8EWF12STRLPBF

8EWF..SPbF Soft Recovery Series Vishay High Power Products Surface Mountable Fast Soft Recovery Diode, 8 A FEATURES/DESCRIPTION Base common cathode + 2 The 8EWF..SPbF fast soft recovery rectifier series has been optimized for combined short reverse recovery time, low forward voltage drop and low leakage current. Available RoHS* COMPLIANT The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. D-PAK 1 Anode 3 - Anode This series is designed and qualified for industrial level and lead (Pb)-free. PRODUCT SUMMARY VF at 8 A trr VRRM < 1.3 V 80 ns 1000/1200 V APPLICATIONS • Output rectification and freewheeling diode in inverters, choppers and converters • Input rectifications where severe restrictions on conducted EMI should be met MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF trr TJ 8 A, TJ = 25 °C 1 A, 100 A/µs Range CHARACTERISTICS Sinusoidal waveform VALUES 8 1000/1200 170 1.3 80 - 40 to 150 UNITS A V A V ns °C VOLTAGE RATINGS PART NUMBER 8EWF10SPbF 8EWF12SPbF VRRM, MAXIMUM PEAK REVERSE VOLTAGE V 1000 1200 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 1100 1300 IRRM AT 150 °C mA 4 ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current Maximum I2t for fusing Maximum I2√t for fusing SYMBOL IF(AV) IFSM I2 t I2 √ t TEST CONDITIONS TC = 94 °C, 180° conduction half sine wave 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied t = 0.1 to 10 ms, no voltage reapplied VALUES 8 170 200 144 200 2000 A2s A2√s A UNITS * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94109 Revision: 08-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 8EWF..SPbF Soft Recovery Series Vishay High Power Products ELECTRICAL SPECIFICATIONS PARAMETER Maximum forward voltage drop Forward slope resistance Threshold voltage Maximum reverse leakage current SYMBOL VFM rt VF(TO) IRM TEST CONDITIONS 8 A, TJ = 25 °C TJ = 150 °C TJ = 25 °C TJ = 150 °C VALUES 1.3 25.6 0.93 VR = Rated VRRM 0.1 4 UNITS V mΩ V mA Surface Mountable Fast Soft Recovery Diode, 8 A RECOVERY CHARACTERISTICS PARAMETER Reverse recovery time Reverse recovery current Reverse recovery charge Snap factor SYMBOL trr Irr Qrr S TEST CONDITIONS IF at 8 Apk 25 A/µs TJ = 25 °C VALUES 270 4.2 1 0.6 UNITS ns A µC di dt Irr IFM ta trr tb Qrr t THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, junction to ambient (PCB mount) Soldering temperature Approximate weight Marking device Case style D-PAK (TO-252AA) SYMBOL TJ, TStg RthJC RthJA (1) TS For 10 seconds DC operation TEST CONDITIONS VALUES - 40 to 150 2.5 °C/W 50 240 1 0.03 8EWF12S °C g oz. UNITS °C Note (1) When mounted on 1" square (650 mm2) PCB of FR-4 or G-10 material 4 oz. (140 µm) copper 40 °C/W For recommended footprint and soldering techniques refer to application note #AN-994 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94109 Revision: 08-Jul-08 8EWF..SPbF Soft Recovery Series Surface Mountable Vishay High Power Products Fast Soft Recovery Diode, 8 A 150 18 8EWF.. S Series RthJC (DC) = 2.5 °C/W 130 120 110 100 90 80 60° 70 90° 60 0 1 2 3 4 5 6 7 8 9 180° 120° 30° Ø Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) 140 16 14 12 10 8 6 4 2 0 0 Conduction angle DC 180° 120° 90° 60° 30° RMS limit Ø Conduction period 8EWF..S Series TJ = 150 °C 2 4 6 8 10 12 14 Average Forward Current (A) Fig. 1 - Current Rating Characteristics Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 150 180 8EWF..S Series RthJC (DC) = 2.5 °C/W 170 At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s Maximum Allowable Case Temperature (°C) 140 130 120 110 100 90 30° 80 70 60 0 2 4 6 60° 90° Peak Half Sine Wave Forward Current (A) 160 150 140 130 120 110 100 90 8EWF..S Series 1 10 Ø Conduction period 120° 180° 8 10 DC 12 14 80 100 Average Forward Current (A) Fig. 2 - Current Rating Characteristics Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 12 Maximum Average Forward Power Loss (W) 10 8 6 4 2 0 0 1 Peak Half Sine Wave Forward Current (A) 180° 120° 90° 60° 30° 200 190 180 170 160 150 140 130 120 110 100 90 9 80 0.01 8EWF..S Series 0.1 1 RMS limit Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied Ø Conduction angle 8EWF..S Series TJ = 150 °C 2 3 4 5 6 7 8 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Document Number: 94109 Revision: 08-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 8EWF..SPbF Soft Recovery Series Vishay