BFC233913

MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES l 168x12(halfpage) h lt P Ø dt F' F 10 15 w l h h' (1) H Ø dt w 7.5 to 27.5 mm lead pitch. Supplied loose in box, taped on ammopack or reel RoHS compliant product RATED VOLTAGE AC 310 V; 50 to 60 Hz Dimensions in mm (1) ⎪F - F’⎪ < 0.3 mm F = 7.5 + 0.6/- 0.1 mm PERMISSIBLE DC VOLTAGE DC 630 V APPLICATIONS For standard across the line X2 applications. See also application note: www.vishay.com/docs/28153/anaccaps.pdf ENCAPSULATION Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 CLIMATIC TESTING CLASS ACC. TO IEC 60068-1 REFERENCE STANDARDS “IEC 60384-14 ed-3 and EN 60384-14 “IEC 60065, pass. flamm. class B” CSA-C22.2 No. 1; UL1414 CSA-E384-14; UL1283; CQC 55/110/56/B CAPACITANCE RANGE (E12 SERIES) E12 series 0.001 to 4.7 µF Preferred values acc. to E6 MARKING C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation; code for dielectric material, manufacturer location; manufacturer’s logo; year and week; safety approvals CAPACITANCE TOLERANCE ± 20 %; ± 10 %; ± 5 % LEADS Tinned wire DIELECTRIC Polypropylene film MAXIMUM APPLICATION TEMPERATURE C ≤ 470 nF: 110 °C (125 °C for less than 1000 h) C > 470 nF: 110 °C ELECTRODES Metallized film DETAIL SPECIFICATION For more detailed data and test requirements contact: RFI@vishay.com CONSTRUCTION Mono construction Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 1 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES 7.5 mm 7.5 mm (bent back) 339 X2 10.0 mm 15.0 mm 22.5 mm 27.5 mm Example: CAPACITANCE (numerically) MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5 104 = 10 x 10 = 100 nF BFC2 339 2222(*) 339 (*) old ordering code TYPE PACKAGING Loose in box XX XX X XX XX X C-TOL CODE NUMBER BFC2 339 20... BFC2 339 22... BFC2 339 24... BFC2 339 26... BFC2 339 28... BFC2 339 56... BFC2 339 58... BFC2 339 10... BFC2 339 12... BFC2 339 14... BFC2 339 16... BFC2 339 18... BFC2 339 66... BFC2 339 68... BFC2 339 50... BFC2 339 52... BFC2 339 54... BFC2 339 36... BFC2 339 38... BFC2 339 76... BFC2 339 78... CODE NUMBER BFC2 339 21... BFC2 339 23... BFC2 339 25... BFC2 339 27... BFC2 339 11... BFC2 339 13... BFC2 339 15... BFC2 339 17... BFC2 339 51... BFC2 339 53... BFC2 339 55... BFC2 339 46... BFC2 339 48... Taped (1) Loose in box Taped (1) Loose in box 339 X2 Taped (1) PACKAGING Loose in box Taped (1) Loose in box Taped (1) Loose in box Taped (1) STANDARD DIMENSIONS Lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm Lead length 5.0 ± 1.0 mm Lead length 25.0 ± 2.0 mm Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm Ammopack: H = 18.5 mm; P0 = 12.7 mm Reel: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm Lead length 5.0 ± 1.0 mm Lead length 25.0 ± 2.0 mm Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm Ammopack: H = 18.5 mm; P0 = 12.7 mm Reel: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm Lead length 5.0 ± 1.0 mm Llead length 25.0 ± 2.0 mm Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm Ammopack: H = 18.5 mm; P0 = 12.7 mm Reel: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm Ammopack: pitch 7.5 mm (bent back), H = 16.0 mm; P0 = 15.0 mm ALTERNATIVE LARGER PITCH SIZES Lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm Lead length 5.0 ± 1.0 mm Lead length 25.0 ± 2.0 mm Reel or ammopack: H = 18.5 mm; P0 = 12.7 mm Lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm Lead length 5.0 ± 1.0 mm Lead length 25.0 ± 2.0 mm Reel or ammopack: H = 18.5 mm; P0 = 12.7 mm Lead length 3.5 + 1/- 0.5 mm or 3.5 ± 0.3 mm Lead length 5.0 ± 1.0 mm Lead length 25.0 ± 2.0 mm Reel: H = 18.5 mm; P0 = 12.7 mm or 15.0 mm Ammopack: H = 18.5 mm; P0 = 12.7 mm ± 20 % ± 10 % ±5% C-TOL ± 20 % ± 10 % ±5% Notes (1) For detailed tape specification refer to Packaging Information: www.vishay.com/docs/28139/packinfo.pdf (2) SPQ = Standard Packaging Quantity www.vishay.com 2 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type SPECIFIC REFERENCE DATA DESCRIPTION Rated AC voltage (URac) Permissible DC voltage (URdc) Tangent of loss angle: C < 470 nF 470 nF ≤ C ≤ 1 µF C > 1 µF Rated voltage