BAV201

BAV200, BAV201, BAV202, BAV203 Vishay Semiconductors Small Signal Switching Diodes, High Voltage Features • Silicon epitaxial planar diodes • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Applications • General purposes 9612009 Mechanical Data Case: QuadroMELF SOD-80 Weight: approx. 34 mg Cathode band color: black Packaging codes/options: GS18/10 k per 13" reel (8 mm tape), 10 k/box GS08/2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part BAV200 BAV201 BAV202 BAV203 Type differentiation VRRM = 60 V VRRM = 120 V VRRM = 200 V VRRM = 250 V Ordering code BAV200-GS18 or BAV200-GS08 BAV201-GS18 or BAV201-GS08 BAV202-GS18 or BAV202-GS08 BAV203-GS18 or BAV203-GS08 Type marking Remarks Tape and reel Tape and reel Tape and reel Tape and reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Part BAV200 Peak reverse voltage BAV201 BAV202 BAV203 BAV200 Reverse voltage BAV201 BAV202 BAV203 Forward continuous current Peak forward surge current Forward peak current Power dissipation tp = 1 s, Tj = 25 °C f = 50 Hz Symbol VRRM VRRM VRRM VRRM VR VR VR VR IF IFSM IFM Ptot Value 60 120 200 250 50 100 150 200 250 1 625 500 Unit V V V V V V V V mA A mA mW Document Number 85544 Rev. 1.7, 20-Aug-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 BAV200, BAV201, BAV202, BAV203 Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Junction temperature Storage temperature range Test condition On PC board 50 mm x 50 mm x 1.6 mm Symbol RthJA Tj Tstg Value 500 175 - 65 to + 175 Unit K/W °C °C Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage Test condition IF = 100 mA V R = 50 V VR = 100 V VR = 150 V Reverse current VR = 200 V Tj = 100 °C, VR = 50 V Tj = 100 °C, VR = 100 V Tj = 100 °C, VR = 150 V Tj = 100 °C, VR = 200 V IR = 100 μA, tp/T = 0.01, tp = 0.3 ms VR = 0, f = 1 MHz IF = 10 mA IF = IR = 30 mA, iR = 3 mA, RL = 100 Ω BAV200 BAV201 BAV202 BAV203 BAV200 BAV201 BAV202 BAV203 BAV200 Breakdown voltage BAV201 BAV202 BAV203 Diode capacitance Differential forward resistance Reverse recovery time Part Symbol VF IR IR IR IR IR IR IR IR V(BR) V(BR) V(BR) V(BR) CD rf trr 60 120 200 250 1.5 5 50 Min. Typ. Max. 1000 100 100 100 100 15 15 15 15 Unit mV nA nA nA nA μA μA μA μA V V V V pF Ω ns Typical Characteristics Tamb = 25 °C, unless otherwise specified 1000 100 Scattering Limit 10 1000 Tj = 25 °C I R - Reverse Current (µA) I F - Forward Current (mA) 100 Scattering Limit 10 1 VR = VRRM 0.1 0.01 0 40 80 120 1 0.1 160 200 94 9085 0 0.4 0.8 1.2 1.6 2.0 94 9084 Tj - Junction Temperature (°C) V F - Forward Voltage (V) Figure 1. Reverse Current vs. Junction Temperature Figure 2. Forward Current vs. Forward Voltage www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85544 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.7, 20-Aug-10 BAV200, BAV201, BAV202, BAV203 Vishay Semiconductors rf - Differential Forward Resistance (Ω) 1000 100 Tj = 25 °C 10 1 0.1 1 10 100 94 9089 I F - Forward Current (mA) Figure 3. Differential Forward Resistance vs. Forward Current Package Dimensions in millimeters (inches): QuadroMELF SOD-80 (0 1. 1.6 (0.063) 1.4 (0.055) 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 1.25 (0.049) min. 2.5 (0.098) max. .0 > R3 (R0.118) glass gl as 7 s 67 Cathode identification ) 5 (0.197) ref. 96 12071 Document Number 85544 Rev. 1.7, 20-Aug-10 2 (0.079) min. For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000