B350A

New Product B350A & B360A Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • Low profile package • Ideal for automated placement • Low forward voltage drop, low power losses • High efficiency • High surge capability DO-214AC (SMA) • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. MECHANICAL DATA Case: DO-214AC (SMA) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes the cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF at IF = 3.0 A TJ max. 3A 50 V, 60 V 50 A 0.55 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Voltage rate of change (rated VR) Operating junction temperature range VRRM IF(AV) IFSM dV/dt TJ, TSTG SYMBOL B350A B35 50 3.0 50 10 000 - 55 to + 150 B360A B36 60 UNIT V V A A V/µs °C Document Number: 89071 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product B350A & B360A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum reverse current (2) Typical junction capacitance TEST CONDITIONS IF = 3.0 A rated VR 4.0 V, 1 MHz TA = 25 °C TA = 125 °C TA = 25 °C TA = 125 °C SYMBOL VF IR CJ TYP. 0.64 0.55 2.9 145 MAX. 0.72 0.62 200 10 UNIT V µA mA pF Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) SYMBOL RθJA RθJL B350A 72 12 B360A UNIT °C/W Note: (1) P.C.B. mounted with 0.32 x 0.32" (8 x 8 mm) copper pad areas. TL measure at lead terminal mount. ORDERING INFORMATION (Example) PREFERRED P/N B360A-E3/61T B360A-E3/5AT UNIT WEIGHT (g) 0.064 0.064 PREFERRED PACKAGE CODE 61T 5AT BASE QUANTITY 1800 7500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3.0 Resistive or Inductive Load 2.5 D = 0.3 D = 0.5 D = 0.8 Average Forward Current (A) 2.5 Average Power Loss (W) 2.0 D = 0.2 1.5 D = 0.1 D = 1.0 1.0 T 0.5 D = tp/T 0 tp 3.0 3.5 2.0 1.5 1.0 P. C. B. Mounted on 0.32 x 0.32" (8 x 8 mm) Copper Pad Areas 80 90 120 130 140 150 0.5 0 100 110 0 0.5 1.0 1.5 2.0 Lead Temperature (°C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89071 Revision: 19-May-08 New Product B350A & B360A Vishay General Semiconductor 100 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) TA = 125 °C 10 TA = 150 °C Junction Capacitance (pF) 100 1 TA = 25 °C 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 10 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 000 Instantaneous Reverse Current (µA) 10 000 TA = 150 °C TA = 125 °C 1000 100 10 TA = 25 °C 1 0.1 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.066 (1.68) MIN. 0.074 (1.88) MAX. 0.065 (1.65) 0.049 (1.25) 0.110 (2.79) 0.100 (2.54) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 89071 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1