pulse slope (dU/dt)R at 435 Vdc R between leads, for C ≤ 0.33 µF at 100 V; 1 min RC between leads, for C > 0.33 µF at 100 V; 1 min R between leads and case; 100 V; 1 min Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s: C ≤ 1 µF C > 1 µF Withstanding (AC) voltage between leads and case Max. application temperature for 0.001 µF ≤ C ≤ 0.47 µF Max. application temperature for C > 0.47 µF 2200 V; 1 min 1800 V; 1 min 2120 V; 1 min 110 °C (125 °C for less than 1000 h) 110 °C at 1 kHz ≤ 10 x 10-4 ≤ 20 x 10-4 ≤ 30 x 10-4 100 V/µs > 15 000 MΩ > 5000 s > 30 000 MΩ VALUE 310 V 630 V at 10 kHz ≤ 20 x 10-4 ≤ 70 x 10-4 - Vishay BCcomponents Pitch: 7.5 mm; C-tol = 20 % CATALOG NUMBER BFC2 339..... AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (2) Short leads It = 3.5 + 1/- 0.5 mm Pitch = 7.5 ± 0.4 mm; dt = 0.50 ± 0.05 mm 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 Notes (1) H AMMOPACK (1) Long leads H = 18.5 mm P0 = 12.7 mm SPQ SPQ It = 5.0 ± 1.0 mm SPQ It = 25.0 ± 2.0 mm 20102 20152 20222 20332 20472 4.0 x 9.0 x 10.0 0.4 20682 20103 20153 20223 20333 5.0 x 10.5 x 10.0 6.0 x 11.5 x 10.0 0.4 0.8 20473 20683 22102 22152 22222 22332 22472 22682 22103 22153 22223 22333 22473 22683 1000 750 1500 24102 24152 24222 24332 24472 24682 24103 24153 24223 24333 24473 24683 1250 1000 1000 28102 28152 28222 28332 28472 28682 28103 28153 28223 28333 28473 28683 1000 750 1250 = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information for short lead product only (2) Weight Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 3 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 7.5 mm bent back (only taped); C-tol = ± 20 % CATALOG NUMBER BFC2 339..... AND PACKAGING C (µF) DIMENSIONS w x h’ x l (mm) LOOSE IN BOX MASS (g) (2) AMMOPACK H = 16.0 mm P0 = 15.0 mm 1.1 1.4 1.8 2.4 3.0 58104 SPQ REEL (500 mm) (1) H = 16.0 mm P0 = 15.0 mm 56104 56154 56224 56334 56474 SPQ Bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.1 0.15 0.22 0.33 0.47 6.0 x 14.0 x 12.5 6.0 x 14.0 x 17.5 7.0 x 15.5 x 17.5 8.5 x 17.0 x 17.5 10.0 x 18.5 x 17.5 1000 1500 800 700 550 500 Bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm Bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm Notes (1) Reel diameter = 356 mm, is available on request (2) Weight for short lead product only Pitch: 7.5 mm; C-tol = 10 % CATALOG NUMBER BFC2 339..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (2) Short leads It = 3.5 + 1/- 0.5 mm Pitch = 7.5 ± 0.4 mm; dt = 0.50 ± 0.05 mm 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 4.0 x 9.0 x 10.0 0.45 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 5.0 x 10.5 x 10.0 0.6 0.047 0.056 6.0 x 11.5 x 10.0 0.8 Notes (1) H (2) Weight AMMOPACK (1) Long leads It = 25.0 ± 2.0 mm H = 18.5 mm P0 = 12.7 mm SPQ SPQ It = 5.0 ± 1.0 mm SPQ 10102 10122 10152 10182 10222 10272 10332 10392 10472 10562 10682 10822 10103 10123 10153 10183 10223 10273 10333 10393 10473 10563 12102 12122 12152 12182 12222 12272 12332 12392 12472 12562 12682 12822 12103 12123 12153 12183 12223 12273 12333 12393 12473 12563 1500 1000 750 14102 14122 14152 14182 14222 14272 14332 14392 14472 14562 14682 14822 14103 14123 14153 14183 14223 14273 14333 14393 14473 14563 1000 1250 1000 18102 18122 18152 18182 18222 18272 18332 18392 18472 18562 18682 18822 18103 18123 18153 18182 18223 18273 18333 18393 18473 18563 1250 1000 750 = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information for short lead product only www.vishay.com 4 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Bent back pitch: 7.5 mm (only taped); C-tol = ± 10 % CATALOG NUMBER BFC2 339..... AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) MASS (g) (2) LOOSE IN BOX AMMOPACK H = 16.0 mm P0 = 15.0 mm 68683 68823 68104 SPQ REEL (500 mm) (1) H = 16.0 mm P0 = 15.0 mm 66683 66823 66104 66124 66154 66184 66224 66274 66334 66394 66474 SPQ Vishay BCcomponents Bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.068 5.0 x 13.0 x 12.5 0.9 0.082 6.0 x 14.0 x 12.5 1.1 0.1 Bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.12 6.0 x 14.0 x 17.5 1.4 0.15 Bent back pitch = 7.