BA779-2-V-GH

BA779-2-V-GH Vishay Semiconductors RF PIN Diodes - Dual Series Features • Wide frequency range 10 MHz to 1 GHz • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Find out more about Vishay’s Automotive Grade Product requirements at: www.vishay.com/applications 3 1 2 18109 Applications • Current controlled HF resistance in adjustable attenuators Mechanical Data Case: SOT-23 Weight: approx. 8.1 mg Packaging codes/options: 18/10 k per 13" reel (8 mm tape), 10 k/box 08/3 k per 7" reel (8 mm tape), 15 k/box Parts Table Part BA779-2-V-GH Ordering code BA779-2-V-GH-18 or BA779-2-V-GH-08 Type Marking PH2 Remarks Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Reverse voltage Forward continuous current Test condition Symbol VR IF Value 30 50 Unit V mA Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range Test condition on PC board 50 mm x 50 mm x 1.6 mm Symbol RthJA Tj Tstg Value 500 125 - 55 to + 125 Unit K/W °C °C ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number 83322 For technical questions within your region, please contact one of the following: Rev. 1.0, 22-Apr-10 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 BA779-2-V-GH Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage Reverse current Diode capacitance Differential forward resistance Reverse impedance Minority carrier lifetime Test condition IF = 20 mA V R = 30 V f = 100 MHz, VR = 0 f = 100 MHz, IF = 1.5 mA f = 100 MHz, VR = 0 IF = 10 mA, IR = 10 mA Symbol VF IR CD rf zr τ 5 4 Min. Typ. Max. 1000 50 0.5 50 Unit mV nA pF Ω kΩ µs Typical Characteristics Tamb = 25 °C, unless otherwise specified a - Typical Cross Modulation Distortion (dB) 100 20 Π - Circuit with 10 dB Attenuation V 0 = 40 dBmV f 1 = 100 MHz unmodulated - 20 IF - Forward Current (mA) 10 0 Tamb = 25 °C 1 - 40 - 60 - 80 0 20 40 60 80 f 2 , modulated with 200 kHz, m = 100 % (MHz) Scattering Limit 0.1 0.01 0 95 9735 0.4 0.8 1.2 1.6 2.0 VF - Forward Voltage (V) 95 9733 Figure 1. Forward Current vs. Forward Voltage Figure 3. Typ. Cross Modulation Distortion vs. Frequency f2 rf - Differential Forward Resistance (Ω) 10 000 1000 100 f > 20 MHz Tj = 25 °C 10 1 0.001 0.01 0.1 1 10 95 9734 IF - Forward Current (mA) Figure 2. Differential Forward Resistance vs. Forward Current www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number 83322 Rev. 1.0, 22-Apr-10 BA779-2-V-GH Vishay Semiconductors Package Dimensions in millimeters (inches): SOT-23 1.15 (0.045) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 0.9 (0.035) o8 0° t ° 0.1 (0.004) max. 3.1 (0.122) 2.8 (0.110) 0.550 ref. (0.022 ref.) 0.175 (0.007) 0.098 (0.004) 0.2 (0.008) 0.5 (0.020) 0.3 (0.012) 2 (0.079) 0.95 (0.037) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 1.43 (0.056) 0.35 (0.014) 1.20 (0.047) Foot print recommendation: 1 (0.039) 0.9 (0.035) 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Document Number 83322 Rev. 1.0, 22-Apr-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1