BFP193TW

BFP193T/BFP193TW/BFP193TRW Vishay Telefunken Silicon NPN Planar RF Transistor Electrostatic sensitive device. Observe precautions for handling. Applications For low noise and high gain applications such as power amplifiers up to 2 GHz and for linear broadband amplifiers. Features D Low noise figure D High transition frequency fT = 8 GHz D Excellent large signal behaviour 2 1 1 2 13 653 13 566 13 654 13 566 3 4 4 3 BFP193TW Marking: W19 Plastic case (SOT 343) 1 = Collector, 2 = Emitter, 3 = Base, 4 = Emitter BFP193TRW Marking: W91 Plastic case (SOT 343R) 1 = Collector, 2 = Emitter, 3 = Base, 4 = Emitter 2 1 94 9279 13 579 3 4 BFP193T Marking: 193 Plastic case (SOT 143) 1 = Collector, 2 = Emitter, 3 = Base, 4 = Emitter Document Number 85015 Rev. 1, 20-Jan-99 www.vishay.de • FaxBack +1-408-970-5600 1 (6) BFP193T/BFP193TW/BFP193TRW Vishay Telefunken Absolute Maximum Ratings Tamb = 25_C, unless otherwise specified Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Total power dissipation Junction temperature Storage temperature range Test Conditions Symbol VCBO VCEO VEBO IC Ptot Tj Tstg Value 20 12 2 80 420 150 –65 to +150 Unit V V V mA mW °C °C Tamb ≤ 45 °C Maximum Thermal Resistance Tamb = 25_C, unless otherwise specified Parameter Test Conditions Junction ambient on glass fibre printed board (25 x 20 x 1.5) mm3 plated with 35mm Cu Symbol RthJA Value 250 Unit K/W www.vishay.de • FaxBack +1-408-970-5600 2 (6) Document Number 85015 Rev. 1, 20-Jan-99 BFP193T/BFP193TW/BFP193TRW Vishay Telefunken Electrical DC Characteristics Tamb = 25_C, unless otherwise specified Parameter Collector cut-off current Collector-base cut-off current Emitter-base cut-off current Collector-emitter breakdown voltage Collector-emitter saturation voltage DC forward current transfer ratio Test Conditions VCE = 20 V, VBE = 0 VCB = 10 V, IE = 0 VEB = 1 V, IC = 0 IC = 1 mA, IB = 0 IC = 50 mA, IB =5 mA VCE = 8 V, IC = 30 mA Symbol Min Typ Max Unit ICES 100 mA ICBO 100 nA IEBO 1 mA V(BR)CEO 12 V VCEsat 0.1 0.5 V hFE 50 100 150 Electrical AC Characteristics Tamb = 25_C, unless otherwise specified Parameter Transition frequency Collector-base capacitance Collector-emitter capacitance Emitter-base capacitance Noise figure Test Conditions VCE = 8 V, IC = 50 mA, f = 1 GHz VCB = 10 V, f = 1 MHz VCE = 10 V, f = 1 MHz VEB = 0.5 V, f = 1 MHz VCE = 8 V, IC = 10 mA, ZS = ZSopt, ZL = 50 W, f = 900 MHz VCE = 8 V, IC = 10 mA, ZS = ZSopt, ZL = 50 W, f = 2 GHz VCE = 8 V, IC = 30 mA, ZS = ZSopt, ZL = 50 W, f = 900 MHz VCE = 8 V, IC = 30 mA, ZS = ZSopt, ZL = 50 W, f = 2 GHz VCE = 8 V, IC = 30 mA, Z0 = 50 W, f = 900 MHz VCE = 8 V, IC = 30 mA, Z0 = 50 W, f = 2 GHz VCE = 8 V, IC = 50 mA, f = 900 MHz Symbol fT Ccb Cce Ceb F F Gpe Gpe S21e2 S21e2 IP3 Min 6 Typ 8 0.5 0.25 1.6 1.2 2.1 18 12 15 9 33 Max 0.9 Unit GHz pF pF pF dB dB dB dB dB dB dBm Power gain Transducer gain Third order intercept point at output Document Number 85015 Rev. 1, 20-Jan-99 www.vishay.de • FaxBack +1-408-970-5600 3 (6) BFP193T/BFP193TW/BFP193TRW Vishay Telefunken Dimensions of BFP193TW in mm 96 12237 Dimensions of BFP193TRW in mm 96 12238 www.vishay.de • FaxBack +1-408-970-5600 4 (6) Document Number 85015 Rev. 1, 20-Jan-99 BFP193T/BFP193TW/BFP193TRW Vishay Telefunken Dimensions of BFP193T in mm 96 12240 Document Number 85015 Rev. 1, 20-Jan-99 www.vishay.de • FaxBack +1-408-970-5600 5 (6) BFP193T/BFP193TW/BFP193TRW Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 www.vishay.de • FaxBack +1-408-970-5600 6 (6) Document Number 85015 Rev. 1, 20-Jan-99