BAS19-V_12

BAS19-V, BAS20-V, BAS21-V Vishay Semiconductors Small Signal Switching Diodes, High Voltage Features • Silicon epitaxial planar diode • Fast switching diode in case SOT-23, especially suited for automatic insertion. • These diodes are also available in other case styles including: the SOD-123 case with the type designations BAV19W-V to BAV21W-V, the Mini-MELF case with the type designation BAV101 to BAV103, the DO-35 case with the type designations BAV19-V to BAV21-V and the SOD-323 case with type designation BAV19WS-V to BAV21WS-V. • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 3 1 16923 2 Mechanical Data Case: SOT-23 Weight: approx. 8.8 mg Packaging codes/options: GS18/10K per 13" reel (8 mm tape), 10K/box GS08/3K per 7" reel (8 mm tape), 15K/box Parts Table Part BAS19-V BAS20-V BAS21-V Type differentiation VRRM = 120 V VRRM = 200 V VRRM = 250 V Ordering code BAS19-V-GS18 or BAS19-V-GS08 BAS20-V-GS18 or BAS20-V-GS08 BAS21-V-GS18 or BAS21-V-GS08 Marking A8 A81 A82 Remarks Tape and reel Tape and reel Tape and reel Document Number 85540 Rev. 1.7, 10-Nov-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 BAS19-V, BAS20-V, BAS21-V Vishay Semiconductors Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Continuous reverse voltage Test condition Part BAS19-V BAS20-V BAS21-V BAS19-V Repetitive peak reverse voltage Non-repetitive peak forward current Non-repetitive peak forward surge current Maximum average forward rectified current DC forward current Repetitive peak forward current Power dissipation 1) 2) Symbol VR VR VR VRRM VRRM VRRM IFSM IFSM IF(AV) IF IFRM Ptot Value 100 150 200 120 200 250 2.5 0.5 200 1) 200 2) 625 250 2) Unit V V V V V V A A mA mA mA mW BAS20-V BAS21-V t = 1 µs t=1s (av. over any 20 ms period) Measured under pulse conditions; Pulse time = Tp ≤ 0.3 ms Device on fiberglass substrate, see layout on next page Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range 1) Test condition Symbol RthJA Tj Tstg Value 430 1) Unit °C °C °C 150 - 65 to + 150 Device on fiberglass substrate, see layout on next page Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage Leakage current Dynamic forward resistance Diode capacitance Reverse recovery time Test condition IF = 100 mA IF = 200 mA VR = VRmax. VR = VRmax., Tj = 150 °C IF = 10 mA VR = 0, f = 1 MHz IF = IR = 30 mA, RL = 100 Ω, Irr = 3 mA Symbol VF VF IR IR rf Ctot trr 5 5 50 Min. Typ. Max. 1.0 1.25 100 100 Unit V V nA μA Ω pF ns www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85540 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.7, 10-Nov-10 BAS19-V, BAS20-V, BAS21-V Vishay Semiconductors Test Circuit and Waveforms Ω Ω Test circuit Input Signal total pulse duration duty factor rise time of reverse pulse reverse pulse duration tp(tot) = 2 µs δ = 0.0025 tr = 0.6ns tp = 100ns tr = 0.35ns C < 1pF Input signal Waveforms; IR = 3 m A Oscilloscope - rise time - cicuit capitance* *C = oscilloscope input capactitance + parasitic capacitance 18098 Output signal Layout for RthJA test Thickness: Fiberglass 1.5 mm (0.059 in.) Copper leads 0.3 mm (0.012 in.) 7.5 (0.3) 3 (0.12) 1 (0.4) 12 (0.47) 15 (0.59) 0.8 (0.03) 2 (0.8) 1 (0.4) 2 (0.8) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 Document Number 85540 Rev. 1.7, 10-Nov-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 BAS19-V, BAS20-V, BAS21-V Vishay Semiconductors Package Dimensions in millimeters (inches): SOT-23 1.15 (0.045) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.550 ref. (0.022 ref.) 0.1 (0.004) max. 0.175 (0.007) 0.098 (0.004) 0.2 (0.008) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.3 (0.012) 0.45 (0.018) 1.43 (0.056) 0.35 (0.014) 1.20 (0.047) Foot print recommendation: 1 (0.039) 0.9 (0.035) 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number 85540 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.7, 10-Nov-10 2 (0.079) 0.95 (0.037) 0° t o 0.5 (0.020) 8° Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000