 5.5 893D226(1)025E(2) 5.5 893D336(1)025E(2) 8.3 35 VDC AT + 85 °C, 23 VDC AT + 125 °C 893D155(1)035C(2) 0.5 893D225(1)035C(2) 0.8 893D335(1)035C(2) 1.2 893D475(1)035C(2) 1.6 893D475(1)035D(2) 1.6 893D685(1)035D(2) 2.4 893D106(1)035D(2) 3.5 893D156(1)035D(2) 5.3 893D156(1)035E(2) 5.3 893D226(1)035E(2) 7.7 50 VDC AT + 85 °C, 33 VDC AT + 125 °C 893D474(1)050C(2) 0.5 893D684(1)050C(2) 0.5 893D105(1)050C(2) 0.5 893D155(1)050C(2) 0.8 893D225(1)050C(2) 1.1 893D225(1)050D(2) 1.1 893D335(1)050C(2) 1.7 893D335(1)050D(2) 1.7 893D475(1)050D(2) 2.4 893D685(1)050D(2) 3.4 893D685(1)050E(2) 3.4 Notes: (1) Capacitance tolerance: Specify “X9” for 10 % and “X0” for 20 % (2) Termination and packaging: Specify 2TE3 or 2WE3 for lead (Pb)-free and 8T or 8W for Tin/Lead Document Number: 40008 Revision: 08-Feb-08 For technical questions, contact: tantalum@vishay.com www.vishay.com 63 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1