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.18 7.0 x 15.5 x 17.5 1.8 0.22 0.27 8.5 x 17.0 x 17.5 2.4 0.33 0.39 10.0 x 18.5 x 17.5 3.0 0.47 Notes (1) Reel diameter = 356 mm, is available on request. (2) Weight for short lead product only 1300 1000 1900 1500 - 800 - - 700 550 500 Pitch: 7.5 mm; C-tol = ± 5 % CATALOG NUMBER BFC2 339..... AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (2) Short leads It = 3.5 + 1/- 0.5 mm It = 5.0 ± 1.0 mm SPQ Long leads It = 25.0 ± 2.0 mm SPQ AMMOPACK (1) H = 18.5 mm P0 = 12.7 mm SPQ Pitch = 7.5 ± 0.4 mm; dt = 0.50 ± 0.05 mm 0.001 50102 52102 54102 0.0012 50122 52122 54122 0.0015 50152 52152 54152 0.0018 50182 52182 54182 0.0022 50222 52222 54222 0.0027 50272 52272 54272 0.0033 50332 52332 54332 0.0039 50392 52392 54392 0.0047 4.0 x 9.0 x 10.0 0.45 50472 52472 1500 54472 0.0056 50562 52562 54562 0.0068 50682 52682 54682 0.0082 50822 52822 54822 0.01 50103 52103 54103 0.012 50123 52123 54123 0.015 50153 52153 54153 0.018 50183 52183 54183 0.022 50223 52223 54223 0.027 50273 52273 54273 0.033 50333 52333 54333 5.0 x 10.5 x 10.0 0.6 1000 0.039 50393 52393 54393 0.047 50473 52473 54473 6.0 x 11.5 x 10.0 0.8 750 0.056 50563 52563 54563 Notes (1) H = In-tape height; P = Sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com 1000 1250 1000 38102 38122 38152 38182 38222 38272 38332 38392 38472 38562 38682 38822 38103 38123 38153 38183 38223 38273 38333 38393 38473 38563 1250 1000 750 www.vishay.com 5 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Bent back pitch: 7.5 mm (only taped); C-tol = ± 5 % CATALOG NUMBER BFC2 339..... AND PACKAGING C (µF) DIMENSIONS wxhxl (mm) MASS (g) (2) LOOSE IN BOX AMMOPACK H = 16.0 mm P0 = 15.0 mm 0.9 1.1 1.0 1.4 78683 78823 78104 SPQ REEL (500 mm) (1) H = 16.0 mm SPQ P0 = 15.0 mm 76683 76823 76104 76124 76154 76184 76224 8.5 x 17.0 x 17.5 10.0 x 18.5 x 17.5 2.4 3.0 76274 76334 76394 500 550 800 700 1900 1500 1100 Bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 Notes (1) Reel diameter = 356 mm, is available on request (2) Weight for short lead product only 5.0 x 13.0 x 12.5 6.0 x 14.0 x 12.5 5.0 x 13.0 x 17.5 6.0 x 14.0 x 17.5 1300 1000 1250 Bent back pitch = 7.5 ± 0.4 mm; dt = 0.60 ± 0.06 mm Bent back pitch = 7.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 7.0 x 15.5 x 17.5 1.8 Pitch: 10.0 mm; C-tol = ± 20 % CATALOG NUMBER BFC2 339..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) AMMOPACK (1) H = 18.5 mm P0 = 12.7 mm LARGE REEL (500 mm) (1) (2) H = 18.5.mm P0 = 15.0 mm Short leads Long leads It = It = It = SPQ 3.5 + 1/- 0.5 mm 5.0 ± 1.0 mm 25.0 ± 2.0 mm Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 0.068 0.1 Notes (1) H SPQ SPQ SPQ 21102 21152 21222 21332 21472 4.0 x 10.0 x 12.5 0.6 21682 21103 21153 21223 21333 21473 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.82 1.1 21683 20104 23102 23152 23222 23332 23472 23682 23103 23153 23223 23333 23473 23683 22104 1000 750 1000 25102 25152 25222 25332 25472 25682 25103 25153 25223 25333 25473 25683 24104 1000 750 1250 27102 27152 27222 27332 27472 27682 27103 27153 27223 27333 27473 27683 28104 750 600 26104 1500 950 - = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only (2) Reel www.vishay.com 6 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 10.0 mm; C-tol = ± 10 % CATALOG NUMBER BFC2 339..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) AMMOPACK (1) H = 18.5 mm P0 = 12.7 mm LARGE REEL (500 mm) (1) (2) H = 18.5.mm P0 = 15.0 mm Vishay BCcomponents Short leads Long leads It = It = SPQ 3.5 + 1/- 0.5 mm 5.0 ± 1.0 mm Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 Notes (1) H It = 25.0 ± 2.0 mm SPQ SPQ SPQ 11102 11122 11152 11182 11222 11272 11332 11392 11472 11562 4.0 x 10.0 x 12.5 0.6 11682 11822 11103 11123 11153 11183 11223 11273 11333 11393 11473 5.0 x 11.0 x 12.5 0.82 11563 10683 10823 10104 13102 13122 13152 13182 13222 13272 13332 13392 13472 13562 13682 13822 13103 13123 13153 13183 13223 13273 13333 13393 13473 13563 12683 12823 12104 1000 1000 15102 15122 15152 15182 15222 15272 15332 15392 15472 15562 15682 15822 15103 15123 15153 15183 15223 15273 15333 15393 15473 15563 14683 14823 14104 1000 1250 17102 17122 17152 17182 17222 17272 17332 17392 17473 17562 17682 17822 17103 17123 17153 17183 17223 17273 17333 17393 17473 17563 18683 18823 18104 750 950 - 16683 16823 16104 1900 1500 6.0 x 12.0 x 12.5 1.1 750 750 600 = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only (2) Reel Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 7 MKP 339 X2 Vishay BCcomponents Pitch: 10.0 mm; C-tol = ± 5 % CATALOG NUMBER BFC2 339..