8ETU04PBF_11

VS-8ETU04PbF Vishay Semiconductors Ultrafast Rectifier, 8 A FRED Pt® FEATURES Base cathode 2 • Ultrafast recovery time • Low forward voltage drop • 175 °C operating junction temperature • Low leakage current • Compliant to RoHS Directive 2002/95/EC • Designed and qualified for industrial level TO-220AC 1 Cathode 3 Anode DESCRIPTION/APPLICATIONS FRED Pt® series are the state of the art ultrafast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultrafast recovery time. TO-220AC 8A 400 V 1.3 V See Recovery table 175 °C Single die PRODUCT SUMMARY Package IF(AV) VR VF at IF trr typ. TJ max. Diode variation The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC/DC converters as well as freewheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER Repetitive peak reverse voltage Average rectified forward current Non-repetitive peak surge current Repetitive peak forward current Operating junction and storage temperatures SYMBOL VRRM IF(AV) IFSM IFRM TJ, TStg TC = 155 °C TC = 25 °C TEST CONDITIONS VALUES 400 8 100 16 - 65 to 175 °C A UNITS V ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF IR CT LS IR = 100 μA IF = 8 A IF = 8 A, TJ = 150 °C VR = VR rated TJ = 150 °C, VR = VR rated VR = 400 V Measured lead to lead 5 mm from package body TEST CONDITIONS MIN. 400 TYP. 1.19 0.94 0.2 20 14 8.0 MAX. 1.3 1.0 10 500 μA pF nH V UNITS Reverse leakage current Junction capacitance Series inductance Document Number: 94030 Revision: 28-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETU04PbF Vishay Semiconductors Ultrafast Rectifier, 8 A FRED Pt® DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS IF = 1.0 A, dIF/dt = 50 A/μA, VR = 30 V Reverse recovery time trr TJ = 25 °C TJ = 125 °C Peak recovery current IRRM Qrr TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C IF = 8 A dIF/dt = 200 A/μs VR = 200 V MIN. TYP. 35 43 67 2.8 6.3 60 210 MAX. 60 A ns UNITS Reverse recovery charge nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Thermal resistance, junction to case Thermal resistance, junction to ambient Thermal resistance, case to heatsink Weight Mounting torque Marking device Case style TO-220AC SYMBOL RthJC RthJA RthCS Typical socket mount Mounting surface, flat, smooth and greased TEST CONDITIONS MIN. 6.0 (5.0) TYP. 1.8 0.5 2.0 0.07 8ETU04 MAX. 2 50 12 (10) g oz. kgf · cm (lbf · in) °C/W UNITS For technical questions within your region, please contact one of the following: Document Number: 94030 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 28-Apr-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 2 VS-8ETU04PbF Ultrafast Rectifier, 8 A FRED Pt® Vishay Semiconductors 100 1000 IR - Reverse Current (µA) 100 10 1 0.1 0.01 0.001 0.0001 TJ = 175 °C TJ = 150 °C TJ = 125 °C TJ = 100 °C IF - Instantaneous Forward Current (A) 10 1 TJ = 175 °C TJ = 150 °C TJ = 25 °C TJ = 25 °C 0.1 0 0.5 1.0 1.5 2.0 2.5 0 100 200 300 400 VF - Forward Voltage Drop (V) Fig. 1 - Typical Forward Voltage Drop Characteristics VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 1000 CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 0 100 200 300 400 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 1 PDM t1 t2 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 0.01 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.1 . 