BAS286_10

BAS286 Vishay Semiconductors Small Signal Schottky Diode Features • Integrated protection ring against static discharge • Very low forward voltage • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 9612009 Applications • Applications where a very low forward voltage is required Mechanical Data Case: QuadroMELF SOD-80 Weight: approx. 34 mg Cathode band color:black Packaging codes/options: GS18/10 k per 13" reel (8 mm tape), 10 k/box GS08/2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part BAS286 Ordering code BAS286-GS18 or BAS286-GS08 Type Marking Remarks Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Reverse voltage Peak forward surge current Repetitive peak forward current Forward continuous current Average forward current tp = 10 ms tp ≤ 1 s Test condition Symbol VR IFSM IFRM IF IFAV Value 50 5 500 200 200 Unit V A mA mA mA Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range Test condition on PC board 50 mm x 50 mm x 1.6 mm Symbol RthJA Tj Tstg Value 320 125 - 65 to + 150 Unit K/W °C °C Document Number 85502 Rev. 1.8, 05-Aug-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 BAS286 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition IF = 0.1 mA IF = 1 mA Forward voltage IF = 10 mA IF = 30 mA IF = 100 mA Reverse current Diode capacitance V R = 40 V VR = 1 V, f = 1 MHz Symbol VF VF VF VF VF IR CD Min Typ. Max 300 380 450 600 900 5 8 Unit mV mV mV mV mV µA pF Typical Characteristics Tamb = 25 °C, unless otherwise specified P - Reverse Power Dissipation (mW) R 500 450 400 350 300 250 200 150 100 50 0 25 0.1 50 75 100 125 150 15829 1000 VR = 50 V Tj = 125 °C IF - Forward Current (A) 100 Tj = 25 °C 10 PR - Limit at 100 % VR R thJA = 540 K/W PR - Limit at 80 % VR 1 0 0.5 1.0 1.5 15827 Tj - Junction Temperature (°C) V F - Forward Voltage (V) Figure 1. Max. Reverse Power Dissipation vs. Junction Temperature Figure 3. Forward Current vs. Forward Voltage 10000 C D - Diode Capacitance (pF) V R = V RRM I R - Reverse Current (µA) 1000 10 9 8 7 6 5 4 3 2 1 0 50 75 100 125 150 15830 f = 1 MHz 100 10 1 25 15828 0.1 1 10 100 Tj - Junction Temperature (°C) V R - Reverse Voltage (V) Figure 2. Reverse Current vs. Junction Temperature Figure 4. Diode Capacitance vs. Reverse Voltage www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85502 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.8, 05-Aug-10 BAS286 Vishay Semiconductors Package Dimensions in millimeters (inches): QuadroMELF SOD-80 1.6 (0.063) 1.4 (0.055) > R3 (R0.118) glass 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 1.25 (0.049) min. 2.5 (0.098) max. 1. 7 (0 .0 gl as 67) s Cathode identification 5 (0.197) ref. 96 12071 Document Number 85502 Rev. 1.8, 05-Aug-10 2 (0.079) min. For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1