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) Short leads Long leads AMMOPACK (1) H = 18.5 mm P0 = 12.7 mm SPQ LARGE REEL (500 mm) (1) (2) H = 18.5.mm P0 = 15.0 mm SPQ Interference Suppression Film Capacitors MKP Radial Potted Type It = It = It = SPQ 3.5 + 1/- 0.5 mm 5.0 ± 1.0 mm 25.0 ± 2.0 mm Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 Notes (1) H SPQ 51102 51122 51152 51182 51222 51272 51332 51392 51472 51562 4.0 x 10.0 x 12.5 0.6 51682 51822 51103 51123 51153 51183 51223 51273 51333 51393 51473 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.82 1.1 51563 50683 50823 53102 53122 53152 53182 53222 53272 53332 53392 53472 53562 53682 53822 53103 53123 53153 53183 53223 53273 53333 53393 53473 53563 52683 52823 1000 750 1000 55102 55122 55152 55182 55222 55272 55332 55392 55472 55562 55682 55822 55103 55123 55153 55183 55223 55273 55333 55393 55473 55563 54683 54823 1000 750 1250 48102 48122 48152 48182 48222 48272 48332 48392 48473 48562 48682 48822 48103 48123 48153 48183 48223 48273 48333 48393 48473 48563 38683 38823 750 600 46683 36104 36823 1900 1500 950 - = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only (2) Reel www.vishay.com 8 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 15.0 mm; C-tol = ± 20 % CATALOG NUMBER BFC2 339..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) It = 3.5 ± 0.3 mm Pitch = 15 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 6.0 x 12.0 x 17.5 1.4 5.0 x 11.0 x 17.5 1 90001 90002 90003 90004 90005 90006 21104 20154 90007 90008 90009 90011 90012 90013 23104 22154 1000 1250 90014 90015 90016 90017 90018 90019 25104 24154 1000 1000 90021 90022 90023 90024 90025 90026 27104 26154 900 1100 Short leads It = 5.0 ± 1.0 mm SPQ Long leads It = 25.0 ± 2.0 mm SPQ REEL (500 mm) (1) (2) H = 18.5.mm P0 = 12.7 mm SPQ Vishay BCcomponents Pitch = 15 ± 0.4 mm; dt= 0.80 ± 0.08 mm 0.22 0.33 0.47 0.47 0.56 0.68 Notes (1) H 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x16.5 x 17.5 8.5 x 17.5 x 17.8 10.0 x 18.5 x 17.8 11.0 x 18.5 x 17.8 1.8 2.4 3 3.1 4.3 5.5 20224 20334 20474 90165 90174 90168 22224 22334 22474 90166 90175 90169 750 750 500 300 225 225 24224 24334 24474 90143 90176 90145 500 500 450 500 350 350 26224 26334 26474 - 800 650 600 - = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only (2) Reel Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 9 MKP 339 X2 Vishay BCcomponents Pitch: 15.0 mm; C-tol = ± 10 % CATALOG NUMBER BFC2 339..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS wxhxl (mm) MASS (g) (3) It = 3.5 ± 0.3 mm Pitch = 15 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 6.0 x 12.0 x 17.5 1.4 5.0 x 11.0 x 17.5 1.0 90027 90028 90029 90031 90032 90033 90034 90035 90036 90037 11683 11823 11104 10124 10154 90039 90041 90042 90043 90044 90045 90046 90047 90048 90049 13683 13823 13104 12124 12154 1000 1250 90052 90053 90054 90055 90056 90057 90058 90059 90061 90062 15683 15823 15104 14124 14154 1000 1000 90064 90065 90066 90067 90068 90069 90071 90072 90073 90074 17683 17823 17104 16124 16154 900 1100 Short leads It = 5.0 ± 1.0 mm SPQ Long leads It = 25.0 ± 2.0 mm SPQ REEL (500 mm) (1) (2) H = 18.5.mm P0 = 12.7 mm SPQ Interference Suppression Film Capacitors MKP Radial Potted Type Pitch = 15 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.18 0.22 0.27 0.33 0.33 0.39 0.47 0.56 Notes (1) H 7.0 x 13.5 x 17.5 1.8 10184 10224 10274 10334 10394 10474 90167 12184 12224 12274 12334 12394 12474 90157 750 14184 14224 14274 14334 74334 14394 14474 90144 500 16184 16224 16274 16334 16394 16474 - 800 8.5 x 15.0 x 