High Power Products Instantaneous Forward Current (A) 1000 Surface Mountable Fast Soft Recovery Diode, 8 A 2.0 8EWF..S Series TJ = 25 °C IFM = 10 A Qrr - Maximum Reverse Recovery Charge (µC) TJ = 25 °C TJ = 150 °C 100 1.6 IFM = 8 A 1.2 IFM = 5 A 0.8 IFM = 2 A 0.4 IFM = 1 A 10 8EWF..S Series 1 0.5 0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0 40 80 120 160 200 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 10 - Recovery Charge Characteristics, TJ = 25 °C 0.6 0.5 0.4 0.3 0.2 0.1 0 0 40 80 120 160 200 8EWF..S Series TJ = 25 °C IFM = 10 A IFM = 8 A IFM = 5 A IFM = 2 A IFM = 1 A 5 8EWF..S Series TJ = 150 °C IFM = 10 A Qrr - Maximum Reverse Recovery Charge (µC) trr - Maximum Reverse Recovery Time (µs) 4 3 IFM = 8 A IFM = 5 A IFM = 2 A IFM = 1 A 2 1 0 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25 °C dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 11 - Recovery Charge Characteristics, TJ = 150 °C 0.8 8EWF..S Series TJ = 150 °C 0.6 20 8EWF..S Series TJ = 25 °C IFM = 10 A IFM = 8 A 12 IFM = 5 A 8 IFM = 2 A IFM = 1 A 4 trr - Maximum Reverse Recovery Time (µs) 0.4 0.2 0 0 40 80 120 160 200 Irr - Maximum Reverse Recovery Current (A) IFM = 10 A IFM = 8 A IFM = 5 A IFM = 2 A IFM = 1 A 16 0 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 9 - Recovery Time Characteristics, TJ = 150 °C dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25 °C www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94109 Revision: 08-Jul-08 8EWF..SPbF Soft Recovery Series Surface Mountable Vishay High Power Products Fast Soft Recovery Diode, 8 A 25 8EWF..S Series TJ = 150 °C IFM = 10 A IFM = 8 A IFM = 5 A IFM = 2 A IFM = 1 A Irr - Maximum Reverse Recovery Current (A) 20 15 10 5 0 0 40 80 120 160 200 dI/dt - Rate of Fall of Forward Current (A/µs) Fig. 13 - Recovery Current Characteristics, TJ = 150 °C ZthJC - Transient Thermal Impedance (°C/W) 10 Steady state value (DC operation) 1 Single pulse D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 8EWF..S Series 0.1 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics Document Number: 94109 Revision: 08-Jul-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 8EWF..SPbF Soft Recovery Series Vishay High Power Products Surface Mountable Fast Soft Recovery Diode, 8 A ORDERING INFORMATION TABLE Device code 8 1 1 2 3 4 5 6 7 - E 2 W 3 F 4 12 5 S 6 TR 7 PbF 8 Current rating (8 = 8 A) Circuit configuration: E = Single diode - Package: W = D-PAK Type of silicon: F = Fast soft recovery rectifier Voltage code x 100 = VRRM S = Surface mountable TR = Tape and reel TRR = Tape and reel (right oriented) TRL = Tape and reel (left oriented) 10 = 1000 V 12 = 1200 V 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95016 http://www.vishay.com/doc?95059 http://www.vishay.com/doc?95033 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 94109 Revision: 08-Jul-08 Outline Dimensions Vishay High Power Products D-PAK (TO-252AA) DIMENSIONS in millimeters and inches (5) E b3 Ø2 (3) A 0.010 M C A B L3 (3) 4 B D (5) 1 2 3 L4 Ø1 Seating plane H D1 0.488 (12.40) 0.409 (10.40) A C c2 A Pad layout 0.265 MIN. (6.74) E1 4 0.245 MIN. (6.23) 3 2 1 (2) L5 b b2 2x e Detail “C” c 0.010 M C A B Detail “C” Rotated 90 °CW Scale: 20:1 Lead tip Gauge plane L2 Ø C C L 0.089 MIN. (2.28) A 0.06 MIN. (1.524) 0.093 (2.38) 0.085 (2.18) (L1) H (7) C Seating plane A1 SYMBOL A A1 b b2 b3 c c2 D D1 E E1 Notes (1) (2) (3) (4) (5) MILLIMETERS MIN. 2.18 0.64 0.76 4.95 0.46 0.46 5.97 5.21 6.35 4.32 MAX. 2.39 0.13 0.89 1.14 5.46 0.61 0.89 6.22 6.73 - INCHES MIN. 0.086 0.025 0.030 0.195 0.018 0.018 0.235 0.205 0.250 0.170 MAX. 0.094 0.005 0.035 0.045 0.215 0.024 0.035 0.245 0.265 - NOTES SYMBOL e H L L1 MILLIMETERS MIN. 9.40 1.40 MAX. 10.41 1.78 2.29 BSC INCHES MIN. 0.370 0.055 MAX. 0.410 0.070 0.090 BSC NOTES 2.74 BSC 0.51 BSC 0.89 1.14 0° 0° 25° 1.27 1.02 1.52 10° 15° 35° 0.108 REF. 0.020 BSC 0.035 0.045 0° 0° 25° 0.050 0.040 0.060 10° 15° 35° 2 3 3 L2 L3 L4 5 3 5 3 L5 Ø Ø1 Ø2 Dimensioning and tolerancing as per ASME Y14.5M-1994 Lead dimension uncontrolled in L5 Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body Dimension b1 and c1 applied to base metal only Datum A and B to be determined at datum plane H Outline conforms to JEDEC outline TO-252AA (6) (7) (8) Document Number: 95016 Revision: 04-Nov-08 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1