BAT41_10

BAT41 Vishay Semiconductors Small Signal Schottky Diode Features • For general purpose applications • This diode features low turn-on voltage and high breakdown voltage. This device is protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • This diode is also available in a MiniMELF case with type designation LL41 • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition 94 9367 Mechanical Data Case: DO-35 Weight: approx. 125 mg Cathode Band Color: black Packaging Codes/Options: TR/10 k per 13" reel (52 mm tape), 50 k/box TAP/10 k per Ammopack (52 mm tape), 50 k/box Parts Table Part BAT41 / Ordering code BAT41-TR or BAT41-TAP Type Marking BAT41 Remarks Tape and Reel/Ammopack Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Repetitive peak reverse voltage Forward continuous current Repetitive peak forward current Surge forward current Power dissipation 1) Test condition Symbol VRRM IF Value 100 1001) 3501) 7501) 200 1) Unit V mA mA mA mW tp < 1 s, δ < 0.5 tp = 10 ms Tamb = 65 °C IFRM IFSM Ptot Valid provided that electrodes are kept at ambient temperature Document Number 85659 Rev. 1.6, 12-Aug-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 BAT41 Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Ambient operating temperature range Storage temperature range 1) Test condition Symbol RthJA Tj Tamb Tstg Value 3001) 125 - 65 to + 125 - 65 to + 150 Unit K/W °C °C °C Valid provided that electrodes are kept at ambient temperature Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Reverse breakdown voltage2) Leakage current2) Forward voltage2) Diode capacitance 2) Test condition IR = 100 µA VR = 50 V, Tj = 25 °C VR = 50 V, Tj = 100 °C IF = 1 m A IF = 200 mA VR = 1 V, f = 1 MHz Symbol V(BR) IR IR VF VF CD Min. 100 Typ. 110 Max. 100 20 Unit V nA µA mV mV pF 400 2 450 1000 Pulse test, tp = 300 µs Typical Characteristics Tamb = 25 °C, unless otherwise specified 250 IR - Reverse Leakage Current (nA) 100000 Tj = 125 °C Ptot- Power Dissipation (mW) 200 150 100 10000 100 °C 75 °C 50 °C 1000 100 25 °C 50 10 1 0 0 20225 50 100 Tamb - Ambient Temperature (°C) 150 20226 0 10 20 30 40 50 60 70 80 90 100 VR - Reverse Voltage (V) Figure 1. Admissible Power Dissipation vs. Ambient Temperature Figure 2. Typical Reverse Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85659 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.6, 12-Aug-10 BAT41 Vishay Semiconductors 1000 100 T j = 125 ° C 10 1 - 40 °C 0.1 0.01 0 18641 5.0 4.5 CD - Diode Capacitance (pF) I F - Forward Current (mA) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 40 25 ° C 200 400 600 800 1000 1200 20227 VF - Forward Voltage (mV) VR - Reverse Voltage (V) Figure 3. Typical Forward Characteristics Figure 4. Typical Capacitance vs. Reverse Voltage Package Dimensions in millimeters (inches): DO-35 Cathode identification 0.55. (0.022) max 26 (1.024) min. 3.9 (0.154) max. 26 (1.024) min. Rev. 6 - Date: 29. January 2007 Document no.: 6.560-5004.02-4 94 9366 Document Number 85659 Rev. 1.6, 12-Aug-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1.7 (0.067) www.vishay.com 3 1.5 (0.059) DO35 Vishay Semiconductors DO35 Package Dimensions in mm (Inches) Cathode Identification 0.55 max. (0.022) 1.7 (0.067) Rev. 6 - Date: 29. January 2007 Document no.: 6.560-5004.02-4 94 9366 Document Number 84001 Rev. 1.3, 12-Feb-07 www.vishay.com 1 1.5 (0.059) 26 min. (1.024) 3.9 max. (0.154) 26 min. (1.024) DO35 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 2 Document Number 84001 Rev. 1.3, 12-Feb-07 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1