BAQ133_12

BAQ133, BAQ134, BAQ135 Vishay Semiconductors Small Signal Switching Diodes, Low Leakage Current Features • Silicon Planar Diodes • Very low reverse current • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Applications Protection circuits, time delay circuits, peak follower circuits, logarithmic amplifiers 9612009 Mechanical Data Case: QuadroMELF SOD-80 Weight: approx. 34 mg Cathode band color: black Packaging codes/options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part BAQ133 BAQ134 BAQ135 Type differentiation VRRM = 40 V VRRM = 70 V VRRM = 140 V Ordering code BAQ133-GS18 or BAQ133-GS08 BAQ134-GS18 or BAQ134-GS08 BAQ135-GS18 or BAQ135-GS08 Remarks Tape and Reel Tape and Reel Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Reverse voltage Test condition Part BAQ133 BAQ134 BAQ135 Peak forward surge current Forward current tp = 1 µ s Symbol VR VR VR IFSM IF Value 30 60 125 2 200 Unit V V V A mA Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range Test condition On PC board 50 mm x 50 mm x 1.6 mm Symbol RthJA Tj Tstg Value 500 175 - 65 to + 175 Unit K/W °C °C Document Number 85536 Rev. 1.8, 20-Aug-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 BAQ133, BAQ134, BAQ135 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage Test condition IF = 100 mA E ≤ 300 lx, rated VR E ≤ 300 lx, rated VR, Tj = 125 °C Reverse current E ≤ 300 lx, VR = 15 V E ≤ 300 lx, VR = 30 V E ≤ 300 lx, VR = 60 V Breakdown voltage Diode capacitance IR = 5 μA, tp/T = 0.01, tp = 0.3 ms VR = 0, f = 1 MHz BAQ133 BAQ134 BAQ135 BAQ133 BAQ134 BAQ135 Part Symbol VF IR IR IR IR IR V(BR) V(BR) V(BR) CD 40 70 140 3 0.5 0.5 0.5 1 Min. Typ. Max. 1 3 0.5 1 1 1 Unit V nA μA nA nA nA V V V pF Typical Characteristics Tamb = 25 °C, unless otherwise specified 10000 V R = VRRM I R - Reverse Current (nA) 1000 Scattering Limit 100 10 1 0 94 9079 40 80 120 160 200 Tj - Junction Temperature (°C) Figure 1. Reverse Current vs. Junction Temperature 1000 Tj = 25 °C 100 Scattering Limit 10 I F - Forward Current (mA) 1 0.1 0 94 9078 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Figure 2. Forward Current vs. Forward Voltage www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85536 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.8, 20-Aug-10 BAQ133, BAQ134, BAQ135 Vishay Semiconductors Package Dimensions in millimeters (inches): QuadroMELF SOD-80 1.6 (0.063) 1.4 (0.055) > R3 (R0.118) glass 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 1.25 (0.049) min. 2.5 (0.098) max. (0 .0 gl as 67) s Cathode identification 1. 7 5 (0.197) ref. 96 12071 Document Number 85536 Rev. 1.8, 20-Aug-10 2 (0.079) min. For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000