17.5 9.3 x 14.0 x 18.3 10.0 x16.5 x 17.5 10.0 x 18.5 x 17.8 2.4 2.9 3.0 4.3 750 500 225 500 500 450 400 650 600 - = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only (2) Reel www.vishay.com 10 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 15.0 mm; C-tol = ± 5 % CATALOG NUMBER BFC2 339..... AND PACKAGING DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) It = 3.5 ± 0.3 mm Pitch = 15 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.01 0.012 0.015 0.018 0.022 0.027 5.0 x 11.0 x 17.5 1.0 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 6.0 x 12.0 x 17.5 1.4 0.15 Pitch = 15 ± 0.4 mm; dt= 0.80 ± 0.08 mm 0.18 7.0 x 13.5 x 17.5 1.8 0.22 8.5 x 15.0 x 17.5 2.4 0.27 0.33 0.39 10.0 x 16.5 x 17.5 3.0 Notes (1) H Vishay BCcomponents C (µF) REEL (500 mm) (1) (2) Long leads H = 18.5.mm P0 = 12.7 mm SPQ SPQ Short leads It = 5.0 ± 1.0 mm 90232 90233 90234 90235 90236 90237 90238 90239 90241 90242 53683 53823 52104 52124 52154 52184 52224 52274 52334 52394 SPQ It = 25.0 ± 2.0 mm 90243 90244 90245 90246 90247 90248 90249 90251 90252 90253 55683 55823 54104 54124 54154 54184 54224 54274 54334 54394 90221 90222 90223 90224 90225 90226 90227 90228 90229 90231 51683 51823 50104 50124 50154 50184 50224 50274 50334 50394 1250 1000 1000 1000 90254 90255 90256 90257 90258 90259 90261 90262 90263 90264 46683 46823 36104 36124 36154 36184 36224 36274 36334 36394 1100 900 750 750 500 500 500 450 800 650 600 = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only (2) Reel Pitch: 22.5 mm; C-tol = ± 20 % CATALOG NUMBER BFC2 339..... AND PACKAGING DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) Short leads It = 5.0 ± 1.0 mm 23154 23224 23334 23474 22684 22105 90138 SPQ Long leads It = 25.0 ± 2.0 mm 25154 25224 25334 25474 24684 24105 90139 SPQ REEL (500 mm) (1) (2) H = 18.5.mm P0 = 12.7 mm SPQ C (µF) It = 3.5 ± 0.3 mm Pitch = 22.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.15 21154 6.0 x 15.5 x 26.0 2.4 0.22 21224 0.33 21334 0.47 7.0 x 16.5 x 26.0 2.9 21474 0.68 8.5 x 18.0 x 26.0 3.8 20684 1.0 10.0 x19.5 x 26.0 6.8 20105 1.5 12.3 x 22.3 x 26.3 10 90103 Notes (1) H (2) Reel 300 200 200 200 140 250 250 250 200 400 27154 27224 27334 27474 26684 26105 90141 600 500 450 350 300 = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 11 MKP 339 X2 Vishay BCcomponents Pitch: 22.5 mm; C-tol = ± 10 % CATALOG NUMBER BFC2 339..... AND PACKAGING DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) Short leads It = 5.0 ± 1.0 mm 13124 13154 13184 13224 13274 13334 13394 13474 12564 12684 12824 12105 200 200 200 150 300 SPQ Long leads It = 25.0 ± 2.0 mm 15124 15154 15184 15224 15274 15334 75334 15394 15474 75474 14564 14684 14824 14105 800 250 800 250 200 200 250 SPQ REEL (500 mm) (1) (2) H = 18.5.mm P0 = 12.7 mm SPQ Interference Suppression Film Capacitors MKP Radial Potted Type C (µF) It = 3.5 ± 0.3 mm Pitch = 22.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.12 0.15 0.18 0.22 0.27 0.33 0.33 0.39 0.47 0.47 0.56 0.68 0.82 1.0 Notes (1) H 11124 11154 6.0 x 15.5 x 26.0 2.4 11184 11224 11274 11334 8.4 x 14.0 x 26.3 7.0 x 16.5 x 26.0 8.4 x 14.0 x 26.3 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 3.6 2.9 3.6 3.8 6.8 7.8 11394 11474 10564 10684 10824 10105 17124 17154 17184 17224 17274 17334 17394 17474 16564 16684 16824 16105 500 450 350 300 600 = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only (2) Reel Pitch: 22.5 mm; C-tol = ± 5 % CATALOG NUMBER BFC2 339..... AND PACKAGING DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) Short leads It = 5.0 ± 1.0 mm 53124 53154 53184 53224 53274 53334 53394 53474 52564 52684 52824 52105 200 200 200 150 300 SPQ Long leads It = 25.0 ± 2.0 mm 55124 55154 55184 55224 55274 55334 55394 55474 54564 54684 54824 54105 250 250 200 200 250 SPQ REEL (500 mm) (1) (2) H = 18.5.mm P0 = 12.7 mm SPQ C (µF) It = 3.5 ± 0.3 mm Pitch = 22.