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94030 Revision: 28-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETU04PbF Vishay Semiconductors 180 Ultrafast Rectifier, 8 A FRED Pt® 90 80 VR = 200 V TJ = 125 °C TJ = 25 °C Allowable Case Temperature (°C) 170 DC 70 Square wave (D = 0.50) Rated VR applied 150 trr (ns) 160 60 50 40 140 See note (1) 130 0 2 4 6 8 10 12 30 20 100 IF = 16 A IF = 8 A 1000 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 14 dIF/dt (A/µs) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 500 450 400 VR = 200 V TJ = 125 °C TJ = 25 °C IF = 16 A IF = 8 A Average Power Loss (W) 12 10 8 6 4 2 0 0 2 4 6 8 10 12 DC 350 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 Qrr (nC) RMS limit 300 250 200 150 100 50 0 100 1000 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics dIF/dt (A/µs) Fig. 8 - Typical Stored Charge vs. dIF/dt Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR For technical questions within your region, please contact one of the following: Document Number: 94030 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 28-Apr-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 4 VS-8ETU04PbF Ultrafast Rectifier, 8 A FRED Pt® Vishay Semiconductors VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) IF 0 trr ta tb Qrr (2) (4) IRRM 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 94030 Revision: 28-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 5 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-8ETU04PbF Vishay Semiconductors Ultrafast Rectifier, 8 A FRED Pt® ORDERING INFORMATION TABLE Device code VS1 1 2 3 4 4 5 6 8 2 - E 3 T 4 U 5 04 6 PbF 7 Vishay Semiconductors product Current rating (8 = 8 A) E = Single diode Package: T = TO-220 U = Ultrafast recovery Voltage rating (04 = 400 V) PbF = Lead (Pb)-free 7 Tube standard pack quantity: 50 pieces LINKS TO RELATED DOCUMENTS Dimensions Part marking information SPICE model www.vishay.com/doc?95221 www.vishay.com/doc?95224 www.vishay.com/doc?95441 For technical questions within your region, please contact one of the following: Document Number: 94030 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 28-Apr-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 6 Outline Dimensions Vishay Semiconductors TO-220AC DIMENSIONS in millimeters and inches B Seating plane ØP 0.014 M B A M (6) H1 (7) Detail B D1 1 L3 L4 L 23 C E1 (6) Lead assignments Diodes 1 + 2 - Cathode 3 - Anode c e1 0.015 M B A M A2 A Conforms to JEDEC outline TO-220AC θ A A A1 H1 D2 (6) 2 x b2 Detail B 2xb E Thermal pad C C 1 2 D 3 D L1 (6) E E2 (7) Q A (6) D Lead tip View A - A SYMBOL A A1 A2 b b1 b2 b3 c c1 D D1 D2 E MILLIMETERS MIN. 4.25 1.14 2.56 0.69 0.38 1.20 1.14 0.36 0.36 14.85 8.38 11.68 10.11 MAX. 4.65 1.40 2.92 1.01 0.97 1.73 1.73 0.61 0.56 15.25 9.02 12.88 10.51 INCHES MIN. 0.167 0.045 0.101 0.027 0.015 0.047 0.045 0.014 0.014 0.585 0.330 0.460 0.398 MAX. 0.183 0.055 0.115 0.040 0.038 0.068 0.068 0.024 0.022 0.600 0.355 0.507 0.414 NOTES SYMBOL E1 E2 e e1 MILLIMETERS MIN. 6.86 2.41 4.88 6.09 13.52 3.32 1.78 0.76 3.54 2.60 MAX. 8.89 0.76 2.67 5.28 6.48 14.02 3.82 2.13 1.27 3.73 3.00 INCHES MIN. 0.270 0.095 0.192 0.240 0.532 0.131 0.070 0.030 0.139 0.102 MAX. 0.350 0.030 0.105 0.208 0.255 0.552 0.150 0.084 0.050 0.147 0.118 NOTES 6 7 4 H1 L 6, 7 4 L1 L3 2 4 3 L4 ØP Q  2 6 3, 6 90° to 93° 90° to 93° Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3 and c1 apply to base metal only (5) Controlling dimension: inches (6) Thermal pad contour optional within dimensions E, H1, D2 and E1 (7) Dimension E2 x H1 define a zone where stamping and singulation irregularities are allowed (8) Outline conforms to JEDEC TO-220, D2 (minimum) where dimensions are derived from the actual package outline Document Number: 95221 Revision: 07-Mar-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1