BAV100

BAV100/101/102/103 Vishay Semiconductors Small Signal Switching Diodes, High Voltage Features • Silicon Epitaxial Planar Diodes • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC e2 Applications • General purposes 94 9371 Mechanical Data Case: MiniMELF Glass case (SOD80) Weight: approx. 31 mg Cathode Band Color: Black Packaging Codes/Options: GS18/10 k per 13" reel (8 mm tape), 10 k/box GS08/2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part BAV100 BAV101 BAV102 BAV103 Type differentiation VRRM = 60 V VRRM = 120 V VRRM = 200 V VRRM = 250 V Ordering code BAV100-GS18 or BAV100-GS08 BAV101-GS18 or BAV101-GS08 BAV102-GS18 or BAV102-GS08 BAV103-GS18 or BAV103-GS08 Type Marking Remarks Tape and Reel Tape and Reel Tape and Reel Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Repetitive peak reverse voltage Test condition Part BAV100 BAV101 BAV102 BAV103 Reverse voltage BAV100 BAV101 BAV102 BAV103 Peak forward surge current Repetitive peak forward current Forward continuous current Power dissipation tp = 1 s Symbol VRRM VRRM VRRM VRRM VR VR VR VR IFSM IFRM IF Ptot Value 60 120 200 250 50 100 150 200 1 625 250 500 Unit V V V V V V V V A mA mA mW Document Number 85542 Rev. 1.6, 13-Feb-07 www.vishay.com 1 BAV100/101/102/103 Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Junction lead Thermal resistance junction to ambient air Junction temperature Storage temperature range on PC board 50 mm x 50 mm x 1.6 mm Test condition Symbol RthJL RthJA Tj Tstg Value 350 500 175 - 65 to + 175 Unit K/W K/W °C °C Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage Reverse current Test condition IF = 100 mA V R = 50 V VR = 100 V VR = 150 V VR = 200 V Tj = 100 °C, VR = 50 V Tj = 100 °C, VR = 100 V Tj = 100 °C, VR = 150 V Tj = 100 °C, VR = 200 V Breakdown voltage IR = 100 µA, tp/T = 0.01, tp = 0.3 ms IR=100 µA, tp/T = 0.01, tp = 0.3 ms IR = 100 µA, tp/T = 0.01, tp = 0.3 ms Diode capacitance Differential forward resistance Reverse recovery time VR = 0, f = 1 MHz IF = 10 mA IF = IR = 30 mA, iR = 3 mA, RL = 100 Ω BAV100 BAV101 BAV102 BAV103 BAV100 BAV101 BAV102 BAV103 BAV100 BAV101 BAV102 BAV103 Part Symbol VF IR IR IR IR IR IR IR IR V(BR) V(BR) V(BR) V(BR) CD rf trr 60 120 200 250 1.5 5 50 Min Typ. Max 1000 100 100 100 100 15 15 15 15 Unit mV nA nA nA nA µA µA µA µA V V V V pF Ω ns Typical Characteristics Tamb = 25 °C, unless otherwise specified 1000 100 Scattering Limit 10 I F - Forward Current (mA) 1000 Tj = 25 °C I R - Reverse Current (µA) 100 Scattering Limit 10 1 VR = VRRM 1 0.1 0.01 0 40 80 120 0.1 160 200 94 9085 0 0.4 0.8 1.2 1.6 2.0 94 9084 Tj - Junction Temperature (°C) V F - Forward Voltage (V) Figure 1. Reverse Current vs. Junction Temperature Figure 2. Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85542 Rev. 1.6, 13-Feb-07 BAV100/101/102/103 Vishay Semiconductors rf - Differential Forward Resistance (Ω) 1000 100 Tj = 25 °C 10 1 0.1 1 10 100 94 9089 I F - Forward Current (mA) Figure 3. Differential Forward Resistance vs. Forward Current Package Dimensions in millimeters (inches): SOD80 96 12070 Document Number 85542 Rev. 1.6, 13-Feb-07 www.vishay.com 3 BAV100/101/102/103 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85542 Rev. 1.6, 13-Feb-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1