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Notes (1) H 51124 51154 6.0 x 15.5 x 26.0 2.4 51184 51224 51274 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x19.5 x 26.0 12.0 x22.0 x 26.0 2.9 3.8 6.8 7.8 51334 51394 51474 50564 50684 50824 50105 46124 46154 46184 46224 46274 46334 46394 46474 36564 36684 36824 36105 500 450 350 300 600 = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information diameter = 356 mm is available on request (3) Weight for short lead product only (2) Reel www.vishay.com 12 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type Pitch: 27.5 mm; C-tol = ± 20 % DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 33 ..... AND PACKAGING LOOSE IN BOX Short leads Long leads It = It = SPQ 5.0 ± 1.0 mm 25.0 ± 2.0 mm 90078 23684 23105 22155 22225 22335 22475 100 100 100 100 100 50 90081 25684 25105 24155 24225 24335 24475 Vishay BCcomponents C (µF) MASS (g) (1) It = 3.5 ± 0.3 mm 90076 21684 21105 20155 20225 20335 20475 SPQ Pitch = 27.5 ± 0.4 mm; dt= 0.80 ± 0.08 mm 0.47 9.0 x 19.0 x 31.0 5.5 0.68 1.0 11.0 x 21.0 x 31.0 7.4 1.5 13.0 x 23.0 x 31.0 9.2 2.2 15.0 x 25.0 x 31.0 12.3 3.3 18.0 x 28.0 x 31.0 16.1 4.7 21.0 x 31.0 x 31.0 20.3 Notes (1) Weight 150 125 125 125 100 75 for short lead product only Pitch: 27.5 mm; C-tol = ± 10 % DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 339..... AND PACKAGING LOOSE IN BOX Short leads Long leads It = It = SPQ 5.0 ± 1.0 mm 25.0 ± 2.0 mm 13684 13824 13105 12125 12155 12185 12225 12275 12335 12395 100 100 100 100 100 50 15684 15824 15105 14125 14155 14185 14225 14275 14335 14395 C (µF) MASS (g) (1) It = 3.5 ± 0.3 mm 11684 11824 11105 10125 10155 10185 10225 10275 10335 10395 SPQ 150 125 125 125 100 75 Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.68 9.0 x 19.0 x 31.0 5.5 0.82 11.0 x 21.0 x 31.0 7.4 1.0 1.2 1.5 13.0 x 23.0 x 31.0 9.2 1.8 15.0 x 25.0 x 31.0 12.3 2.2 2.7 18.0 x 28.0 x 31.0 16.1 3.3 21.0 x 31.0 x 31.0 20.3 3.9 Notes (1) Weight for short lead product only Pitch: 27.5 mm; C-tol = ± 5 % DIMENSIONS wxhxl (mm) CATALOG NUMBER BFC2 339..... AND PACKAGING LOOSE IN BOX Short leads Long leads It = It = SPQ 5.0 ± 1.0 mm 25.0 ± 2.0 mm 53684 53824 53105 52125 52155 52185 52225 52275 52335 100 100 100 100 100 50 55684 55824 55105 54125 54155 54185 54225 54275 54335 C (µF) MASS (g) (1) It = 3.5 ± 0.3 mm 51684 51824 51105 50125 50155 50185 50225 50275 50335 SPQ 150 125 125 125 100 75 Pitch = 27.5 ± 0.4 mm; dt = 0.80 ± 0.08 mm 0.68 9.0 x 19.0 x 31.0 5.5 0.82 11.0 x 21.0 x 31.0 7.4 1.0 1.2 13.0 x 23.0 x 31.0 9.2 1.5 1.8 15.0 x 25.0 x 31.0 12.3 2.2 18.0 x 28.0 x 31.0 16.1 2.7 3.3 21.0 x 31.0 x 31.0 20.3 Notes (1) Weight for short lead product only Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 13 MKP 339 X2 Vishay BCcomponents APPROVALS SAFETY APPROVALS X2 EN 60384-14 (ENEC) (= IEC 60384-14 ed-3) UL1414 and CSA-C22.2 No. 1 UL1283 CSA-E384-14 VOLTAGE 310 Vac 250 Vac 305 Vac 310 Vac VALUE 1 nF to 4.7 µF 1 nF to 1 µF 1 nF to 4.7 µF 1 nF to 4.7 µF FILE NUMBERS FI 2008038 Interference Suppression Film Capacitors MKP Radial Potted Type E112471 E109565 pending CQC 07001021281 (L) CQC 310Vac 1 nF to 4.7 µF CQC03001006960 (s) CQC 06001018290 (F) CB Test Certificate 310 Vac 1 nF to 4.7 µF FI 5123 The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the ENEC-Agreement): Austria; Belgium; Czech.Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom. ® 16 MOUNTING CQC Normal Use The capacitors are designed for mounting on printed circuit boards.The capacitors packed in bandoliers are designed for mounting in pinted-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to “Packaging Information”. www.vishay.com/docs/28139/packinfo.pdf Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests,it must be insured that the stand-off pips are in good contact with the printed circuit board: • For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped. Space Requirements on Printed Circuit Board The maximum length and width of film capacitors is shown in the drawing: • Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned • Product heigth with seating plane as given by “IEC 60717” as reference: hmax. ≤ h + 0.3 mm or hmax. ≤ h’ + 0.3 mm. Eccentricity bmax. = b + 0.3 mm Storage Temperature lmax. = l + 0.3 mm • Storage temperature: Tstg = - 25 to + 40 °C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 ± 1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ± 2 %. For reference testing, a conditioning period shall be applied over 96 ± 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. www.vishay.com 14 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type CHARACTERISTICS Capacitance as a function of ambient temperature (typical curve) 4 ∆ C/C ( %) Vishay BCcomponents Impedance as a function of frequency (typical curve) 10 3 Impedance (%) 1n F 4.7 nF 10 nF 2 typical 0 max. 101 47 nF 10 0n F 47 0 10 nF 00 nF 47 00 nF -2 10 0 -4 min. 10-1 -6 - 50 0 50 Tamb (°C) 100 10-2 4 10 10 5 10 6 10 7 f (Hz) 108 Tanget of loss angle as a function of frequency (typical curve) 103 Dissipation factor (x 10-4) Resonant frequency as a function of capacitance (typical curve) 102 f (MHz) 101 102 101 µF > 1 µF C ≤1 C F < 20 nF 2 0n 22 C ≤ F F < ≤ 47 n n 47 F < C nF 0 10 n C≤1 X2 100 100 101 102 103 104 f (Hz) 105 10-1 1 10 100 1000 C (nF) 10 000 Max RMS voltage as a function of frequency (typical curve) 10 3 Max. RMS current as a function of frequency (typical curve) AC current (mA) 10 4 4700 nF AC voltage (V) 10 3 1000 nF 470 nF 10 2 10 2 100 nF 47 nF 10 1 10 nF 4.7 nF 10 0 Tamb ≤ 110 °C 10 1 1 10 10 2 1nF Tamb ≤ 110 °C 10 3 10 4 f (Hz) 10 5 10-1 101 10 2 10 3 10 4 f (Hz) 105 Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 15 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type Insulation resistance as a function of ambient temperature (typical curve) 106 105 104 0 20 40 60 80 100 Tamb (°C) APPLICATION NOTES • For X2 electromagnetic interference suppression in standard across the line applications (50/60 Hz) with a maximum mains voltage of 310 Vac. • For series impedance applications we refer to application note www.vishay.com/docs/28153/anaccaps.pdf • These capacitors are not intended for cotinuous pulse application. For these situations capacitors of the AC and pulse programs must be used. • The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C ≤ 470 nF and 110 °C for C > 470 nF. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 Vdc and divided by the applied voltage. INSPECTION REQUIREMENTS GENERAL NOTES 1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC publication IEC 60384-14 ed-3 and specific reference data. Group C inspection requirements SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° No visible damage As specified in section “General data” of this specification RC (s) CONDITIONS PERFORMANCE REQUIREMENTS www.vishay.com 16 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST 4.4 Resistance to soldering heat Vishay BCcomponents CONDITIONS No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s PERFORMANCE REQUIREMENTS 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 ± 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination Capacitance Tangent of loss angle No visible damage Legible marking ¦ΔC/C¦ ≤ 5 % of the value measured initially. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured initially Insulation resistance SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.20 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 ± 0.5 min 4.6 Rapid change of temperature θA = - 55 °C θB = + 110 °C 5 cycles Duration t = 30 min 4.6.1 Inspection 4.7 Vibration Visual examination Mounting: see section “Mounting” of this specification Procedure B4 Frequency range: 10 to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 h 4.7.2 Final inspection 4.9 Shock Visual examination Mounting: see section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s² Duration of pulse: 11 ms As specified in section “Insulation Resistance” of this specification No visible damage Legible marking No visible damage No visible damage Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 17 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type CONDITIONS Visual examination Capacitance Tangent of loss angle SUB-CLAUSE NUMBER AND TEST 4.9.2 Final measurements PERFORMANCE REQUIREMENTS No visible damage ¦ΔC/C¦ ≤ 5 % of the value measured initially. