BPW46

BPW46 Vishay Telefunken Silicon PIN Photodiode Description BPW46 is a high speed and high sensitive PIN photodiode in a flat side view plastic package. Due to its waterclear epoxy the device is sensitive to visible and infrared radiation. The large active area combined with a flat case gives a high sensitivity at a wide viewing angle. Features D D D D D D D Large radiant sensitive area (A=7.5 mm2) Wide angle of half sensitivity ϕ = ± 65° High photo sensitivity Fast response times Small junction capacitance Clear plastic case Suitable for visible and near infrared radiation 94 8632 Applications High speed photo detector Absolute Maximum Ratings Tamb = 25_C Parameter Reverse Voltage Power Dissipation Junction Temperature Storage Temperature Range Soldering Temperature Thermal Resistance Junction/Ambient Test Conditions Tamb Symbol VR PV Tj Tstg Tsd RthJA Value 60 215 100 –55...+100 260 350 Unit V mW °C °C °C K/W x 25 °C t x5s Document Number 81524 Rev. 2, 20-May-99 www.vishay.de • FaxBack +1-408-970-5600 1 (5) BPW46 Vishay Telefunken Basic Characteristics Tamb = 25_C Parameter Breakdown Voltage Reverse Dark Current Diode Capacitance Open Circuit Voltage Temp. Coefficient of Vo Short Circuit Current Temp. Coefficient of Ik Reverse Light Current g Test Conditions IR = 100 mA, E = 0 VR = 10 V, E = 0 VR = 0 V, f = 1 MHz, E = 0 VR = 3 V, f = 1 MHz, E = 0 Ee = 1 mW/cm2, l = 950 nm Ee = 1 mW/cm2, l = 950 nm EA = 1 klx Ee = 1 mW/cm2, l = 950 nm Ee = 1 mW/cm2, l = 950 nm EA = 1 klx, VR = 5 V Ee = 1 mW/cm2, l = 950 nm, VR = 5 V Symbol V(BR) Iro CD CD Vo TKVo Ik Ik TKIk Ira Ira Min 60 Typ 2 70 25 350 –2.6 70 47 0.1 75 50 ±65 900 600...1050 4x10–14 100 100 Max 30 40 Unit V nA pF pF mV mV/K mA mA %/K mA mA deg nm nm W/√ Hz ns ns 40 Angle of Half Sensitivity Wavelength of Peak Sensitivity Range of Spectral Bandwidth Noise Equivalent Power VR = 10 V, l = 950 nm Rise Time VR = 10 V, RL = 1k W, l = 820 nm Fall Time VR = 10 V, RL = 1k W, l = 820 nm lp l0.5 NEP tr tf ϕ Typical Characteristics (Tamb = 25_C unless otherwise specified) I ra rel – Relative Reverse Light Current 1000 I ro – Reverse Dark Current ( nA ) 1.4 1.2 100 l=950nm VR=5V 1.0 10 0.8 VR=10V 1 20 40 60 80 100 0.6 0 94 8416 20 40 60 80 100 94 8403 Tamb – Ambient Temperature ( °C ) Tamb – Ambient Temperature ( °C ) Figure 1. Reverse Dark Current vs. Ambient Temperature Figure 2. Relative Reverse Light Current vs. Ambient Temperature www.vishay.de • FaxBack +1-408-970-5600 2 (5) Document Number 81524 Rev. 2, 20-May-99 BPW46 Vishay Telefunken 1000 Ira – Reverse Light Current ( m A ) CD – Diode Capacitance ( pF ) 80 E=0 f=1MHz 60 100 10 40 1 VR=5V l=950nm 20 0.1 0.01 94 8417 0 0.1 1 10 94 8407 0.1 1 10 100 Ee – Irradiance ( mW / cm2 ) VR – Reverse Voltage ( V ) Figure 3. Reverse Light Current vs. Irradiance 1000 Ira – Reverse Light Current ( m A ) Figure 6. Diode Capacitance vs. Reverse Voltage S ( l ) rel – Relative Spectral Sensitivity 1.0 0.8 0.6 0.4 0.2 0 350 100 10 VR=5V 1 0.1 101 94 8418 102 103 104 94 8420 550 750 950 1150 EA – Illuminance ( lx ) l – Wavelength ( nm ) Figure 4. Reverse Light Current vs. Illuminance 100 Ira – Reverse Light Current ( m A ) 1 mW/cm2 0.5 mW/cm2 Figure 7. Relative Spectral Sensitivity vs. Wavelength 0° 10 ° 20 ° 30° S rel – Relative Sensitivity 40° 1.0 0.9 0.8 0.7 50° 60° 70° 80° 0.6 0.4 0.2 0 0.2 0.4 0.6 0.2 mW/cm2 10 0.1 mW/cm2 0.05 mW/cm2 l=950nm 1 0.1 94 8419 1 10 100 94 8406 VR – Reverse Voltage ( V ) Figure 5. Reverse Light Current vs. Reverse Voltage Figure 8. Relative Radiant Sensitivity vs. Angular Displacement Document Number 81524 Rev. 2, 20-May-99 www.vishay.de • FaxBack +1-408-970-5600 3 (5) BPW46 Vishay Telefunken Dimensions in mm 96 12196 www.vishay.de • FaxBack +1-408-970-5600 4 (5) Document Number 81524 Rev. 2, 20-May-99 BPW46 Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 Document Number 81524 Rev. 2, 20-May-99 www.vishay.de • FaxBack +1-408-970-5600 5 (5)