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured initially Insulation resistance SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance Measured in 4.4.2 and 4.9.2 Tangent of loss angle: Measured initially in C1A and C1B 4.11.2 Dry heat 4.11.3 Damp heat cyclic Test Db First cycle 4.11.4 Cold 4.11.5 Damp heat cyclic Test Db remaining cycles 4.11.6 Final measurements Visual examination Temperature: - 55 °C Duration: 2 h Temperature: 110 °C Duration: 16 h As specified in section “Insulation Resistance” of this specification No visible damage Legible marking ¦ΔC/C¦ ≤ 5 % of the value measured in 4.11.1. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.11.1. Capacitance Tangent of loss angle Voltage proof 1350 Vdc; 1 min between terminations Insulation resistance SUB GROUP C2 4.12 Damp heat steady state 4.12.1 Initial measurements 56 days; 40 °C; 90 to 95 % RH no load Capacitance Tangent of loss angle: at 1 kHz No permanent breakdown or flash-over ≥ 50 % of values specified in section “Insulation Resistance” of this specification www.vishay.com 18 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 MKP 339 X2 Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST 4.12.3 Final measurements Vishay BCcomponents CONDITIONS Visual examination Capacitance Tangent of loss angle PERFORMANCE REQUIREMENTS No visible damage Legible marking ¦ΔC/C¦ ≤ 5 % of the value measured in 4.12.1. Increase of tan δ: ≤ 0. 008 for: C ≤ 1 µF or ≤ 0. 005 for: C > 1 µF Compared to values measured in 4.12.1. Voltage proof 1350 Vdc; 1 min between terminations Insulation resistance SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X2: 2.5 kV for C ≤ 1 µF X2: 2.5 kV/√C for C > 1 µF 4.14 Endurance Max. 24 pulses Duration: 1000 h 1.25 x URac at 110 °C Once in every hour the voltage is increased to 1000 Vrms for 0.1 s via resistor of 47 Ω ± 5 % 4.14.7 Final measurements Visual examination Capacitance Tangent of loss angle No permanent breakdown or flash-over ≥ 50 % of values specified in section “Insulation Resistance” of this specification No self healing breakdowns or flashover No visible damage Legible marking ¦ΔC/C¦ ≤ 10 % compared to values measured in 4.13.1. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.13.1. Voltage proof 1350 Vdc; 1 min between terminations. 2120 Vac; 1 min between terminations and case. Insulation resistance No permanent breakdown or flash-over ≥ 50 % of values specified in section “Insulation Resistance” of this specification Document Number: 28138 Revision: 06-Oct-08 For technical questions, contact: RFI@vishay.com www.vishay.com 19 MKP 339 X2 Vishay BCcomponents Interference Suppression Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST SUB-GROUP C4 4.15 Charge and discharge CONDITIONS PERFORMANCE REQUIREMENTS 10 000 cycles charged to 435 Vdc Discharge resistance: 435 Vdc R = ---------------------------------------------1.25 × C ( dU ⁄ dt ) 4.15.1 Initial measurements Capacitance Tangent of loss angle: For C ≤ 1 µF at 10 kHz For C > 1 µF at 1 kHz 4.15.3 Final measurements Capacitance ¦ΔC/C¦ ≤ 10 % compared to values measured in 4.15.1. Increase of tan δ: ≤ 0.008 for: C ≤ 1 µF or ≤ 0.005 for: C > 1 µF Compared to values measured in 4.15.1. Tangent of loss angle Insulation resistance SUB-GROUP C5 4.16 Radio frequency characteristic SUB-GROUP C6 4.17 Passive flammability Class B Bore of gas jet: Ø 0.5 mm Fuel: butane Test duration for actual volume V in mm³: V ≤ 250: 10 s 250 < V ≤ 500: 20 s 500 < V ≤ 1750: 30 s V > 1750: 60 s One flame application Resonance frequency ≥ 50 % of values specified in section “Insulation Resistance” of this specification ≥ 0.9 times the value as specified in section “Resonant Frequency” of this specification. After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C7 4.18 Active flammability 20 cycles of 2.5 kV discharges on the test capacitor connected to URac The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. www.vishay.com 20 For technical questions, contact: RFI@vishay.com Document Number: 28138 Revision: 06-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1